copper sputtering target high density

Brand Name:JINXING

Model Number:Copper Rotatable Sputtering Target

Place of Origin:China

... of impurity content, Ag content can be controlled below 0.1ppm and s content below 0.02ppm The content of gas elements (C, O, N, H) is less than 1ppm Main uses: 6N copper has

Brand Name:LHTI

Model Number:titanium target

Place of Origin:China

... Replace different target materials (such as aluminum, copper, stainless steel, titanium, nickel targets, etc.), you can get different film systems (such as super-hard, wear-resistant, anti-corrosion alloy film, etc.). (1) Metal targets: nickel target, Ni,

Brand Name:Forged

Place of Origin:Luoyang

Model Number:customized

high purity 99.95% zirconium sputtering target coating materials customization Zirconium Description Zirconium and zirconium alloys have low density, high specific strength, corrosion resistance, radiation resistance, excellent wear resistance, excellent processing performance, non-toxic,non-magnetic, compared with traditional stainless steel, copper...

Brand Name:ZCQ

Model Number:ZCQ

Place of Origin:China

High temperature resistant high quality fused silica sputtering target Silicon dioxide sputtering target contains Si and O. Silicon dioxide (SiO2), also known as Silica, is a natural compound made from two of the most abundant materials on the planet: ...

Brand Name:GNEE

Model Number:TiP0001

Place of Origin:Henan

Pure Titanium 99.99% 4n Disc High Purity Ti Metal Sputtering Target Titanium is metallic and ductile. Sound travels at a rate of 5,090 m/s. The main characteristics of titanium are low density, high mechanical strength and easy processing. The new titanium...

Brand Name:Hypersolid Metal

Place of Origin:China

... to corrosion. Molybdenum is widely used in sputtering applications. Shape and Structure: Molybdenum Sputtering Targets are typically disc-shaped or rectangular in form. They have a flat and uniform surface, ensuring consistent sputtering performance. The

Brand Name:Feiteng

Model Number:Copper Tube Target

Place of Origin:Baoji, Shaanxi, China

...Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port Copper tube is hard in texture, not easy to corrosion, and high temperature and high pressure resistance, can be used in a variety of environments. Compare with this, the shortcoming of

Brand Name:TISCO BAOSTEEL

Model Number:C12000 Copper Sheet

Place of Origin:China

...Copper Flat Sheets High Density 16 Oz Copper Sheet Copper Alloys C10400 is used for electrical and electronic conductors, wave guides, cavity resonators, superconductor matrixes, vacuum tube and solid-state devices, and glass-to-metal seals. Copper Alloys C10400 Chemical Data Copper 99.99 min Phosphorus 0.0003 max Remainder Total 0.004 max Tellurium 0.001 max Principal Design Features Copper...

Brand Name:SEAMOUNT

Model Number:OEM

Place of Origin:China

...wear resistance. 2. It is suitable for high load and low speed rotating motion, swinging motion and frequent opening and closing under load, which is not easy to form hydrodynamic lubrication. 3. Under the ...

Brand Name:Learnew

Model Number:1414 1919 2828 3838 4046

Place of Origin:China

High CRI 3000K 4000K 6500K 36V COB LED Chips Aluminum Copper Substrate 5w 10w 20w 30w 50w 100w 200w high efficiency high CRI 36v 3000K/4000K/6500K white and warm white color LED COB chip Models Consume power CCT LM/W IF VF Circuit CHIPS Whole Size Emit ...

Brand Name:Sanhui

Model Number:Mo1

Place of Origin:Henan, China

...Sputtering Target For Coating Introduction of Molybdenum Sputtering Target Product Name Purity Density Surface Processing Mo target 99.95% 10.22g/cm3 Ground Rolling The molybdenum sputtering target has the characteristics of high purity, high density and fine grain, so that the sputtering efficiency, uniform film thickness and smooth etching surface are obtained in sputtering. There are two kinds of molybdenum sputtering

Brand Name:PRM

Model Number:custom

Place of Origin:China

...Copper Alloy Magnetron Sputtering Target 1. Description of Molybdenum Copper Alloy Magnetron Sputtering Target: The preparation of molybdenum-copper alloy magnetron sputtering targets is mainly by infiltration method. First, molybdenum powder with coarse particle size is used to sinter into a molybdenum billet skeleton, and then infiltrated in copper liquid to obtain molybdenum-copper alloys with different copper...

Brand Name:CSTI

Model Number:20221110

Place of Origin:China

...sputtering target material is produced by the advanced hot isostatic pressing (HIP) process. sputtering target include rectangular target, arc target, ring target and large aspect ratio integrally formed tube target, etc., with controllable purity and density...

Brand Name:PRM

Model Number:custom

Place of Origin:China

...Copper Alloy Magnetron Sputtering Target 1. Description of Molybdenum Copper Alloy Magnetron Sputtering Target: The preparation of molybdenum-copper alloy magnetron sputtering targets is mainly by infiltration method. First, molybdenum powder with coarse particle size is used to sinter into a molybdenum billet skeleton, and then infiltrated in copper liquid to obtain molybdenum-copper alloys with different copper...

Brand Name:Sifon

Model Number:5*W*L

Place of Origin:China

... industry, rare earth industry, chemical equipment area, medical equipment area, melting equipment, oil industry etc. Tungsten targets are our advantaged products. They are covering the target to protect the surface of the target. We can

Brand Name:ROYAL

Model Number:RTAC-SP

Place of Origin:Made in China

... the surface with PVD vacuum coating technology to generate various colors: black, rainbow, gold, copper, brown etc. Sputter Deposition Sputtering is a metal deposition process where the target material is not vaporized using heat, but its metal atoms are

Brand Name:HMD

Model Number:NONE

Place of Origin:CHN

...Sputtering Target plate sheets Product Description - uniform grain with densified microstructure ensures longer use time. - High special strenghth, high melt point - excellent corrosive resistance, good thermal resistance. - professional after-sales service Commodity Name Pure molybdenum sputtering target Density...

Brand Name:chengyue

Model Number:7075

Place of Origin:China

...strength (>500 MPa) and its low density make the material a fit for applications such as aircraft parts or parts subject to heavy wear. While it is less corrosion resistant than other alloys (such as 5052 aluminum alloy, which is exceptionally resistant to