Huawei Mpwd Power Board AC 220V Module Embedded Olt Ma5608t

H801MPWD-AC power board


The H801MPWD board is an AC power board, consisting of an AC power unit and a monitoring unit. The board supplies power to the device and supports the lead-acid battery for power backup. The AC power unit provides overcurrent protection, output overvoltage protection, short circuit protection, and over-temperature protection. The monitoring unit provides comprehensive management for the power system and storage battery, and also provides certain environment monitoring functions.

Overview

The H801MPWD board supports the following functions and specifications:

• Input AC voltage: -100 V to -240 V
• Input AC frequency: 50 Hz to 60 Hz
• Single-phase three-wire AC power input
• Battery port, a 3V3 terminal socket, supporting DC input power
• Lead-acid battery input, reverse polarity protection, and fuse protection
• Output DC power voltage: -48 V (adjustable from -42 V to -57.6 V)
• Rated output power: 400 W
• Alarm monitoring
• Enabling and disabling of the rectifier module; equalized and float charging for the rectifier module
• Battery low voltage disconnection; charge and discharge management of storage batteries

Working Principle

Figure 1 illustrates the working principle of the H801MPWD board.
Figure 1 Working principle of the H801MPWD board
The basic working principle of the H801MPWD board is as follows:

• AC input power is supplied to the board. After AC/DC conversion, the power is supplied to the system backplane at -48 V (adjustable).
• The board supports battery input. The monitoring unit manages the charging and discharging of batteries.
• The board communicates with the system through the backplane, reporting board hardware and electronic label information to the backplane.
• The board supports communication with the monitoring unit through the 485 protocol to adjust voltage and current and report alarm information.
• The board supplies 3.3 V power from the system to the monitoring unit.
• The monitoring unit manages lead-acid batteries.
• The optical coupler implements the battery low voltage disconnection function.
• The board provides power distribution checking and alarm reporting functions.

Panel Description

Table 1 describes the front panel of the H801MPWD board.
Table 1 Front panel of the H801MPWD board

Ports

The ports of the H801MPWD board are located on its front panel. Table 2 describes the ports of the H801MPWD board.

Specifications

Table 3 lists the specifications of the H801MPWD board.
Table 3 Specifications of the H801MPWD board

Realated products