Revolutionize Your Plant Growth with PGLE-N: Advanced Lighting Solutions for Maximum Efficiency and Control

PGLE-N Product Overview
The compact combination packaging design greatly saves space and reduces transportation costs.
Tool-free disassembly and assembly, the light strip adopts a unique pin design, high safety, supports hot swapping, convenient replacement, zero maintenance cost.
Unique waterproof rubber pad, waterproof, moisture-proof, and dust-proof, specially made of aviation aluminum material, high purity, good heat dissipation performance. It uses professional low-temperature light sources suitable for the spectrum of plants plants.
Uses 0-10V multi-dimming power supply.

PGLE-N Unique Selling Points
1. Program control is more precise than other products, dimming from 0-100% under full load power, real-time power fluctuation can be controlled within only 3% (within 10W or even 5W).
2. The matching dimming line is compatible with controllers available on the market, giving customers more choices.
3. Touch screen switch, dimming, power adjustment are simple and convenient, and the corresponding power value can be clearly seen when the brightness of the luminaire changes.
4. Good heat dissipation effect, the temperature of the power supply is about 20% lower than that of power supplies on the market, which can better protect the lifespan of the luminaire.
5. Long lifespan of the power supply. It can reach 50,000 hours of continuous use, with a failure rate not exceeding 5%.
6. Digital dimming of the controller gives a signal command to keep the power of each lamp consistent. This ensures that each lamp has the same voltage and power when installed in series, making it ideal for large-scale planting projects and saving planting costs.
7. One controller can control 260 lamps, which is more conducive to large-scale planting projects, saving on planting costs.
8. The advantage of detachable light bars allows for different spectra by replacing the light bars. Customers can freely switch the spectrum of the luminaires according to their needs, and when the light bars need to be replaced with a new spectrum, they can reuse the power supply, only needing to purchase the light bars, saving the customer's stocking costs.
9. The addition of red and far-red light in the light bar mainly promotes plant growth.
10. Waterproof structure with built-in power supply. The product installation is more concise and aesthetically pleasing, and the detachable light bar installation is more convenient.
11. Customizable frame color according to customer requirements, meeting the customer's need for coordination with indoor decor after installation.
12. High cooperation between the light bar and power supply suppliers, short material stocking period, and fast delivery of finished products.

PGLE-N Built-in Power Supply Version Plant Lamp Solves Several Industry Pain Points
1. Power display solves the problem of being unable to detect the power of each lamp in multiple batch plantings. The built-in AI chip combined with software algorithms can correct the actual power to ensure that the deviation of the luminaire power is within ±5W. Through long-term use, the product power can be further corrected to a maximum of ±1W. The longer the use, the more accurate the power, and it can be monitored. Currently, many products on the market do not know if the power of each lamp is consistent when multiple lamps are connected. Theoretically, by connecting lamps with consistent power through dimming signals, dozens or even hundreds of lamps can be controlled under one controller.
2. The luminaire control adopts an external control priority design, where external dimming lines take precedence when controlled, rendering touch settings ineffective.
3. Touch dimming solves the waterproof problem in the controller area. Products on the market cannot achieve a true IP65 waterproof level through knob dimming.
4. The built-in power supply design conducts heat from the entire frame power to the glue. Due to the large heat dissipation area, the power supply temperature is about 20° lower than that of power supplies on the market. For every 10° decrease in temperature, the lifespan of the power supply doubles. The power supply lifespan theoretically triples that of power supplies on the market.
5. The DC end connector to the light board uses a rubber ring for waterproofing and employs a double-pin with one polarity to avoid overheating and burning out the connector due to high current. If one fails, the other pin can fully meet the current passing through the product. Additionally, each light bar has a ground socket, with all 8 light bars grounded through connectors, ensuring product electrical safety. Many products on the market easily loosen connector screws after a period of use, causing sparks and burning out the connector, making it irreparable.
6. The DC end port of each light bar comes directly from the power port, without complicated wiring. Combined with our tool-free sliding light bar installation, it is very quick to replace light bars, allowing for multiple spectrum changes to meet different planting spectrum needs.
7. Many plant users grow multiple varieties of products, and customers can use different spectra for different plant lighting needs by replacing different spectrum light bars.
8. The replaceable light bar function provides users with more spectrum choices, and in the face of complex planting needs, users can operate this product line at a lower cost.

Baylabs foucs on horticultural lighting industry
Baylabs team with over 10 years experience in horticultural lighting which focus on offer solutions for plants cultivation, commercial greenhouse, vertical farming and food cultivation

150+ staff including 20+ RD engineers

The company always insist original design. we have our own design team with innovative concepts to make our grow lights always unique in market. Technical innovation has always been the core part of our value. Now we have overall 150+ people in this Baylabs family, with 20+ R&D engineers of combining in plant science, hardware development, system integration, control software development, etc.

8000sqm factory and 4 production & assembly lines

With 8000sqm industry-leading factory and 4 production & assembly lines, our monthly output of LED grow lights is up to 8000-10000 units of all models combined.

OEM ODM 10 Years Experience

With a strong product research and development capability and 10 years experience in horticultural lighting industry, we understand that plant science is far more complicated than conventional home or commercial lighting. Therefore we also offer OEM and ODM service for customer who require specific products for their research or commercial growing applications. From product hardware structure to spectrum configuration, and control system, we offer the leading customization service in a manner of developing products with customer together.

Open team make it possible
Baylabs is open team. We like to discuss with growers on everything about growth, also we'd like to share our thoughts on lights and we're sure we can help growers grow better yields. we understand what growers really need for lighting.