cuni 10 kl finned tube condenser

Brand Name:DELLOK

Model Number:Type L fin tube / Tension wound fin tube

Place of Origin:China

..., Shot BlastingApplication of SA214 ERW Tubes: For high, middle, low pressure boiler and pressure purpose Detail: Cuni 90/10 KL footed aluminum finned tubes with13 fins per inch General specifications of L type fin tubes Tube OD : 50.8mm max. Tube Length :

Brand Name:YUHONG

Model Number:ASTM B111 C70600

Place of Origin:China

... for heat exchange in a variety of industries, such as food, electronics, petrochemical, texitle and pharmaceutical industries. What is ASTM B111? This specification covers seamless tube and

Brand Name:Yuhong

Model Number:ASTM B111 C70600

Place of Origin:China

...ASTM B111 / ASME SB111 Application: Sea-water and brackish water heat exchangers, condensers, coolers Chemical Composition (Cu-Ni 90/10) Element Content (%) Copper (Cu) ≥ 88.6 (balance) Nickel (Ni) 9.0 – 11.0 Iron (Fe) 1.0 – 1.8 Manganese (Mn) ≤ 1

Brand Name:Reliance

Model Number:KL

Place of Origin:China.Imported materials are available.

...Varnish, Passivation, Phosphating, Shot Blasting Detail: Cuni 90/10 KL footed aluminum finned tubes with13 fins per inch General KL Type production capacity General specifications of KL Type fin tubes Finning Facility: 7 finning machines; Daily capacity up

Brand Name:YUHONG

Model Number:Wound Fin Tube , L Type fin tube

Place of Origin:China,Korea

...Fin Tube, ASME SA179 With Aluminum 1060, L Type Fin Tube for Air Cooler and Condenser Applications Product Specifications Attribute Value Base Tube Material Aluminum 1060 Base Tube Standard ASTM A179, ASME SA179 Type Wound, L type, LL Type, KL Type Application Air cooler, Cooling Tower, Heat Exchanger, Condenser Fin type L Type Fin Tube, LL Type Fin Tube, KLM Fin Tube Fin...

Brand Name:YUHONG

Model Number:SGCC FB

Place of Origin:CHINA

Fin Tube Clamps Carbon Steel SGCC FB Galvanized Surface​ Definition The isolation ring fin tube clamps, also known as fin tube bands, pipe hoop or tube straps, is suitable for aluminum fin tubes, extruded fin tubes, L/LL/KL fin tubes, and most commonly for G-base fin tubes. Fin tube clamps are mechanical fasteners used to secure finned tubes in heat exchangers, condensers...

Brand Name:TORICH

Model Number:Aluminium Finned Tubes

Place of Origin:Zhejiang China

...OD 10-55mm Base tube’s range of WT 1-3mm Fin thickness range 0.3-1.5mm Fin height range 10-18mm Product processing requirements for embedded spiral finned tube (embedded) equipment 1 mosaic depth and stability 1.1 pull off force test: more than 8kg or

Brand Name:OEM/ODM

Model Number:Customized

Place of Origin:CHINA

...*2.0 Φ41 10*0.3 5.0/6.0/8.0 SS-AL BGL Φ21*2.0 Φ41 10*0.3 3.2/5.0/6.0 SS-SS Φ21*2.0 Φ41 10*0.3 3.2/5.0/6.0 Φ21*2.0 Φ51 15*0.3 3.2/5.0/6.0 Φ25*2.0 Φ45 10*0.3 3.2/5.0/6.0 Φ25*2.0 Φ55 15*0.3 3.2/5.0/6.0 Copper-Al Φ16*1.0 Φ36 10*0.2 3.2/4.2/5.0/6.5

Brand Name:Joyruns

Model Number:6mm to 88.9mm

Place of Origin:Changzhou

... corrosion resistance, especially in marine saltwater environments. The main, wrought copper-nickel alloys chosen for seawater service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to

Brand Name:TOBO

Model Number:TOBO-94

Place of Origin:China

...Tests and many years of service in tide water stations indicates to be an excellent condenser tube alloy for salt water use. Copper nickel tubes 90-10% 706 are normaly produced in annealed temper. Feasible Dimensions Copper Nickel tube C70600 ASTM B111 The

Brand Name:Senphus

Model Number:CuNi10/NC015/2.0811/C70700

Place of Origin:Jiangsu, China

CuNi Alloy Copper-Nickel Alloy CuNi10 NC015 2.0811 C70700 for condenser tubes piping system and smarine applications CuNi10 is a copper-nickel alloy containing approximately 90% copper and 10% nickel, with small amounts of iron and manganese for enhanced ...

Brand Name:YUHONG

Model Number:TUBE BUNDLE

Place of Origin:CHINA

... Steel Tube Bundle For Heat Exchanger,Condensers C70600 (90-10 CuNi) copper-nickel alloy tube bundles are one of the most classic, widely used, and cost-effective tube materials for shell-and-tube heat exchangers (especially condensers) handling seawater...

Brand Name:VOLVO

Model Number:F26004

Place of Origin:China

...condenser in the VOLVO S40 2.4T 10 BEFORE/2.5T OLD typically incorporates the following components: Tubes: Heat exchange is made possible by refrigerant gas passing through the small tubes in the condenser. These tubes are arranged to maximize surface area and facilitate effective heat transmission. Fins: To improve surface area and heat dissipation, the tubes are equipped with thin metal fins...

Brand Name:Kaideli

Model Number:KCFP

Place of Origin:China

...Condensing Unit Compressor Advantages of our condensing unit: 1),Condensing unit for medium and high temperature environment(+12℃~-10℃) 2), Also for low temperature and frost temperature(-10℃~-30℃) 3), With compresser 4),Condenser was punched by high velocityram machine,coil and fin using mechanical tube expansion,with high heat exchanging capacity; 5),shell and tube condensers...

Brand Name:XMK

Model Number:FNF-10.2/50

Place of Origin:China

...condenser coil / condenser FNF-10.2/50 for condensing unit Specifications: Features 1. Customer make for you 2. Superior cooling performance 3. Good quality 4. Various model for choosing Description: Fin spacing: 1.8-3.5mm Aluminum foil: Hydrophilic or bare Copper tube...

Brand Name:GAOYI

Place of Origin:CHINA

... mm Φ55 mm 15 mm 0.3 mm 3 mm Φ32x3 mm Φ62 mm 15 mm 0.3 mm 3 mm Other finned tube size can be customized. 2.

Brand Name:TISCO Pohang Yongjin

Model Number:TOBO-933

Place of Origin:jiangsu,china

...CUNI 90/10 C70600 C71500 TUBE Copper Nickel Pipe Scope of application: Good thermal conductivity, copper tube copper tube copper pipe is also known as copper tube. A kind of non-ferrous metal pipe. Pressed and drawn seamless tubes. Lightweight. High low temperature strength. It is often used in the manufacture of heat exchange equipment (such as condensers...

Brand Name:XMK

Model Number:FNF-10.2/50

Place of Origin:China

...condenser coil / condenser FNF-10.2/50 for condensing unit Specifications: Features 1. Customer make for you 2. Superior cooling performance 3. Good quality 4. Various model for choosing Description: Fin spacing: 1.8-3.5mm Aluminum foil: Hydrophilic or bare Copper tube...

Brand Name:TOBO

Model Number:90-10

Place of Origin:China

...CUNI Coil 2 - 10-100mm 90-10 Customized Hot Rolled The Copper Nickel Sheet is also used in hydraulic tubing and brake tubing. The Cupronickel Sheet can be found in important equipment like seawater cooling, firewater systems, etc. As they show good performance at a high temperature and pressure, the Copper Nickel Alloy Sheet is also an eminent part of heat exchangers and condensers...