erbium doped fiber gain ase light source

Brand Name:YOUCII

Model Number:U8142CL

Place of Origin:China

...ASE Light Source In CL Band Is Amplified By Erbium-Doped Fiber Gain U8142CL CL band ASE light source is a high performance broadband light source. It uses erbium-doped fiber gain amplification, spectrum flattening technology, and butterfly package device to form a single band continuous output light source through high stability drive control circuit. The U8142CL band light source...

Brand Name:Fiberroad

Model Number:FR-6000S-LAxx/Gxx-x

Place of Origin:China

Single Edfa Optical Amplifier / Fixed Gain Erbium Doped Fiber Amplifier Single Erbium-Doped Fiber Amplifier is Fiberroad company launched EDFA amplifiers, it does not light - electricity - light can directly convert the optical signal regeneration, thus ...

Place of Origin:ShenZhen

Brand Name:Fiberroad

Model Number:FR-6000S-LAxx/Gxx-x

Single Edfa Optical Amplifier / Fixed Gain Erbium Doped Fiber Amplifier Single Erbium-Doped Fiber Amplifier is Fiberroad company launched EDFA amplifiers, it does not light - electricity - light can directly convert the optical signal regeneration, thus ...

Brand Name:Olycom

Model Number:OM3800-EDFA

Place of Origin:CE RoHS FCC

Hot-swappable EDFA Optical Amplifier Card Product Features Low Noise Coefficient: Typical value of 5dB. High Gain Flatness: DWDM wavelength gain flatness <1.5dB. Multiple Operating Modes: Supports adjustable AGC gain, adjustable APC output, and adjustable ...

Brand Name:KCO, Kocent Optec Limited

Model Number:ST/UPC, ST/APC

Place of Origin:Guangdong, China

... on IEC/Telcordia Bell GR-326-Core Tested - Metal ion doped fiber - High-power light source durability - Attenuation levels ranging from 1dB to 25dB - 1310nm, 1550nm and 1310/1550nm dual wave lengths Applications: - Erbium Doped Fiber Amplifiers (EDFA)

Brand Name:KCO, Kocent Optec Limited

Model Number:ST/UPC, ST/APC

Place of Origin:Guangdong, China

...Fiber Optic Attenuator 1dB - 30dB For Local Area Networks Features: - High precision. - Good stability. - Small size and bulk. - Easy to operate. - Wavelength independence - Based on IEC/Telcordia Bell GR-326-Core Tested - Metal ion doped fiber - High-power light source durability - Attenuation levels ranging from 1dB to 25dB - 1310nm, 1550nm and 1310/1550nm dual wave lengths Applications: - Erbium Doped Fiber...

Brand Name:FOCABLE

Model Number:E2000/UPC Fiber Optic Attenuator

Place of Origin:China

...Fiber Attenuator E2000 / UPC 5dB High Stability Fiber Telecom Use E2000/UPC fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing(DWDM) and Erbium Doped Fiber Amplifier(EDFA)applications where the receiver can't accept the signal generated from a high-power light source. Fiber...

Brand Name:HICORPWELL

Model Number:FC SC LC APC Optic Attenuators

Place of Origin:China

...Fiber Optic Attenuation Plug-in Type fiber optic attenuator is a passive device used to reduce the amplitude of a light signal without significantly changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source...

Brand Name:FOCC

Model Number:FOCC - ATT013

Place of Origin:China

... significantly Variable the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot accept the signal generated from a high-power light source.

Brand Name:bcx

Model Number:bcx-1500

Place of Origin:china

... more high-power laser diode arrays. The pumped light is coupled into the rare earth doped fiber as a gain medium by a special pump structure. The photons at the pump wavelength are absorbed by the doped fiber medium to form a particle number inversion.

Brand Name:HanWei

Model Number:HW-FS-1500W/2000W3000w/4000w/6000w

Place of Origin:China

... as a gain medium. Fiber lasers can be developed based on fiber amplifiers: under the action of pump light, high power density can easily form in the fiber, causing a "particle number inversion" of the laser energy level of the working material.

Brand Name:Hilink

Model Number:HL-EDFA

Place of Origin:China

High Gain 1U 19'' 1550nm EDFA FTTX PON Network OTN GENERAL Our module light pumped laser and Erbium-Doped Fiber is used by the JDSU and FITEL etc .We have reliable optical light power output stabilizing circuit and laser electrical refrigerator temperature...

Place of Origin:China

Brand Name:DONGWE

Model Number:DW-EDFA55MO

...a gain spectrum bandwidth at 1540 ~ 1563nm high power multi output optical fiber amplifier. Imported brands of pump laser and the United States OFS erbium doped fiber, 1RU frame, the total output power can be > 1000mW, can provide at most 16 light output...