capillary rheometer for thermoplastic

Brand Name:LONROY

Place of Origin:Guangdong, China

...advanced capillary rheometer capable of measuring the rheological properties of polymer material samples at a variety of shear rates and test conditions. The following data are obtained: ...

Brand Name:ZL

Model Number:ZL-3048

Place of Origin:CHINA

... characteristics of the thermoplastic material, for the production and development of important scientific information and a detailed analysis report is to study the rheological properties of the polymer materials, the shear rate ...

Brand Name:MEILONG

Model Number:3/8'' OD x 0.065'' WT

Place of Origin:China

Duplex UNS S32205 Encapsulated Control Line Thermoplastic Encapsulation Material Duplex Stainless S32205, Chemical composition Element Composition, % Chromium 22.0-23.0 Nickel 4.5-6.5 Molybdenum 3.0-3.5 Manganese 2.00 max. Silicon 1.00 max. Carbon 0.030 ...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Thermoplastic melt flow rate (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics...

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

... under certain condition. Melt flow rate (melt index) of thermoplastics is melt mass or volume which flow though the standard capillary die every 10 minutes, indicating by MFR. It’s different from thermoplastics viscosity in molten state. The

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803

... minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials, quality assurance