IFR32650 24V 25Ah LiFePO4 Battery Pack For Electric Vehicles And Safety Applications

OEM UPS battery pack

Customized LiFePO4 /LI-ion battery pack + charger + BMS. The BMS (Battery Management System that can monitor and equalize each single cell during charge & discharge ) .

Li-ion Battery: 3.7V/7.4V/11.1V/14.8V/22.2V/24V/36V/48V/60V/72V.....

LifePO4 Battery: 3.2V/6.4V/9.6V/12.8V/16V/25.6V/36V/48V/60V/72V...

Capacity: 1.5ah/5ah/10ah/12ah/15ah/20ah/30ah/40ah/50ah/100ah/150ah/200ah/300ah...

1 Pack toughness

Battery pack should have sufficient styength and the Li-Fe cell inside should be protected from mechanical shocks.

2 Cell fixing

The Li-Fe cell should be fixed to the battery pack by its large surface area.

No cell movement in the battery pack should be allowed.

3 Inside design

No sharp edge components should be insides the pack containing the Li-Fe cell.

4 Tab connection Spot welding is recommended for Li-Fe tab connection method.

Battery pack should be designed that shear force are not applied to the Li-Fe tabs.

If apply manual solder met hod to connect tab with PCM.below notice is very important to ensure battery

performance:

◆·The solder iron should be temperature controlled and ESD safe;

◆·Soldering temperature should not exceed 350℃;

◆·Soldering time should not be longer than 3s;

◆·Soldering times should not exceed 5 times,Keep battery tab cold down before next time soldrictly g;

◆·Directly heat cell body is strictly prohibited,Battery may damaged by heat above approx.100℃.

---

Main uses: Solar sytem, UPS, Backup power supply, Marine, RV...

1.electrical and hobby ---E-Bike
2.Emergency power supply, LED light and flashlight.
3.consumer applications
4.electrical tools
5.solar lawn, remote control
6.electric vacuum cleaner, electric sweeper
7.Backup power supply, Medical Device and so on.

---

Everwin Tech Co., Limited was established in 2009 and is a professional battery manufacturer specializing in reserach design and producing power solutions for all kinds of market . EWT Battery provide ODM, OEM battery solutions for medical, solar lighting, smart metering  low speed vehicle and solar power storage system for customers all over the world.

Our products are widely used in various fields such as electric bicycles, electric motorcycles, electric scooters, electric forklifts, outdoor and home energy storage, electric tools, wireless vacuum cleaners, smart homes, security, medical and other fields. We provide a full range of intelligent manufacturing and services, including project evaluation, scheme design, battery pack structure design,  battery pack production, as well as product inspection and after-sales service, aiming to efficiently provide customers with the most competitive lithium battery solutions.