clause annex a calibration device

Brand Name:Sinuo

Model Number:SN2208

Place of Origin:China

...Clause Annex A Calibration Device for Spring Hammer Test Apparatus Product Information: The Calibration Device for Spring Hammer Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-63:1997 Annex A, IEC60068-2-75:1997 Annex B, and etc. The calibration principle of the spring impactor calibration device...

Brand Name:PEGO Electronics

Model Number:PG-SHCC

Place of Origin:China

...75 Annex B.3 and figure B.5 for checking the impact energy accuracy of spring hammer calibration device. The calibation is made with an impact energy of 1J, which is achieved with a height of fall of 408±1mm, with a calibation striking element of 250g. 2.

Brand Name:HongCe

Model Number:SH-08

Place of Origin:China

... Device for Spring operated impact hammers Its design and manufactured according to the test requirements of IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B. Feature: Comply with the requirement of standard IEC60068-2-63 and IEC60068-2-75 Specifications:

Place of Origin:China

Brand Name:KeRang

Calibration Device for Spring Impact Hammer SH-7 Parameters: Accuracy: 0.01J Repeat accuracy: ±0.01J Measurement range: 0~2J Guide groove diameter: 51mm The energy loss of the pendulum: <0.002J Trigger distance: >30mm Balance weight: 2J Copper weight 1 piece Standard: IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B Application: This device...

Brand Name:HJ

Model Number:SH-7

Place of Origin:China

... B.1 Calibration device. Standard description: The spring hammer to be calibrated is put in the release base and is then operated three times by means of the release device; it shall not be released manually. For each operation, the striking element of the

Place of Origin:China

Brand Name:Julixing

... directly, to the energy of a pendulum, calculated from its mass and height of fall. And it's designed with the requirements of Annex B of IEC60068-2-75. Construction: It's maily made of a frame, a bearing, a drag pointer, a pendulum, a release base and a

Brand Name:kingpo

Model Number:YW-1185

Place of Origin:Mainland China

...Lower Guard Recovery Time Test Device Comply with standards: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Model:YW-...

Brand Name:Sinuo

Model Number:SN7713A

Place of Origin:China

... and IEC60950-1:2013 clause 4.6.2, Annex A.3. Equipment Structure The Hot Flaming Oil Test Device is a specialized fire safety testing system designed to evaluate the flammability and fire protection performance of electrical and electronic equipment. It

Brand Name:KINGPO

Place of Origin:China

...Time Integrated Test Device CSG-2 Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Application: It is used to test...

Brand Name:SHC

Model Number:SC-GI

Place of Origin:China

IEC60745-2-5 Circular Saw Lower Guard Integrated IEC Test Equipment Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19, IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time ...