2.4G 5.8G Gigabit Ethernet Port 1200Mbps Mesh Wifi Router

Wire Interface

Power Interface

1*Power Interface, The router is powered by an external power adapter. The external power adapter should:

1. Meet the EMC requirements of YD/T 983 and pass CCC certification;

2. Input voltage: 198-242V ~ 50Hz;

3. Output voltage DC: 12V ± 5%, ripple range ± 200mV, output current: 1A;

4. The MTBF time of the power supply is: greater than 30,000 hours;

5. The power supply interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface with a DC head diameter of 2.1 mm;

6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring;

7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ.

8, should have lightning protection against surge test, lightning protection level of at least 1.5KV.

Wireless Interface

Wi-Fi Networking

802.11b/g/n/ a/ac,2.4GHz/5GHz,Wireless rate 1167Mbps；

2* Internal 3dBi Omnidirectional dual frequency antenna.

The Current wifi Device quantity can highly reach to 40

Long green light: good connection quality

Long yellow: the connection quality is normal

Red long light: connection failed