LGJ-18T Lab Scale Freeze Dryer Manifold 80C AC220V Multi Manifold Pipe

LGJ-18T Lab Use Manifold Top Press Vaccum Freeze Dryer Machine

LGJ-10/12/18 Vacuum freeze dryers, have below types:

Types:A:standard type,B:top press type,C:manifold type,D:manifold with top press type,E:T-type,T:T-type

A Standard:

It is suitable for freeze-drying bulk (liquid, pasty, solid) conventional materials.

B Top-press:

It is not only suitable for freeze-drying of bulk (liquid, pasty, solid) conventional substances, but also suitable for drying of Vials materials. When preparing for freeze-drying, the materials are separated into Vials according to the need. After floating the cap, the freeze-drying process start. After drying, the capping device is operated to tighten the cap, which can avoid secondary pollution, re-adsorb water, and is easy to store for a long time.

C Multi manifold general type:

It is suitable for the freeze-drying of bulk (liquid, pasty, solid) conventional materials, and can be fitted with flasks outside the drying chamber to dry the materials rotated inside the bottle wall. At this time, the flask is connected to the manifold outside the drying chamber as a container. The material in the flask is heated at room temperature. Through the multi-manifold switch device, the flask can be removed or loaded at any time as needed without stopping the machine.

D Multi manifold cover type:

On the basis of the characteristics of the common type, it combines the characteristics of the capping type and the common type of multi-manifold pipe. It is suitable for freeze-drying of bulk (liquid, pasty, solid) conventional material; suitable for drying of vials materials.

When preparing for freeze-drying, the materials are separated into vials according to the need. After floating the cap, the freeze-drying process start. After drying. the capping device is operated to tighten the cap, which can avoid secondary pollution, re-adsorb water, and is easy to be stored for a long time. The flask is used to dry the material whirled inside the flask. At this time, the flask is connected to the manifold outside the drying chamber as a container. The material in the flask is heated at room temperature. Through the multi-manifold switch device, the flask can be removed or loaded at any time as needed without stopping the machine.

E T shelf:

It is suitable for the preservation of microorganisms such as bacteria and fungi in ampoule tubes. The ampoule storage method is often used in laboratories. The samples were packaged in small ampoules after freeze-drying. It has the advantages of Long-term preservation, small variation, easy storage and widely used.

Advantages:

Small amount of samples can pre-freeze in condenser.They are suitable for lab use or small-scale production,and
they can meet requirements for most laboratories.

Features:

■All-in-one structure,small size,no external flange,easy to use,no leakage.
■The cold trap and console are made of stainless steel,which is anti-comrosion and easy to clean.
■All materials in contact with the product use inert materials to meet the requirements of the GLP.
■All stainless steel inflated/water release valve is designed and produced by our Bonnin company,which is safety,anti-corrosion,no leakage.
■ With sample pre-frozen function,large cold trap opening,no inner coil,and low temperature refrigerator is needless.
■ Patented gas diversion technology,and strong ice holding ability.
■ World-known brand compressors,high efficiency,long life,low noise.
■ Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum.
■ Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life.
■ Professionally designed FD-LAB freeze-drying machine control system+SH-HPSC-I modular controller with high reliability and stability.
■ Intelligent data recording system can real-time record and display the cold trap temperature curve,sample temperature curve,vacuum curve.
■ Cold trap electric heating defrosting function.

FAQ 1. Are you a factory or trading company?

We are a factory.

FAQ 2. Can you supply OEM?

OEM is available.

FAQ 3. What's the MOQ ?

(1). MOQ is 1 piece. The disposable supplies order usually at least 1 box.

FAQ 4. How about the order processing and lead time?

After order confirmation and receive the advance payment, we will prepare the machines and goods. Usually could ready within 10 working day, when dispatch, will inform client and send the documents for client making import customs clearance.

FAQ 5. What quality will be ensured?

100% new and quality inspection before delivery from factory.

Stable export box for good package.

FAQ 6. Can you guide the working?

The machine will deliver with English display, English manual and video for installation and operation.

FAQ 7. How can your engineer replace parts if they are not beside the machine?

Bonnin’s engineer could provide the solutions by email and video. In warranty period, we can send spare parts for free and life-time technical support for spare supply.

Bonnin Instrument Technology Ltd (also named of Wuhan Bonnin Technology Ltd). is an ISO9001 certified company since 2005, manufacturing physical property testing instruments for pulp, paper, packaging, textile, fabrics, nonwoven, and plastic, rubber, ink industries, etc. Also have scientific instruments, pharmaceutical water analyzer, life science, incubator, spectrometer and others.

Bonnin's Instruments are used in more than 10,000 testing laboratories, quality control departments, commodities inspection and scientific research institutes and universities throughout China.

Bonnin professional team is seeking to the highest quality, competitive price and fastest delivery of the equipments, for 100% customer satisfaction.

Bonnin team also are looking for overseas partnership, to distribute our equipments widely!