Product Details
Company Profile

ECM Electric Motor Testing System , Low Noise DC Brushless Motor Test Bench

ECM Electric Motor Testing System , Low Noise DC Brushless Motor Test Bench

Name:ECM Brushless DC Motor Test Bench

Model:CMT-1040ECM-HA

Product introduction:

CMT-1040ECM-HA is a set of AC brushless DC motor designed for long-term AC motor production line test, the test process can automatically collect data, test data can be automatically stored, and can meet the automatic test, fixed-point test, manual test, Rated temperature rise, overload test, and print out reports. The entire test system is measured by a third-party authority and has a CNAS calibration certificate.

Features

1. The equipment used (signal line) requires anti-interference or shielded wire, the equipment is well grounded, safe and reliable, equipped with grating protection, the test bench is equipped with an emergency stop button, the motor still has to follow the specified Termination of test after power sequence and completion of discharge process

2. The motor test bench has internal protection function and will not damage the test bench due to the damage of the motor. For example, when the motor windings are short-circuited, the test will not damage the test table.

3. All test items can be set shielding items, can be selected on the test bench

4. The system can test the performance parameters of the following motors

5. The load size can be adjusted linearly, and it can be tested in two ways: fixed speed or constant torque.

6. No-load and load can be converted, the test specification is set by the industrial computer LABVIEW program, and automatically determine, sound and light alarm, data storage and network output

Selection reference

Customer can refer to the following dynamometer controller model according to own needs for system selection. The software and structure can be tailored to the customer's actual application.

Controller model	Sampling speed	Available Communication Protocol	Communication Method	Providing Test Software	Features
HDC-1010	5-10PCS/S	Yes	RS-232	no	Simple operation, low price, suitable for ordinary production lines
HDC-1010-S	5-10PCS/S	Yes	RS-232	Yes
HDC-1020	20PCS/S	no	USB2.0	Yes	Fast collection speed and wide test range, suitable for common production lines and common experiments
HDC-1030	25PCS/S	no	USB2.0	Yes
HDC-1040	100PCS/S	no	GPIB/RS232	Yes	Fast acquisition speed, wide test range and strong anti-interference performance, suitable for production lines and laboratories with high requirements
HDC-2010	100PCS/S	no	GPIB/RS232	Yes

Software introduction

Configuration

No.	Component	Model	Technical requirements
1	Industrial control computer	IPC-610	Chassis; IPC-610; Motherboard: AIMB-781QG2; CPU: I5-24003.1G; Memory 4G; Philips 190V LCD Monitor. Windows 7 genuine system;
2	Program-controlled variable frequency power supply	AFC-31020C	Equipment control power supply: single phase 1PHASE / 220VAC / 50HZ input; software can set voltage and frequency, sine wave 50, 60HZ, harmonic distortion rate of less than 5%; load power input protection: short circuit protection, overload protection.
3	Electrical parameter tester	WT310E	Communication port is IEEE-488; Current transformer 50A adopts Yokogawa original; External input (optional): 2.5/5/10V or 50/100/200 mV; Frequency range DC, 0.5Hz to 100kHz
4	Dynamometer	BHD-144	Torque 0.8 ~ 14N.m, precision ± 0.5% FS; speed 100 ~ 12000rpm, accuracy ± 0.1% FS. Continuous operation of rated power 3000W; 3500W running for 5min. With correction balance bar, weight
5	Load controller	HDC-1040	It adopts the US imported data acquisition chip and the latest DSP digital signal processing technology to cooperate with the dynamometer, communicates through the GPIB interface, has fast transmission speed and good stability, and acquires 120 torque and speed points per second.
6	Cabinet	customized	L600W600H1015 cabinet and alarm accessories, with floor casters and locking.
7	testing platform	customized	With safety device
8	Clamp	HDJ-200	Make sure to adjust up and down and lock function.
9	testing software	customized	Chinese interface; with parameter setting and over-limit alarm function, fixed speed load test, start-up time test, no-load test.
10	Tachometer	RM1501	Automatic shift, range from 10.0 to 99999 RPM, measurement distance 50 to 300mm, non-contact speed measurement, RS-232 communication.

Product Tags:


*From:	Your email address is incorrect!
*To:	KingPo Technology Development Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Electric Motor Testing System
Brand Name:	KingPo
Model Number:	CMT-1040ECM-HA
Certification:	Calibration certificate
Place of Origin:	China
MOQ:	1
Payment Terms:	T/T
Supply Ability:	20 per month
Packaging Details:	satety plastic tool box or plywood package
Motor speed:	0～6000rpm
Input voltage:	0～600VAC Automatic switching
Input Current:	20A 50A
input power:	U X I X cosΦ
Output Power:	0～3000W
Output torque:	0～14N.m