earphone cable bending testing

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:YUYANG

Model Number:YY616

Place of Origin:China

...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test...

Brand Name:MIYU

Model Number:MY-XC-360

Place of Origin:China

... Test speed: 5-60 times / minute adjustable 4. Test times: 99999999 times 5. Rotation mode: forward rotation mode, reverse rotation mode, positive and negative rotation mode 6. Test mode: life test, continuity test 7. Counterweight: 50g,100g ,200g ,300g ,

Brand Name:Sinuo

Model Number:SN1112R

Place of Origin:China

... system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

...power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test rate 10-60 times/min adjustable Bending Angle 10 ° to 180 ° is adjustable Work station 6 plugs and

Place of Origin:CHINA

Brand Name:YOUBI

Model Number:UP-4040

... Pulg Wire Swing Cable Bending Test Machine for Electrical Wire Description: Wire bending and swing testing machine, also known as wire bending and swing testing machine, is an abbreviation for swing testing machine. This testing machine complies with the ...

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the

Brand Name:CHENGFENG

Model Number:CF8464

Place of Origin:China

...testing of the bending performance of mining cables and complies with the requirements of Article 5.8.8 (Appendix D) of GB12972.1. The radius of the sample bending fixture: R150±10mm, 200±10mm, and R250±10mm can be replaced. Test speed: Adjustable from 0.1 to 1m/s. Sample length: For type 05, samples can be made in lengths of 2M, 3M, 4M and 5M. Type 010 can be used to test...

Brand Name:SKYLINE

Model Number:SL-C110

Place of Origin:China

...testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test...

Brand Name:JIEDONG

Model Number:JD-3003

Place of Origin:Guangdong, China

...Bending Test Machine 1 Station Test Swing Angle 0-360 Degrees Wire Torsion Testing Machine JD-3003 product description: Designed and manufactured according to GB4909.4, ISO2627/R957, CNS-1111/8938, UDC621.315.14/620.175 and JIS3005, suitable for small household appliances such as hair dryers, hair clips, power cords for manufacturers and quality inspection departments. Torque test, electrical connection of earphone cable, data cable

Brand Name:Kingpo

Model Number:GX-4020-A

Place of Origin:China

... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the

Brand Name:HeJin

Model Number:HJ0608A

Place of Origin:China

...Cable Flexing Test Equipment for Power Cord Bending & Fatigue Life Testing | IEC Test Equipment Manufacturer Product introduction: Designed for repeatable and reliable cable bending tests, this IEC 60335-1 compliant Cable Flexing Test Equipment evaluates the mechanical durability and fatigue life of power cords and flexible cables...