Seamless Butt Welding Alloy Fittings Target Tee 6"X SCH-60S Titanium Gr2 Pipe Fittings

Seamless Butt Welding Alloy Fittings Target Tee 6"X SCH-60S Titanium Gr.2 Pipe Fittings

Introduction

Target/Cushion Tee are manufactured from forged material. Their main characteristic is a blind branch.
Through the analysis of the way in which the corrosion has an effect on the surface of the Target/Cushion Tee blind branch, the level of corrosion of the piping material can be measured.
In case Target/Cushion Tee are manufactured from forged material, it is possible to manufacture dimensions and forms according to customers' requests.

Overview and features:Hastelloy C22

Titanium alloy has high strength and low density, good mechanical properties, good toughness and corrosion resistance. In addition, titanium alloys have poor processing properties and are difficult to cut. In hot working, it is very easy to absorb impurities such as hydrogen, oxygen, nitrogen and carbon. There is also poor wear resistance and complex production process. The industrial production of titanium began in 1948. The development of the aviation industry requires the titanium industry to grow at an average annual rate of about 8%.

Cutting characteristics

When the hardness of titanium alloy is greater than HB350, cutting is particularly difficult, and when it is less than HB300, it is prone to tool sticking and difficult to cut. However, the hardness of titanium alloys is only one aspect that is difficult to machine, and the key lies in the comprehensive impact of the chemical, physical, and mechanical properties of titanium alloys on their machinability. Titanium alloy has the following cutting characteristics:

(1) Low deformation coefficient: This is a significant feature of titanium alloy cutting, with a deformation coefficient less than or close to 1. The distance of chip sliding friction on the rake face is greatly increased, accelerating tool wear.

(2) High cutting temperature: Due to the small thermal conductivity of titanium alloy (only equivalent to 1/5-1/7 of 45 # steel), the contact length between the chip and the front cutting surface is extremely short, and the heat generated during cutting is not easily transmitted, concentrated in a small range near the cutting area and cutting edge, resulting in high cutting temperature. Under the same cutting conditions, the cutting temperature can be more than twice that of cutting 45 steel.

Q1: Are you trading company or manufacturer ?

A: We are factory.

Q2: How long is the delivery ?

A: 15-30 working days

Q3: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.

.

If any questions,you can call me mobile phone at any times:0086-15710108231

TOBO GROUP sales head offce in Shanghai.

We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicians.

We have five branch factories which can supply the best quality pipes, tubes, fittings flanges and related accessories. Now, it owns a number of advanced pipe production equipments, metal, forging, machining, cold forming, hot extrusion, such as heat treatment process, producing 60, 000 tons of pipe fittings. Company with a variety of detection devices, such as nondestructive testing, chemical analysis, metallographic examination, physical experiments. The technical is very strength, our main products contain fittingsforged socket welding fittings and threaded fittings, pipe weld and the materials of the products contain stainless steel ,duplex-stainless steel alloy steel.

In addition, we are authorized by more than 120 top-class mills from South Korea,Japan and China like JFE,SUMITOMO,POSCO,BAOSTEEL, TISCO,LISCO,.TPCO,HENGYANG VALIN and so on .

Our main products as follows:

• Stainless steel pipe & tube

(seamless pipe / welded pipe / square pipe / rectangular tube,duplex stainless / inconel tube)

• Carbon / alloy steel pipe & tube

(seamless pipe / ERW / SSAW / LSAW / UOE / hollow section pipe / Galvanized Pipe)

• Tubing and casting

(line pipe,water pipeline,gas pipeline,oil pipeline)

• Special steel tube

(copper tube/titanium tube/aluminium tube/nickel alloy )

• steel bar

(round bar/angle steel /flat steel/channel steel/steel wire)

• Pipe Fittings

(eblows, equal / reducing tees, concentric/eccentric reducers, caps, crosses, bends, dish end/end cup, stub ends, unions, couplings / hex couplings, swage nipples , nipples, hex. plug, sockolet, weldolet, thredolet, etc)

• Flange

(DIN flange/ AISI flange/blind flange/welding flange/stainless flange/slip on flange)

• steel sheet / coil

(stainless steel/carbon steel/alloy steel/galvanized steel/aluminium )

• Valve

(ball valve/gate valve/butterfly valve/globe valve/swing check valve/ check valve)

In order to comply with the global modernization services development trends and eliminating the varieties distress of the global enterprise‘s purchase in the consumables.. We coordinate the pressure pipe manufacturer which with the scale of production,quality control and high cost performance (has passed ISO 9001 quality series attestation, ccs, DNV,PED/97/23/EC,AD2000-WO,special equipment manufacturing license,ASME-SA182.through a variety of effective assort mechanism to make up the shortage of supply and Post-processing of VAT enterprise, and to supply high quality pipe fittings, because of the superior quality and good service, we have established long term business cooperation with more than 60 countries and areas,which covers Europe, Africa, South America, North America, Middle East, Taiwan and South East Asia and so on.

With many years effort and support from our valuable customers, these products have obtained a big market share in the world.

Our business principle is "Superior quality, Competitive price, Timely delivery and Considerate service " Standing to the principle of “Enterprises focus on the core business”, TOBO will actively promotes the globalization of business strategy approach, using advanced supply chain management technology to service for clients with higher quality and more competitiveness ‘ s products. At the same time, we sincerely reply your inquiry, honesty waiting for your visiting and wish to have cooperation with you at the any time. We welcome all the customers to contact us for more information. We assure you, with our technical knowledge and experience, our company will be one of your Stable, Continuate business parters in China.

info@tobo-group.com