Flat Vulcanizing Machine Rubber Vulcanizing Machine Heat Press Machine

Download Brief:

ZL-3022 Laboratory Hydraulic Press Tester; Lab Ho...

A vulcanizing machine is a type of machine that vulcanizes various rubber and plastic products, with functions such as timed mold locking, automatic pressure filling, automatic temperature control, automatic timing, and alarm upon arrival. The vulcanization machine is divided into three forms: electric heating, steam heating, and thermal oil heating. Also known as flat vulcanizing press, foam plate vulcanizing press, rubber vulcanizing press.

suppress; The rubber vulcanization process requires functions such as pre heating, automatic venting after loading, pressure holding vulcanization, timing alarm, automatic mold opening, and product demolding. Generally, PLC control is used, with automatic and manual operations (customized according to user needs), which can record the required process flow, remote operation, and system management.

The surface temperature of the hot plate is uniform, the temperature control is precise, the temperature controller can accurately record temperature data, the pressure is stable and reliable, and the operation is safe and convenient. The early debugging time for mid to high end machine mass production is relatively short, and the reliability of the equipment is very high. 99% of the equipment on the market is manufactured on the premise of ensuring product quality, providing production efficiency, and achieving significant economic benefits.

1. Before the experiment, check if the required scale is reached in the oil tank, and then turn on the machine to check if all components are working properly and if the pillars (frame plates) are lubricated.
2. Pay attention to the temperature of the hot plate during preheating. If it does not meet the requirements, it must be adjusted under the guidance of the instructor, and unauthorized movement is strictly prohibited.
3. When placing the mold between the hot plates, it should be prevented from scalding or crushing accidents, and the mold should not be placed when the hot plate is rising.
4. After the mold is loaded, it should be placed in the middle of the flat plate, and people should stand in the center of the operating platform. When the required pressure is reached after mold closing, turn off the motor. If it fails to meet the requirements, please ask the instructor to adjust it and do not move it without permission.
5. Use an iron hook when taking the mold to prevent hand injuries from being crushed. When encountering products sticking to the mold during mold opening, be careful when tapping the mold opening tool to prevent the mold from falling to the ground or injuring your feet.
6. If the machine malfunctions, the power must be immediately cut off and reported to the teacher. Unauthorized disassembly of various components is strictly prohibited. Crushing the mold is strictly prohibited, and unauthorized handling is strictly prohibited.
7. After the experiment, cut off the power, clean the room, and fill in the usage record after being checked by the instructor.