| Sign In | Join Free | My insurersguide.com |
|
| Sign In | Join Free | My insurersguide.com |
|
| Categories | Vehicle Detector Sensor |
|---|---|
| Brand Name: | SINOMATIC |
| Model Number: | Digital display dual wave |
| Certification: | CE |
| Place of Origin: | Shenzhen, China. |
| MOQ: | Sample order accepted |
| Price: | US$45~US$55 |
| Payment Terms: | T/T,Western Union,,Ali Pay |
| Supply Ability: | 3000 pcs per month |
| Delivery Time: | 3-7 working days |
| Packaging Details: | Carton |
| Vertical Beam Width: | 35±5° |
| Horizontal Beam Width: | 15±3° |
| Protection rate: | IP67 |
| Detection distance: | 0.5-6 meters, ±0.1 meters |
| Working temperature: | -40℃~+85℃ |
| Dimension: | 127*97*26mm |
| Company Info. |
| SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
| Verified Supplier |
| View Contact Details |
| Product List |
1.Schematic diagram of electromagnetic wave distribution of dual-wave radar
*Width detection antenna electromagnetic distribution: detection width ≥ 1.5-2 meters.
*Height detection antenna electromagnetic distribution: detection height ≥ 1.5-2 meters.
*Electromagnetic wave crossing area.
二,Radar Technical Parameters
1,Input voltage: 12VDC
2,Rated current: 250mA
3,Operating frequency range: 24-24.25GHz4,modulation mode:FMCW
5,X-axis antenna transmit power:10-15dBm
6,X-axis horizontal beam:35±5°
7,X axis vertical beam:15±3°
8,Y-axis antenna transmit power: 10-15dBm
9,Y-axis horizontal beam: 15±3°
10,Y axis vertical beam: 35±5°
11,Detection distance: 0.5-6 meters, ±0.1 meters.
12,Working temperature: -40℃~+85℃
13,Shell size: 127*97*26mm
三,Radar Installation Specifications
1,Please choose a low-noise power adapter above 12VDC 1A for
independent power supply. In the case where the gate opening signal
needs to be
connected in the barrier mode, please connect the radar power
supply and the gate controller power supply to the same ground (GND
is connected).
2,When the gate controller is used for power supply, please ensure that the output voltage of the controller is 12V, and the output current is not less than 250mA.
3,When applied to a small car park, the optimum height from the center of the radar to the ground is 50-60cm. When it is applied to a large car park, the height can be increased appropriately.
4,The distance between the radar center and the fence pole: the octagonal fence pole is not less than 20cm, the right-angle fence is not less than 25cm.
5,The radar mounting surface should be perpendicular to the horizontal plane. And fixed and reliable.
6,The ground within the detection range should be flat without any
obstacles.When the angle between the passing vehicle and the radar
is greater than 30 degrees,please setup
road blocks to guide the vehicle to pass.
| Input voltage | 12VDC |
|---|---|
| Rated current | 250mA |
| Operating frequency range | 24-24.25GHz |
| Modulation mode | FMCW |
| Detection distance | 0.5-6 meters, ±0.1 meters |
| Working temperature | -40℃~+85℃ |
| Shell size | 127*97*26mm |
|
170KHz 4 Increments Adjustable Vehicle Detector ABS PD132
Toll Gate Single Channel Loop Detector Parking Management System Traffic Light Control
100ms CE Access Control Loop Detector Model PD132 20m Wiring For Vehicle
240V 5A 3 Increments Vehicle Loop Detector Reset Switch PD132
Reset Switch Inductive Loop Traffic Detector AC220V 5 Sensitivity 4.5VA
Adjustable 24GHz 1.2W 6m Water-Proof Barrier Gate anti-hit Radar Detector
Anti Smash 1.2W 24GHz RS485 Barrier Gate Radar Sensor
RS485 6m 24GHz Parking Lot Occupancy Barrier Gate Radar Sensor
Single / Double Channel Vehicle Loop Detector For Parking Lot Vehicle Detection
Barrier Gate Bluetooth Radar Detector Non Contact Detection For Vehicles / Pedestrians
