ASME Life Cycle Test Machine for Cookware Durability Testing

APPLICATIONS & TEST PURPOSE:

This machine tests the pull-out lifespan of the pull-out tube, the lifespan of the showerhead button, and the swing of the water outlet to evaluate the quality of the samples.

TEST STANDARD: ASMEA112.18.1-2005; CSAB125.1-05; GB18145; EN817

STANDARD FAETURES:

1. Test samples: 4 sets (1 set of pull-up water divider, 1 set of buttons, 2 sets of left and right swing)

2. Lifting function parameters:
① Function of the water divider: 0-20mm can be set
② Speed range: 0-20 times /min can be set
③ The action mode of the water distributor: The cylinder clamps and pulls down → releases the cylinder

→ returns to the hose, which constitutes one cycle of action

3. Button function parameters:
① Button function: Normal water supply
② Button pressing speed: 5-30 times per minute

4. Left and right swing function parameters:
① Faucet left and right swing function: 2 sets of workstations
② Angle: Adjustable ±90 degrees
③ Speed: 5-30 times per minute

5. Frequency setting: 1 to 99999999 times can be set

6. Control mode: Set by PLC

7. Operating mode: 7 "color touch screen

8. Power Supply: 380V 50HZ

9. Air source: 6kg
10. Material: SUS304 stainless steel
11. Note: The equipment is manufactured based on the design drawings

12. Hot and cold water: American standard water supply method, dynamic pressure 0.3-0.4Mpa

13.① At Workstation 1,

1#water is introduced → the cylinder is lowered → the machine claw grasps and lifts the head → it is lifted up → the machine claw is released → the water circuit is disconnected (this is a cycle), and the count is 1 time. Repeat the above count

2# Pass water → Lower the cylinder → Grasp and lift the head with the machine claw → Lift up → Press down again (Passing water is also fine, not passing water is also fine)
② Workstation 2: Shower head switching life (a. The two cylinders work alternately left and right. b. The cylinders can rotate and move 360°. c. The fixture connected to the shower head can also be adjusted 360°.)
③ Workstation 3 and Workstation 4: A. Add a torque sensor for left and right rotation, which can adjust the force, Angle and switch
B. The Angle can be adjusted. The height of the machine head, front and back, and left and right can all be adjusted.

Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong Province, China, is specialized in production and R&D of various material physical properties testing equipment. We have our own independent research and development center and four testing equipment production lines: textile, footwear, leather, mask. In 2006, textile, footwear, leather mask testing equipment officially put into production and entered the international market.

• Design & Production: Solution Consultation for each order
  Recommend the most cost-performance machine
  Research & Develop the suitable one for Special-designed Model.
• Shipping & Delivery: One-Stop Service
  Production- Deliver to your door - Installation & Training- Technical Support
• Warranty
  1 year warranty with lifetime technology support
• After-Sale Service
  React within 2 Hours
  Video inspection & on-site service combined