corrugated casing bending test apparatus

Brand Name:Sinuo

Model Number:SN2905

Place of Origin:China

... materials. First, according to IEC61386-22 Section 10.4.103 and Figure 101, bend to the left at an angle of 90°±5°, and return to the vertical position. After 1 minute, bend to the right again at 90°±5°, and then return to the vertical position and

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

... of cord of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a weight having a mass of 0,5 kg. A current of about 0,1 A shall be passed through the conductors. The sample shall be bent backwards and forwards in a

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:AI

Model Number:AIBXW-16

Place of Origin:CHINA

...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending...

Brand Name:LONROY

Place of Origin:Guangdong, China

...case bending testing machine Mobile phone case bending testing machine is mainly used for mobile phone protection for bending test;During the test, the sample is fixed on the fixture, and repeated bending is carried out under the specified bending Angle and times to judge the bending strength. Mobile phone case bending testing machine Product parameters: Test station 1 Test Angle 10-150 (touch screen setting) Test...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

...Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus...

Brand Name:RECEN

Model Number:RC-TM-003

Place of Origin:China

Electro-Hydraulic Servo Microcomputer Control Universal Test Machine Compression Bending Product Profile The testing machine is mainly suitable for steel strand stretching and metal material stretching, compression, bending, shearing and other tests. ...

Brand Name:HTI

Model Number:TX-513

Place of Origin:Guangdong,China(mainland)

...Test Apparatus Footwear Testing Equipment in Laboratory Description: Sole adhesive or suture zone in the surface of canvas, cloth tape and then set the wheels of this machine, start the wheels, shoe soles that are bent, bending, after a certain number to view the damage and fracture shoe case, in order to understand their resistance to bending properties. Specification: While test...

Brand Name:VOUCH

Model Number:5910

Place of Origin:CHINA

...Test Apparatus For Building Material With Standard ASTM D2843 Building material smoke density test ,use for test building material static state smoke density in the condition of burning or decompose ,by test the loss of light in test case ,can watch flame and smoke during testing. Model:5910 Standard:ASTM D 2843 SMOKE DENSITY TEST GB/T 8627 SMOKE TEST Features: case...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:GC

Place of Origin:China

... Corrugated Carton Resistance Analyzer Packaging Compression Bending Testing Equipment Product Description The bending stiffness tester is an instrument used to test the bending stiffness of paper and paperboard. It can also be used to test the bending ...

Brand Name:ASLI

Model Number:AS-PC-10000

Place of Origin:China

..., leather belt composite, plastic profile, waterproof coil, steel pipe, copper, profile, spring steel, Stretching, compression, bending, shearing, peeling, tearing,

Brand Name:Infinity Machine

Model Number:IN-3004

Place of Origin:Made in China

... board, it reflects a dynamic impact resistance capability of corrugated board and corrugated case. It also reflects the capability of packing box protecting the product from being damaged when having instantaneous impact of external forces. Standard:

Brand Name:PERFECT

Model Number:PT-1176S

Place of Origin:Dongguan, Guangdong,China

Surgical Mask Tensile Testing Machine 10N 50N 150N Tensile Tester For Medical Masks 10S Holding PT-1176S Double Control Tensile Testing Machine.pd... Description: Surgical Mask Tensile Testing Machine is also called universal testing machine. with ...

Brand Name:HAIDA

Model Number:HD-B609

Place of Origin:Guangdong, China (Mainland)

...), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. 2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. 3. Deformation under defined load: Test deformation under defined load of

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

180-degress, Wire/Cable Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. ...