Expert 3G 2100MHz Detecting Versatile RF Signal Detector With Digital Signal Amplifier

Expert 3G2100MHz Detecting Versatile RF Signal Detector with Digital Signal Amplifier

Description:

The VS-066NG has a wide universal frequency range with a digital signal amplifier for enhanced detection. It can detect wired cameras with professional 3G detection function, support for silent detection, and distinguish between signal categories (via LED lights and BEEP sound). With noise reduction, low battery reminder. The price is relatively economical, the coverage is wide, and the basic functions are common. It has sensitivity adjustment, noise elimination, and can effectively distinguish whether the signal is a wireless camera or a hidden microphone (hidden microphone) or a cellular phone. When you need to use analog digital signals, select AD. There is a detection function specifically for wired cameras. There is also a mute test, low power reminder function.

Featured Function:

1. Versatile& Wide Frequency Range

This device can detect most of GSM phone, 3G / 4G smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.

2. DIGITAL SIGNAL AMPLIFIER

The unique Digital signal amplifier provides stronger indication for digital signals of Bluetooth, WiFi, cell phone and Digital spread spectrum device for easier identification.

1) This device has an individual 3G 2100 detector inside. Set the N-3G switch (located in left side of front view, N = Normal, 3G = 3G 2100) to 3G, this device will enter 3G 2100 detection.

2) The sensitivity of 3G 2100 detector is very high. If the signal strength LEDs light up, and beep or vibration also go off, set the sensitivity tuner to – (minus) until the first green LED slight light up.

3) In this detection mode, this device is major in 3G 2100 detection. But this device will also detect other radio signal if it is very strong.

4) Set the N-3G switch to N, this device returns to normal detection mode.

1) Set the power switch to bottom Vibrate mode which will alert you when you do not hold this device in hand to scan an environment.

2) Earphone output: User can detect by earphone hearing without others’ awareness.

6.Distinguish The Signal Type

This device can help user to distinguish the signal type by indication of LED and beep.

1. LED light up and Beep continuous: Wireless bug, Video wireless camera, 2-way radio and 3G / 4G smartphone, etc.
2. LED blink and Beep Intermittent: WiFi, IP camera, Digital wireless camera and GSM phone, etc.

7. Sensitivity Adjustment

Turn the Sensitivity Tuner to - (minus) side to decrease the sensitivity and the detecting distance will be shorter. Turn the Sensitivity Tuner to + (plus) side to increases the sensitivity and the detecting distance will be longer.

8. Interference(Background Noise)Elimination

1. The Sensitivity tuner is also used to eliminate the background noise (interference). If the scan environment has other noises that interfere with your detector, the strength indication LED will light up.
2. If this condition appears, adjust the sensitivity by turning the Sensitivity Tuner to - (minus) side to decrease the sensitivity until the first green LED slightly lights up. In normal condition, when turn on the power, only the Power LED goes Blue to confirm this device is in normal condition.

9. Low Battery Warning

When this device is switched on, “Bat. Low” LED in the left bottom of front side goes Red, it means the batteries run down. Please replace new batteries

How To Operate

1. Slide and remove the battery lid, install two AAA/UM-4 batteries matching correct (+) and (-) poles as indicated, then slide the battery lid back.
2. Pull out the antenna. Turn on this device by setting the switch in left side of front view to upper side (beep). If set the switch to bottom side, it is vibration mode. The power LED (Blue) will be lit up to confirm this device is operation correctly.
3. First set up the sensitivity benchmark before your scan job. Turn the Sensitivity Tuner to + (plus) side until the first green LED light up, then turn the Sensitivity Tuner to - (minus) side to decrease the sensitivity until the first green LED put out.
4. When switch on this device and the strength LEDs light up, it means the detecting benchmark too sensitive. Turn the Sensitivity Tuner to - (minus) side to decrease the sensitivity until the first green LED slightly light up.

Welcome to NecomTelecom. Are you looking for customized information security solution? If so, I want to say thanks for your choice and you are right. Unlike other factories in this security industry, we can provide for you with customized solutions.

We are the first company in this industry to have its own brand “Vodasafe”, Since 2006 , Our Company started to provide products and services in the fields of prisons, military and police. We offer kinds of products and services worldwide. All of our products have attained CE and

FCC certifications and CMA Certification issued by the Public Security Ministry of China.

For Products, we have signal jammers, signal detectors and signal amplifiers.

Radio frequency jammers and detectors are mainly aimed at the destruction of terrorists.

They infringe on personal privacy and security through wireless devices,such as remote-controlled bombs, roadside bombs, and various weapons controlled by drones, wireless spy camera, spy bug, tracking device, eavesdropping devices, and so on. Signal amplifiers are mainly used for stop dropped calls and improve call quality in your home or working places or vehicles.

For Services, we have professional customer service staffs to help you make clear the requirements and recommend suitable solutions for you. Welcome to our factory to test and inspect products, except for your coming, we could supply video inspection, video conference and on-site service, We can send technical personnel to install and repair on site.

The future has come, We will invest more manpower and material resources in the field of information security products’ smart operation research to provide better service solutions for anti-terrorism and anti-riot activities.

Our company's principle is quality first, customer first. Your choice is our driving force. Please contact with us about your requirement for project or advices.