Name: Bronze Bushing 2000 Solid Lubricant Wear Plates 10mm Thickness
Brand: VIIPLUS
Price: 1 USD

Your Partner in Self-Lubricating Bearing Applications

Self-Lubricating Bearing Solutions

Self-lubricating bearings are engineered to operate reliably where conventional lubrication systems fail or become impractical. They are ideal for:

Harsh and maintenance-free environments
Designed to perform under demanding operating conditions while eliminating routine lubrication maintenance.
Long service life with built-in lubrication
Continuous self-lubrication ensures stable performance over extended periods and supports effective cost control.
High load, low speed motion systems
Suitable for rotational, oscillating, and linear reciprocating movements under heavy loads and low velocities.
Applications where traditional lubrication is restricted or impossible
Effective in environments where oil or grease cannot be applied due to technical, safety, or regulatory constraints.
Extreme operating conditions
Reliable performance in dusty environments, under impact loads, or in radiation-exposed applications.

Advantages of Self-Lubricating Bearings

Lower manufacturing costs
No need for oil supply systems, lubrication holes, or oil grooves—reducing machining complexity and production expenses.
Reduced operating and maintenance costs
Minimal lubricant consumption and lower maintenance requirements, while eliminating risks associated with insufficient lubrication.
Simplified design and shorter development cycles
Oil-free operation allows streamlined mechanical structures, reducing design time and overall system cost.
Improved equipment performance and durability
Enhanced reliability, extended service life, and consistent friction performance contribute to better mechanical efficiency.
Environmental and sustainability benefits
No waste oil collection or disposal required, supporting environmentally friendly and clean industrial operations.

Categories	Oilless Bushes
Brand Name:	VIIPLUS
Model Number:	oilless 2000 bushings
Certification:	standard bushing size product
Place of Origin:	oilless bushing
MOQ:	negotiable
Price:	Negotiable
Payment Terms:	T/T
Supply Ability:	plug graphite bearings, China, manufacturers, suppliers, factory, wholesale, Metal Journal Bearing, PTFE Self Lubricating Bearing, Composite Thrust Bearing, Composite Self Lubricating Bushings, Graphite Alloy Bearing, Flange Cast Iron Bearing
Delivery Time:	7-25 work days
Packaging Details:	EXPORT CARTON WOOD PALLET WOODEN CASE
Material:	Solid Lubricant
Featrue:	Maintenance
Lubricating:	Solid Lubricant
Type:	Bushing, Flange, Sliding Plate
Quality:	High quality
Size:	Customized
Bearing Bushing Factory Price:	tiffany@viiplus.com
Self-lubricating Bearing Bushing Manufacturer:	https://www.viiplus.com/
Oilless Bearing Manufacturer:	https://www.bronzelube.com/
Manufacturer:	bucha de bronze grafitado
High Light::	Solid Bronze Plain Bearings, Graphite Flange Bronze Plain Bearings, Mining Machinery
Oilless Bushes:	Oilless Bush. Copper Alloy. Straight type. SOB. Material Base Copper alloy (SO-2). Solid lubricant
Bush Bearings Manufacturers Suppliers Exporters:	plain bearings. Long, maintenance-free service, manufactures bushings in various designs and from different materials. tiffany@viiplus.com, Bushings - Configure and purchase - https://www.viiplus.com/
Oilless Bush Supplier:	www.VIIPLUS.com offers oilless bushings on their website [1]. You can visit their website to explore their product range and make inquiries.

Composition and properties
	dg	DIN	Material No. delivery form1)	Designation	ASTM standard		Proportional weights		Physical properties (min.)


					Standard	Alloy No.	DIN	ASTM	Density	0.2% Strain	Tensile strength	Strain	Emodulus	Hardness	Application

Symbol									ρ	δy	δT
Unit							%	%	g/cm³	MPa	MPa	%	MPa	HB
	01	1705	2.1090.01	CuSn7ZnPb	B 584	C932 00	Cu 81 - 85 Sn 6 - 8 Zn 3 - 5 Pb 5 - 7 permissible max. portions Ni 2.0 Sb 0.3	Cu 81 - 85 Sn 6.3 - 7.5 Zn 2 - 4 Pb 6 - 8 Ni 1 Sb 0.35	8.8	120	240	15	106.000	65	Standard material for the most applications international standardized
			2.1090.03	CuSn7ZnPb	B 271	C932 00			8.8	130	270	13	106.000	75
			2.1090.04	CuSn7ZnPb	B 505	C932 00			8.8	120	270	16	106.000	70
	02	1705	2.1061.01	CuSn12Pb	not yet standardized		Cu 84 - 87 Sn 11 - 13 Pb 1 - 2 permissible Ni 0.8 - 1.5 max. portions Ni 2.0 Sb 0.2 P 0.2	Cu 85 - 88 Sn 10 - 12 Pb 1 - 1.5	8.7	140	260	10	112.000	80	Material for high loads and/or corrosion stress attack international only partially standardized
			2.1061.03	CuSn12Pb	not yet standardized				8.7	150	280	5	112.000	90
			2.1061.04	CuSn12Pb	B 505	C925 00			8.7	140	280	7	112.000	85
	03	1714	2.0975.01	CuAl10Ni	B 584	C955 00	C u min. 75 Al 8.5 - 11.0 Ni 4.0 - 6.5 Fe 3.5 - 5.5 permissible max. portions Mn 3.3	Cu min. 78 Al 10 - 11.5 Ni 3 - 5.5 Fe 3 - 5 Mn max. 3.5	7.6	270	600	12	122.000	140	Material for extreme loads and/or high corrosive environments international standardized
			2.0975.02	CuAl10Ni	B 30	C955 00			7.6	300	600	14	122.000	150
			2.0975.03	CuAl10Ni	B 271	C955 00			7.6	300	700	13	122.000	160
			2.0975.04	CuAl10Ni	B 505	C955 00			7.6	300	700	13	122.000	160
	04	1709	2.0598.01	CuZn25Al5	B584	C863 00	Cu 60 - 67 Al 3 - 7 Fe 1.5 - 4 Mn 2.5 - 5 Zn rest permissible max. portions Ni max. 3	Cu 60 - 66 Al 5 - 7.5 Fe 2 - 4 Mn 2.5 - 5 Zn 22 - 28 Ni max. 1	8.2	450	750	8	115.000	180	Material for highest loads without corrosive attack. international partially standardized to a large extend
			2.0598.02	CuZn25Al5	B 30	C863 00			8.2	480	750	8	115.000	180
			2.0598.03	CuZn25Al5	B 271	C863 00			8.2	480	750	5	115.000	190
	05	1705	2.1052.01	CuSn12	not yet standardized		Cu 84 - 88 Sn 11 - 13 Pb 1 Ni 2.0 Sb 0.2 P 0.2	Cu 85 - 88 Sn 10 - 12 Pb 1 - 1.5 Ni 0.8 - 1.5	8.6	140	260	12	110.000	80	Material with good wear resis- tance. corrosion and seawater resistant international partially standardized
			2.1052.03	CuSn12	not yet standardized				8.6	150	280	8	110.000	90
			2.1052.04	CuSn12	not yet standardized				8.7	140	280	8	110.000	95
	1 ) delivery form: .01 = sand casting. .02 = gravity casting. .03 = centrifugal casting. .04 = continuous casting

Lubrication conditions	Dry	Periodic lubrication
Service temperature range (℃)	-40～+120	-40～+120
allowable max. contact pressure : P (N/mm2)	24.5	49
allowable max. velocity : V (m/s)	0.50	1.00
Allowable max. PV value (N/mm2・m/s)	1.63	2.45

Density	——	g/cm3	6.3
Hardness	JIS K 7202-2	HRM	60-95
Oil impregnation rate	——	vol%	12

I.D.	O.D.	Length
class 7 to 8	class 6 to 7	class 8 to 9

Bronze Bushing 2000 Solid Lubricant Wear Plates 10mm Thickness

Bronze Bushing 2000 Solid Lubricant Wear Plates 10mm Thickness

Bronze Bushing 2000 Solid Lubricant Wear Plates 10mm Thickness

Sliding materials Oilles bushings 2000 Sintered Multi-Layer Bearings With Dispersed Solid Lubricant Plate for additional machining

Feature

Characteristics

Service range

Mechanical properties

Oil Impregnation Method

Machining accuracy (bushing)

Classes here are in JIS standard.

This Oilles 2000 bushing sleeve product demonstrates satisfactory performance at the slide surface roughness of Rz6.3 to 12.5μm.

Oilles 2000 bushing sleeve Size sheet:

(e.g.) I.D. is 35mm, O.D. is 44mm, and length is 50mm.

The dimensional tolerances are the values measured at +25℃.

·By the combination of the highly precise article, clearance of a mating shaft and the bearings become smaller than normal combination. When use under the foreign matter environment ,or operating frequency are high, please contact us.

·The dimensional tolerances are the values measured at +25℃.

Availability

Application

solid lubricant wear plates

10mm thickness wear plates

solid lubricant wearplates

Bronze Bushing 2000 Solid Lubricant Wear Plates 10mm Thickness

Beyond Grease: A Deep Dive into Oilless Bushings & Why Viiplus Leads the Way

Your Partner in Self-Lubricating Bearing Applications

Self-Lubricating Bearing Solutions

Advantages of Self-Lubricating Bearings

What Exactly Are Oilless Bushings? The Science of Self-Lubrication

The Tangible Benefits: Why Make the Switch?

Exploring Viiplus's Portfolio: Finding Your Solution

Why Partner with Viiplus? Expertise Meets Quality

I.D.		O.D.		-0.1 Length L Tolerance -0.3
φd	Tolerance	φD	Tolerance	8	10	12	15	16	19	20	25	30
12	＋0.049 ＋0.038	18	＋0.034 ＋0.023	121808	121810	121812	121815	121816	121819	121820	121825	121830
13	＋0.053 ＋0.042	19	＋0.041 ＋0.028		131910	131912	131915			131920	131925	131930
14	＋0.053 ＋0.042	20	＋0.041 ＋0.028		142010	142012	142015			142020	142025	142030
15	＋0.053 ＋0.042	21	＋0.041 ＋0.028		152110	152112	152115	152116		152120	152125	152130
16	＋0.053 ＋0.042	22	＋0.041 ＋0.028		162210	162212	162215	162216	162219	162220	162225	162230
18	＋0.053 ＋0.042	24	＋0.041 ＋0.028		182410	182412	182415	182416		182420	182425	182430
20	＋0.060 ＋0.047	28	＋0.041 ＋0.028		202810	202812	202815	202816	202819	202820	202825	202830
20	＋0.060 ＋0.047	30	＋0.041 ＋0.028				203015	203016		203020	203025	203030
25	＋0.065 ＋0.052	33	＋0.050 ＋0.034			253312	253315	253316		253320	253325	253330
25	＋0.065 ＋0.052	35	＋0.050 ＋0.034				253515	253516		253520	253525	253530
28	＋0.065 ＋0.052	38	＋0.050 ＋0.034							283820	283825	283830
30	＋0.065 ＋0.052	38	＋0.050 ＋0.034			303812	303815			303820	303825	303830
30	＋0.065 ＋0.052	40	＋0.050 ＋0.034				304015			304020	304025	304030
35	＋0.076 ＋0.060	44	＋0.050 ＋0.034							354420	354425	354430
35	＋0.076 ＋0.060	45	＋0.050 ＋0.034							354520	354525	354530
40	＋0.076 ＋0.060	50	＋0.050 ＋0.034				405015			405020	405025	405030
45	＋0.081 ＋0.065	55	＋0.060 ＋0.041									455530
45	＋0.081 ＋0.065	60	＋0.060 ＋0.041									456030
50	＋0.081 ＋0.065	60	＋0.060 ＋0.041							506020		506030
50	＋0.081 ＋0.065	62	＋0.060 ＋0.041									506230
50	＋0.081 ＋0.065	65	＋0.060 ＋0.041									506530
55	＋0.091 ＋0.072	70	＋0.062 ＋0.043									557030
60	＋0.091 ＋0.072	74	＋0.062 ＋0.043									607430
60	＋0.091 ＋0.072	75	＋0.062 ＋0.043									607530
65	＋0.091 ＋0.072	80	＋0.062 ＋0.043
70	＋0.096 ＋0.077	85	＋0.073 ＋0.051									708530
70	＋0.096 ＋0.077	90	＋0.073 ＋0.051
75	＋0.096 ＋0.077	90	＋0.073 ＋0.051
75	＋0.096 ＋0.077	95	＋0.073 ＋0.051
80	＋0.096 ＋0.077	96	＋0.073 ＋0.051
80	＋0.096 ＋0.077	100	＋0.073 ＋0.051
90	＋0.107 ＋0.085	110	＋0.076 ＋0.054
100	＋0.107 ＋0.085	120	＋0.076 ＋0.054

I.D.		O.D.		Length L Tolerance 0 －0.3
φd	Tolerance	φD	Tolerance	16	20	25	30	40	50	60	80	100	120
12	＋0.011 ＋0.003	18	0 －0.008	121816		121825
16	＋0.011 ＋0.003	22	0 －0.009	162216	162220		162230
20	＋0.013 ＋0.004	28	0 －0.009		202820		202830	202840
25	＋0.013 ＋0.004	33	0 －0.011			253325	253330	253340	253350
30	＋0.013 ＋0.004	38	0 －0.011				303830	303840	303850	303860
35	＋0.016 ＋0.005	44	0 －0.011					354440	354450	354460
40	＋0.016 ＋0.005	50	0 －0.011					405040	405050	405060
50	＋0.016 ＋0.005	62	0 －0.013						506250		506280
60	＋0.019 ＋0.006	74	0 －0.013						607450	607460	607480
70	＋0.019 ＋0.006	85	0 －0.015						708550			7085100
80	＋0.019 ＋0.006	96	0 －0.015						809650		809680		8096120
100	＋0.022 ＋0.007	120	0 －0.015						10012050			100120100	100120120

Feature	Oilless / Self-Lubricating Bushings	Traditionally Lubricated Bearings (e.g., Greased Bronze)
Lubrication	Internal / Self-Contained	Requires External Grease/Oil Application
Maintenance	Minimal to None (Maintenance-Free)	Regular Re-lubrication Schedule Required
Contamination	Low Risk (No external grease traps dirt)	High Risk (Grease attracts and holds contaminants)
Operating Temp.	Wider Range (Specific material dependent)	Often Limited by Grease/Oil Properties
Cleanliness	High (No leakage)	Potential for Grease/Oil Leakage
Design	Simpler (No grease nipples/pathways)	More Complex (Requires lubrication access)
Initial Cost	Potentially Higher	Potentially Lower
Total Cost (TCO)	Often Lower (Reduced maintenance, downtime)	Can be Higher (Lubricant, labor, downtime costs)

Bearing Type	Load Capacity	Speed Capability	Temp. Resistance	Dry Run Ability	Typical Application Areas
JDB (Graphite Plugged)	Very High	Low	Very High	Excellent	Heavy Industry, Molds, High Temp Equipment
SF-1 (PTFE Composite)	High	Moderate	Moderate	Excellent	Automotive, Hydraulics, General Machinery
JF (Bimetal)	High	Moderate	Moderate	Limited	Engines, Transmissions, Construction Equip.
FB (Wrapped Bronze)	Moderate	Moderate	Moderate	Poor (Needs Lube)	General Purpose, Linkages, Pivot Points


*From:	Your email address is incorrect!
*To:	JIAXING VIIPLUS INTERNATIO NAL CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!