cable testing equipment abrasion test apparatus

Brand Name:HongCe

Model Number:HDX1304

Place of Origin:China

...-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking the

Brand Name:Gaoxin

Model Number:GX-4010

Place of Origin:China

...Abrasion Tester In Cable Testing Equipment Silver Color 1.Quick Details: Alternative name Cable abrasion tester Function Test abrasion resistance of cables and wires Feature Electric drive Weight 110kg Volume 65×44×91cm Test standard JIS-C-3005 2.Equipment Description: The wire abrasion tester is used for testing abrasion resistance of cables and wires. 3.Test method: Fix cable...

Brand Name:Kingpo

Place of Origin:China

....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The

Brand Name:SHC

Model Number:SC-DJR

Place of Origin:China

... for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the

Brand Name:I-suntop

Model Number:GFK-1000

Place of Origin:China

...Optical Fiber Cable Impact Testing Machine is intended to determine the ability of optical fiber cable withstand impact. Apparatus The apparatus allows a hammer with a 25mm rounded edge to drop vertically on a cable sample fixed on a flat steel plate. The

Place of Origin:China

Brand Name:KeRang

...Abrasion Test Apparatus HDX1304 Parameters: Power supply AC220V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Standard:IEC60245-1 Rubber insulated cables...

Brand Name:HJ

Model Number:HDX1302

Place of Origin:China

...clause 5.6.3.1; IEC 60245-2 ‘Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods’ clause 3.1 and figure 1; IEC 60227-1 ‘Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V –

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:Ningbo Suntech Power

Model Number:CHX-810KVA/54KV,135KV

Place of Origin:Ningbo，China

...Cable Testing Equipment 30-300Hz ,Resonant Withstand Voltage Test Set Features 1. This withstand voltage equipment has small volume, light weight and portable test system. 2. The power supply adopts 220V single-phase power supply or 380V single power supply, which is convenient for on-site power collection. 3. The reactor adopts dry epoxy pouring, which is beautiful and reliable, suitable for all kinds of cables. 4. Equip...

Brand Name:Fanke High-voltage

Model Number:VLF-80KV/0.1Hz

Place of Origin:China

... with very-low frequency technology for power generators or 35KV and below XLPE power cable.Compared with Hipot test set at main power frequency, VLF HV Test Set just needs much small test power capacity(About 1/500 in theory). Its size and weight also is

Brand Name:RISING

Model Number:RS-TC

Place of Origin:China

... of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing, it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The

Brand Name:DAXIAN

Model Number:DX8349

Place of Origin:China

...Test apparatus for Vertical Flame Propagation of Bundles of Wires and Cables Product description: This equipment is used to evaluate the vertical installation of bunched wire and cable or fiber optic cable under the specified conditions to inhibit the ability of the vertical flame propagation device, the device shell is made of full SUS304 stainless steel, the whole by the test...

Brand Name:LAB TECH

Model Number:CVT-I

Place of Origin:China

Building Material Heat Combustion Testing Equipment ISO1716 Apparatus Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; ISO1716 Bomb Calorimeter is the most common...

Brand Name:SKYLINE

Model Number:SL-L03

Place of Origin:China

... time, and then assess the condition of material surface, weight, volume and thickness, from this standard to assess the abrasive nature of materials. Applicable industry Applied to test leather performance in shoes, clothing, luggage handbag industry,

Place of Origin:China

Brand Name:CHENGFENG

...Cable Flame Propagation and Smoke Testing Equipment Specification Reference standards: ASTME 84, UL910, NFPA262 and other test standards Product Introduction: UL910/NFPA262 Steiner horizontal tunnel furnace is mainly used for the flame retardant performance test of CMP class wires and cables, and is mainly used for cables...

Brand Name:Infinity Machine

Model Number:RS-8116-6B

Place of Origin:Made in China

... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test ...

Brand Name:RY

Model Number:RY-20250424

Place of Origin:China

.../DEUTSCH IPD Cable -40℃~105℃ PVC Quality High-Quality The whole The compressive UVB Qualified Underwater test Pressure Service OEM ODM Accept Our Company: RY Electronic Technology Co., Ltd., with ten years of rich experience, is a company focusing on