Product Details
Company Profile

X20SO6300 B&R X20 PLC SYSTEM I/O Module 6 Safe Digital Outputs With 0.2 A

MATERIAL NUMBER:

X20SO6300

DESCRIPTION:

6 safe digital outputs with 0.2 A
Source circuit
Output type B
Integrated output protection

This module is equipped with 6 safe digital outputs. The nominal output current is 0.2 A.

The module can be used for controlling actuators in safety-related applications up to PL e or SIL 3.

The outputs are designed using semiconductor technology so that the safety-related characteristics do not depend on the number of operating cycles. The "high-side high-side" variant (output type B) is required for actuators with reference potential (e.g. Enable inputs on frequency inverters). It is important to observe the special notices for the cabling in this case. Safe digital output channels provide protection against automatic restart when network errors occur.

This module is designed for X20 12-pin terminal blocks.

Short description

I/O module	6 safe type B1 digital outputs, 24 VDC, 0.2 A, OSSD <10 µs

General information

B&R ID code	0xB815
System requirements
Automation Studio	3.0.81.15 or later
Automation Runtime	3.00 or later
SafeDESIGNER	2.70 or later
Safety Release	1.2 or later
mapp Technology Package	mapp Safety 5.7.0 or later
Status indicators	I/O function per channel, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software
Blackout mode
Scope	Module
Function	Module functionality
Standalone mode	No
Max. I/O cycle time	1 ms
Power consumption
Bus	0.32 W
Internal I/O	1.4 W
Additional power dissipation caused by actuators (resistive) [W]	1.128
Electrical isolation
Channel - Bus	Yes
Channel - Channel	No
Certifications
CE	Yes
Functional safety	cULus FSPC E361559 Energy and industrial systems Certified for functional safety ANSI UL 1998:2013
Functional safety	IEC 61508:2010, SIL 3 EN 62061:2013, SIL 3 EN ISO 13849-1:2015, Cat. 4 / PL e IEC 61511:2004, SIL 3
Functional safety	EN 50156-1:2004
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	In preparation
EAC	Yes
KC	Yes

Safety characteristics

EN ISO 13849-1:2015
Category	Cat. 3 if parameter "Disable OSSD = Yes - Warning", Cat. 4 if parameter "Disable OSSD = No"
PL	PL d if parameter "Disable OSSD = Yes - Warning", PL e if parameter "Disable OSSD = No"
DC	>60% if parameter "Disable OSSD = Yes - Warning", >94% if parameter "Disable OSSD = No"
MTTFD	2500 years
Mission time	Max. 20 years
IEC 61508:2010, IEC 61511:2004, EN 62061:2013
SIL CL	SIL 2 if parameter "Disable OSSD = Yes - Warning", SIL 3 if parameter "Disable OSSD = No"
SFF	>60% if parameter "Disable OSSD = Yes - Warning", >90% if parameter "Disable OSSD = No"
PFH / PFHd
Per channel	<1*10-10
openSAFETY wired	Negligible
openSAFETY wireless	<110-14 Number of openSAFETY packets per hour
PFD	<2*10-5
Proof test interval (PT)	20 years

I/O power supply

Nominal voltage	24 VDC
Voltage range	24 VDC -15% / +20%
Integrated protection	Reverse polarity protection

Safe digital outputs

Quantity	6
Variant	FET, 2x positive switching, type B1, output level readable
Nominal voltage	24 VDC
Nominal output current	0.2 A
Total nominal current	1.2 A
Output protection	See section "Inrush current behavior for output channels".
Braking voltage when switching off inductive loads	Max. 45 VDC
Error detection time	1 s
Insulation voltage between channel and bus	500 Veff
Peak short-circuit current	See section "Inrush current behavior for output channels".
Leakage current when the output is switched off	<100 µA
RDS(on)	4.7 Ω
Switching voltage	I/O power supply minus voltage drop due to RDS(on)
Max. switching frequency	See section "Inrush current behavior for output channels".
Test pulse length	Max. 10 µs
Max. capacitive load	100 nF

Current on loss of ground

IOUT	<100 µA
IGND	<70 mA

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level	0 to 2000 m, no limitation
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	0 to 60°C
Vertical mounting orientation	0 to 50°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x safety-keyed terminal block separately. Order 1x safety-keyed bus module separately.
Pitch	25+0.2mm

Product Tags:


*From:	Your email address is incorrect!
*To:	Joyoung International Trading Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	B&R Automation Plc
Brand Name:	B&R
Model Number:	X20SO6300
Certification:	COC
Place of Origin:	Austria
MOQ:	1EA
Price:	USD
Payment Terms:	T/T
Supply Ability:	10EA
Delivery Time:	3-5 DAYS
Product Name:	B&R
Product Model:	X20SO6300
Product Type:	I/O module
Internal I/O:	1.4 W
Voltage range:	24 VDC -15% / +20%
Warranty:	1 Year