eddy current non destructive testing probe

Place of Origin:XIAMEN,china

Brand Name:COBE

...eddy current testing system 1, intro This off-line eddy currment detecting equlipment is used in high accuracy flaw testing for workplece that already be finished. Automatic testing procedure: Using up-loading system, via roller way, the workpiece was sent to the eddy current detecting area, through magnetic saturation, probe...

Brand Name:SINOWON

Model Number:TG-400

Place of Origin:DONGGUAN CHINA

Features: ● With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate. ● Five types of probes (F400, F1, F10, N1, ...

Brand Name:TMTeck

Place of Origin:China

tubing ID PROBES for eddy current Flaw Detection Good probe design and proper probe structure can enhance the defect signal which is difficult to detect and make it easy to be detected. With many years of probe production experience, careful design and ...

Brand Name:HUATEC

Model Number:Near-field probe

Place of Origin:China

Near-field Eddy Current stainless steel shell Probe The eddy current sensor is based on the principle of electromagnetic induction. It generates an alternating magnetic field through a coil. When approaching a conductive object, the magnetic field will ...

Brand Name:GTJ

Model Number:GTJ-L800

Place of Origin:China

... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the

Brand Name:iqualitrol

Model Number:SRT-6210

High Accuracy Easy Use Non Destructive Portable Surface Roughness Tester with RS232 Model: SRT-6210 Download Technical Data: iqualitrol Surface Roughness Tester SRT-6210 When measuring the roughness of surface, the sensor is placed on the surface and then ...

Brand Name:EPRO

Model Number:PR6424/010-140

Place of Origin:Germany

PR6424/010-140 EPRO 16mm Eddy Current Sensor PR6424/010-140.pdf Product Details: Manufacture: EPRO Model:PR6424/010-140 Ordering Information: PR6424/010-140 Catalog PR6424 Description: EPRO PR6424/010-140 EPRO 16mm Eddy Current Sensor HS Code: 85389091 ...

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's

Brand Name:HUATEC

Model Number:HEF-C35RFT

Place of Origin:China

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Brand Name:iqualitrol

Model Number:iOMC-E

Integrated Built in Probe for Single-hand Operation Coating Thickness Gauge with USB Connection Summary: A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical ...

Brand Name:Btutest

Model Number:BTU-CWG

Place of Origin:Made in China

Crack Width Gauge Concrete Testing Equipment Features: Newly upgraded, with three proof shell design, waterproof, dustproof and shockproof; Imported sensor chip is adopted, with high test accuracy; The host screen is provided with scale marks, which is ...

Model Number:MD-4G

Place of Origin:CHINA

...Non Destructive Testing Equipment 5%~40% Moisture Meter This moisture meter can detect the water composition of a wide range of materials such as wood, bamboo, cotton, tabacco, paper and etc. It has wide measuring range of 5% to 40% moisture level. It has 4 steel sharp probes...

Brand Name:Raytech

Model Number:RTG-510

Place of Origin:China

... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN

Brand Name:HUIWEI

Model Number:RD-2805

Place of Origin:ZHEJIANG, CHINA

Portable Industrial Xray Machine for Advanced Non-Destructive Testing and Inspection in Industrial Applications Main introduction: RD-2805 is an X-ray machine with automatic intelligent training machine control system. Its biggest feature is its high ...

Brand Name:MITECH

Model Number:MFD660C

Place of Origin:China

Configuration No. Item Qty Remarks Standard config. 1 Main unit 1 With full digital TFT LCD Display 2 Straight Beam Probe 1 4 MHz, Φ10 3 Angle Beam Probe 1 4 MHz, 8 mm×9 mm, 60° 4 Probe Cable 1 Q9-C5,or optional C9- C5 5 Battery Module 1 8.8 amp hour (MB-...

Brand Name:LEEB

Model Number:Leeb251A

Place of Origin:China

Eddy Current Coating Thickness Gauge NFe Metal Probe Limit Setting Function High Quality NFe Metal Probe And Limit Setting Function Fun Coating Thickness Gauge Functions & Features ● High quality metal probes. ● Two measuring methods:continuous and single; ● Two working mode: direct and batch; ● Limit setting function. ● Switch off automatically or manually. Measuring Materials Eddy Current (NFe): Measuring the thickness of Non...

Model Number:3300

Place of Origin:China

Brand Name:OEM

Non-contact type high reliability 3300 Series of electric eddy current sensor 3300 Series of electric eddy current sensor can non-contact measurement of the measured metal conductor and the probe surface relative displacement, has high reliability, wide ...

Place of Origin:China

Brand Name:CHENGFENG

... in both laboratories and engineering sites. 2. Scope of application: This instrument adopts magnetic and eddy current thickness measurement methods, which can non-destructive measure the thickness of non-conductive coatings (such as oxide film, enamel,

Brand Name:Emerson

Model Number:PR6423/004-010

Place of Origin:Germany

... turbomachinery applications such as steam, gas, compressor and hydro turbomachinery, blowers and fans. The purpose of a displacement probe is to measure position or shaft movement without contacting the measured surface – the rotor. In the case of