Customizable Hydrostatic Pressure Testing Machine for Accurate and
Consistent Results
Product use:
The PVC Plastic Pipe Hydrostatic Burst Pressure Testing Machine,
conforming to ASTM D1598 standards for plastic pipe hydrostatic
pressure testing, is designed to determine two key metrics for
thermoplastic pipes and composite pipes (including PP-R, PP-B,
PP-A, PE, PE-X, PVC, PVC-U, PVC-C, and aluminum-plastic composite
pipes, etc.): the damage resistance time under long-term constant
internal pressure and constant temperature, and the maximum
pressure value of instantaneous burst.
This machine serves as essential testing equipment for plastic pipe
manufacturers and testing institutions, supporting critical quality
verification and compliance assessment workflows.
Features:
1.All control parameters (including pressure, time, and accuracy)
can be inputted or adjusted via either the upper computer
(precision pressure micro-control unit) or the lower computer (PC).
2.The upper and lower computers can display test time (maximum 9999
hours 59 minutes 59 seconds), pressure (with three decimal places),
and eight test states (boost, pressure maintaining, pressure
relief, operation, test completion, leakage, burst, etc.) either
simultaneously or independently. Meanwhile, audio-visual alarms are
activated for four specific states: overpressure, test completion,
leakage, and burst.
3.Thanks to the dual-computer controlled distributed control mode,
the system can continue operating normally even if the lower
computer is disconnected or not powered on for extended periods.
This ensures test data integrity is maintained (with a maximum
retention period of 8760 hours).
4.The system supports observation, analysis, query, storage, and
printing of pressure-time test curves, as well as key parameters
including start time, set time, current time, effective time,
invalid time, remaining time, overpressure time, and pressure
maintaining time.
Meet Standards:
It confirms to ISO 1167, ASTM D1598, ISO9080, CJ/T108 , ASTM F1335
and ASTM D1599, etc.
Technical Parameters:
| Model | XGY-10C, 16C |
| Diameter range | Φ6-1600mm |
| Stations | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 50, 100 etc can customized |
| Control mode | Micro-control, industrial PC control |
| Display mode | Industrial PC LCD color display |
| Storage mode | PC strorage |
| Print mode | Color printer output |
| Test pressure | Pressure range | 4%-100% |
| Control accuracy | ±1% |
| Display resolution | 0.001MPa |
| Working range | 5%~100%FS |
| Indication error | ±1% |
| Test Timer | Timer range | 0~999h59m59s |
| Timer accuracy | ±0.1% |
| Timer resolution | 1s |
| Power | 380V 50Hz three-phase four-wire 1.5KW |
| end caps models | from Φ6 to 1600mm |
| Water tank size | accoard to the pipe size |
| Temperature range | 15-95℃ |
| Dimensions (three stations) | 730×630×1730(mm)or others |
Support and Services:
Technical Support and Service for Hydrostatic Testing Machine
(Plastic Pipe Hydrostatic Pressure Testing Machine)
We offer comprehensive technical support for Hydrostatic Pressure
Testing Machines. Our team of seasoned technical support
specialists is well-equipped to deliver the following value-added
services:
- On-site machine installation and commissioning: Ensures precise
calibration and optimal initial operational readiness, laying a
solid foundation for accurate testing.
- Professional troubleshooting and targeted technical consultation:
Provides efficient solutions for equipment operational anomalies
and in-depth guidance on testing best practices, minimizing
downtime.
- Repair and preventive maintenance services: Covers both corrective
repairs for existing faults and proactive upkeep (e.g., routine
inspections, component servicing) to extend equipment lifespan and
maintain consistent performance.
- Supply of genuine spare parts and consumables: Guarantees full
compatibility with the machine, avoiding mismatches that could
compromise testing accuracy, and ensures reliable performance
post-replacement.
- Timely software updates and upgrades: Aligns the machine’s software
with the latest industry testing standards and functional demands,
enhancing its adaptability to diverse testing scenarios.
We are dedicated to delivering premium customer service and remain
readily accessible to address any inquiries or concerns you may
have regarding the equipment’s operation, maintenance, or
performance. Should you require assistance, please feel free to
reach out to us at your convenience.
FAQ:
Q1: What is the brand name of the Hydrostatic Testing Machine
(Plastic Pipe Hydrostatic Pressure Testing Machine)?
A1: The official brand name of the Hydrostatic Testing Machine
(Plastic Pipe Hydrostatic Pressure Testing Machine) is JHH, with
manufacturing facilities located in Beijing, China.
Q2: What is the core purpose of the Hydrostatic Testing Machine
(Plastic Pipe Hydrostatic Pressure Testing Machine)?
A2: The Hydrostatic Testing Machine (Plastic Pipe Hydrostatic
Pressure Testing Machine) is primarily engineered to assess the
hydrostatic strength and bursting strength of plastic pipes,
serving as a critical tool to verify their compliance with
performance and safety standards.
Q3: Which types of components and materials are compatible with the
Hydrostatic Pressure Testing Machine?
A3: The Hydrostatic Pressure Testing Machine is suitable for
testing plastic pipes and composite pipes, including but not
limited to PP-R, PP-B, PP-A, PVC, PE, PE-X, and other analogous
pipe variants.
Q4: What is the measurement accuracy specification of the
Hydrostatic Pressure Testing Machine?
A4: The Hydrostatic Pressure Testing Machine delivers a
high-precision performance, with a measurement deviation within
0.1% of the full-scale reading, ensuring the reliability of test
data.
Q5: What is the maximum pressure range that the Hydrostatic
Pressure Testing Machine can handle?
A5: The Hydrostatic Pressure Testing Machine is capable of testing
pressures up to 10 MPa, equivalent to 100 bar (1450 psi).
24KW Power Hydro Testing Equipment 1 - 9999h 59min 59s Time Count Range
