Full Sets Tire Retreading Machine Automatic Polishing Machine MTD-09

Full Sets Tire Retreading Machine Polishing Machine For Truck Tyre

First—Select tyres

Selected the suitable tyres from the waste tyres for retreading.

Manual work

Using tyre checking machine

Second—Buffing tyres

After selected, using tyre buffing machine grind the tyres, buffing to the distance from rubber line only 3-2mm, it can automatic control the distance.

Please note there is no stones and other sundry on the tyre.

Third—Repair tyre crown(the tyre tread after buffing)

Repair the tyre on the tyre repair stand, using repair tools clean the holes, rubdown the thread residue of TBR, processing the steel wire of wire bead.

Fourth—Tyre cavity repair

Using tyre checking machine, expend the tyre cavity, repair the holes, different sizes holes use different strengthening layers.

Fifth—Brush coating

After repairing, brush the glue (cushion rubber and 120#gasoline mixer), dry it in the air about 30mins.

Sixth—Extrude rubber strips

The tyres was sharped in the high speed way, after the above repairing, there will be a few mm sag, which need to fill in some rubber strip. If not, the empty parts will foam concrete pavement when the tyre in the high speed running.

Seventh—Stick the middle rubber

After extruded the rubber strips, stick the middle rubber, to ensure curing the buffing tread and rubber tread rubber.

Eighth—Stick tyre tread

When finished the above process, stick one layer tread rubber, it is the main material for tyre retreading. Select the best quality tread rubber, make a high quality renew tyre.

Ninth—Install the envelop

Using envelop spreader machine install the envelops. It will create a good physical condition for tyre curing, inflate the envelops to keep a balance pressure.

Tenth—Install inner tube, flap and rim

The rim can support the inner tube, when the chamber pressure and inner tube extrusion pressure.

Eleventh—Put tyres on the multi-function tyre frame

Put the packed tyres on the frame, then put them into curing chamber.

Twelfth—Curing

Mould curing machine with half-part mold, segment mold or cone mold

Thirteenth—Final inspection

After vulcanizing the tyres, using the high pressure inspection machine test the tyres strictly.

Taizhou Mingtong Machinery Company limited is a professional manufacturer engaged in the research, development, production, and marketing of environmental protection machine. Located at Shangsan high-speed Yangtou exit, nearby the beautiful Tiantai Mountain where the Tiantai Section of Buddhism and the South Section of Taoism were founded, convenient transportation and superior location.

Our company has a reasonable knowledge structure, highly specialized technical team. It is a leading manufacturer in China in processing scrap tires. In the recent years, with the ever developing market economy and strengthening comprehensive ability, our company has made some appreciable achievements in the scale of production operation, the grade of product technology and the increase scope of market distribution.

In order to meet the different demands of customers, we supply various and complete type of equipment, optimize the equipment by professionals according to the special requirement of customers. Provide the most reasonable equipment program, and provide related technical training and quality service.