cable testing equipment with cold bending

Brand Name:KingPo

Place of Origin:China

... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be

Place of Origin:China

Brand Name:HongCe

Model Number:CBT-1

... wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4

Brand Name:SHC

Model Number:SC-DJR

Place of Origin:China

... for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the

Brand Name:Gaoxin

Model Number:GX-4019

Place of Origin:China

...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test,

Brand Name:Infinity Machine

Model Number:RS-8116-6B

Place of Origin:Made in China

... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test ...

Brand Name:I-suntop

Model Number:GF-100

Place of Origin:China

... Testing Equipment Programmable Constant Temperature Humidity cable testing machine is applied to test the materials in heat-resistance, cold-resistance, dry-resistance, moisture-resistance. It is simple to operate and easy program to edit. It can show the

Brand Name:Kinte

Model Number:WH-8801A

Place of Origin:Guangdong,China (Mainland)

...folding strength. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,

Brand Name:Sinuo

Model Number:SNB02C-5kN

Place of Origin:China

... materials such as rubber, plastics, wires and cables, textiles, waterproof materials, non-woven fabrics, metal wires, metal foils, metal plates and metal rods. It can also be used with ...

Place of Origin:China

Brand Name:CHENGFENG

Six Group Swing Testing Machine Suitable for Testing the Bending Strength of Many Kinds of Cables Specification item value Warranty 1 Year Customized support OEM, ODM, OBM, Software reengineering Place of Origin China Guangdong Brand Name CHENGFENG Model ...

Brand Name:DAXIAN

Model Number:DX8323

Place of Origin:China

...Wire Low Temperature Bending Resistance Testing Equipment Scope of application: Applicable to the assessment of the performance of circular cable or circular insulated wire core in the low temperature state. Standards: Meet test standards such as GB2951...

Brand Name:Sinuo

Model Number:SN1112

Place of Origin:China

... 23.4, IEC60335-1: clause 25.14, IEC60745-1: clause 24.12, IEC60227-2: clause 3.2 and etc. It is used to detect the bending resistance of the household appliance power cord in entrance section and verify its reliability. It adopts the motor to drive the

Brand Name:PTE

Model Number:WDW-S5 Computer Servo Control Electronic Cable Testing Equipment

Place of Origin:China

... and manufactured according to ASTM, ISO, DIN, GB etc standards. It is suitable for wide range of material for tension, compression, bending, shearing and low cycle test. With special grips, it can also do very special test as customers request. It is for

Brand Name:HeJin

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Pego Electronics

Model Number:PG-CBT

Place of Origin:China

... clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94, for bending test at low temperature for insulation of cable. The cold bend test is applied to the cores of circular cross-section having an external diameter up to and including 12.5mm,

Brand Name:YUYANG

Model Number:YY616

Place of Origin:China

...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test...

Place of Origin:China

Brand Name:KeRang

... Test Equipment, Medical Device Testing Equipment, Waterproof Test Equipment, Dust Testing Equipment, Flammability Testing Equipment, Electric Testing Equipment, Impact Testing Machine and so on. Over the years, we focus on Laboratory Test Equipment, With

Brand Name:SKYLINE

Model Number:SL-BST016

Place of Origin:China

...Testing Equipment Automatic Plug Wire Swing Durability Tester Wire bending testing machine is suitable for the plug pinouts, power cord, USB cable, headphone cable, audio cable, headphone cable and other products wire rod bending tests or swing test. The specimen is fixed at fixture, and adding certain load, test...

Brand Name:Ai Si Li

Model Number:AS - PB - 6

Place of Origin:CHINA

...Cable Wire Lab Test Equipment Plug Bend Testing Equipment Application: Automatic Cable Wire Lab Test Equipment Plug Bending Tester is applied for bending endurance test for wire connected with plug. This device is designed and manufactured to meet the requirements of UL817, IEC60884, GB2099. Features: 1. Operated by buttons. 2. When test...

Brand Name:HTI

Model Number:HTX-060

Place of Origin:Guangdong,China(mainland)

... leather and other materials or finished products, and to understand the situation of materials or finished products to adapt to cold climate or cold regions. Standard: ASTM-D1790, D1593, JIS-K6545, the HB-T2877 Specification: Temperature range: -50 ° C