3A 4A 5A 13X Molecular Sieve Desiccant Pellet For Natural Gas Dehydration

3A 4A 5A 13X Zeolite Molecular Sieves Used For Natural Gas Dehydration And Sweetening

Products Introduction

As raw nature gas normally contains saturated water, hydrogen sulfide, carbon dioxide and other impurities. These impurities should be removed as much as possible in order to meet the requirement of marketable gas.

Natual Gas Dehydration

If the temperature of pipeline walls or storage tanks decreases below the dew point of the water vapors present in the gas, the water starts to condense on those cold surfaces, and the following problems can appear:

1. Natural gas in combination with liquid water can form methane hydrate that may plug the valves, the fittings or even pipelines;
2. Natural gas dissolved in condensed water is corrosive, especially when it contains CO₂ or H₂S;
3. Condensed water in the pipeline causes slug flow and erosion;
4. Water vapor increases the volume and decreases the heating value of the gas;
5. Natural gas with the presence of water vapor cannot be operated on cryogenic plants;

Xi'an lvneng has specially designed molecular sieve 3A and molecular sieve 4A with high water adsorption and CO₂ capacity, excellent hydrothermal stability and good dynamic characteristic for natural gas dehydration.

Natural Gas Sweetening

H₂S and CO₂ are commonly found in natural gas, but unfortunately, they get highly corrosive in the presence of H₂O. Natural Gas Sweetening also known as Acid Gas Removal, refers to a group of processes that remove Carbon Dioxide (CO₂) and Hydrogen Sulfide (H₂S) from natural gas.

Xi'an lvneng has specially designed molecular sieve 5A with high mechanical and chemical resistance, accent adsorption capacity for removal of H₂S, CO₂.
Xi'an lvneng has specially designed molecular sieve 13X with high-performance COS removal capacity and excellent crush strength.

Technical Index:

Attention:

1. The product cannot be exposed in the open air and should be stored in dry condition with an air-proof package.
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.

Xi'an Lvneng Purification Technology Co., Ltd., was relocated to Xi'an from Dalian in November 2004. With more than 20 years of management and development, it becomes a key manufacturer of the special type molecular sieve in China, specializes in molecular sieve, activated alumina, and other industrial desiccants.

Xi'an Lvneng Purification Technology Co., Ltd., relying on the professional background of molecular sieve absorbent research and development, production and operation for nearly 30 years have rapidly and steadily developed the foreign markets. In September 2012, the company settled in the Weibei industrial area of Xi'an, with a newly built factory of nearly 8,000 square meters, covering an area of more than 10 mu, with nearly 70 employees, 4 technical researchers, perfect inspection equipment and the technology research & development was in the forefront of the industry. With the completion of the new plant, nearly ten million yuan was invested in the production equipment and the production capacity reached 8,000 tons and its output value has reached over 50 million for two consecutive years. Therefore, it can better meet the sales and operation needs of enterprises.

Xi'an Lvneng Purification Technology Co., Ltd with leading technology and excellent quality as its development objective for many years, has worked closely with Dalian Institute of chemical physics, Chinese Academy of Sciences, Xi 'an institute of high voltage electrical appliances, electrical bureau of machinery industry department, northwest chemical engineering institute, Changqing institute of chemical technology, Daqing petrochemical company and other units to overcome various technical difficulties and steadily improve product quality.

The adsorbent products such as molecular sieve and alumina are widely used in petrochemical, CNG, LNG, industrial gas, compressed air, coal chemical, air separation, refrigeration and construction industries. In particular, with the industrial transformation of the country and the innovation of global industry 4.0, the drying and purification of industrial power gas depend on the upgrading of industrial automation, especially the molecular sieve desiccant.

After 20 years' development in the market, the enterprise still becomes an excellent supplier to a large number of state-owned enterprises, such as Changqing oilfield, Tuha oilfield, Liaohe oilfield, Yanshan petrochemical company, Qingyang petrochemical company, Maoming petrochemical company, China aviation industry group, China shipbuilding industry group and so on. Meanwhile, more than 70% of the adsorbent fillers used in the dehydrated sheath of CNG gas stations in Xinjiang, Shandong, and Hebei regions are our products. In terms of new market development, Xi'an Lvneng Purification Technology Co., Ltd develops foreign trade rapidly and stable on the basis of the strong domestic trade market.

Through Alibaba (China), Kompass (France), Global Sources (the United States), Tendata (Europe), Avention(Europe) and other foreign trade platforms, we have developed a wide range of foreign customers. Currently, our customers are all over Asia, Europe, North America and South America. Alstom (France), Xebec (Canada), Atlas Copco (USA), Danfoss (Denmark), Zarrin Toor Felez (Iran), Saral Azar (Iran) Bhogart LLC (USA), Socane (France), Petro Kimya Akam (Iran), Atlas Caspian (Iran), HD Trading Company (Iran), and Seraj Gostar (Korea), Bioversity (India), etc. Under the efforts of the foreign trade team, the sales revenue of 1.6 million us dollars per year was realized on average in three years, and the special fund of foreign trade subsidy from the provincial department of commerce was obtained for two consecutive years.

Inherit the past and forge ahead into the future, as northwest China's biggest molecular sieve adsorbent manufacturer, leading technology, excellent quality, customized service is our tenet, through the industry-leading new production line, mechanization degree is maximum improved, make our enterprise to adapt to the market and service market better. Thus achieve the sustainable and steady development of enterprises, casting the next brilliant enterprises.