Drop Test Device To Check The Impact Resistance Performance Of Attachment Plug

Drop Test Device To Check The Impact Resistance Performance Of Attachment Plug

Product overview:

The apparatus is complied with UL 498 SD7.2 item, applied to Check The Impact Resistance Performance Of Attachment Plug, as a result of the test, there shall not be any breakage of the body or other damage that may adversely affect the function of an attachment plug.

Test Concept and Structure

Each of the devices wired onto flexible cord is to be subjected to an impact caused by dropping a cylindrical 10 lb (4.5kg) weight, having a flat face that is 2 inches (50.8mm) in diameter from a height of 18 inches (457mm). Each assembly is to be placed on a hardwood surface in any natural testing position. A cylindrical attachment plug is to have its major axis parallel to the surface. The hardwood surface is to be a maple block approximately 1-5/8 inches(42mm) thick by 4-1/2 inches (114mm) square and is to test on a fixed surface such as concrete floor.

As a result of the test, there shall not be any breakage of the body or other damage that may adversely affect the function of an attachment plug.

The cylinder weight is controlled by electromagnet, ensure the instantaneous release and vertical drop.

The cylinder weight is dropped through a guide pipe. The height of guide pipe is same as test height.

The apparatus would be provided with firm structure, good look, easy operation, high stability.

Operation Procedures​:

1.Power on the test equipment, then press “POWER” to be open.

2.Press “START” to conduct electromagnetic.

3.Stuck the cylinder weight to the electromagnet chuck.

4.Install the drop guide sleeve on the electromagnet chuck.

5.Place the oak block in the proper position and put the test sample on the center of the oak block.

6.Make sure the drop guide sleeve just perpendicular to the test sample, then the bottom end of the drop guide sleeve well touch the surface of the test sample.

7.Press “START” to cut off electromagnetic, the cylinder weight will drop on the test sample along the drop guide sleeve.

Take off the cylinder weight and drop guide sleeve, then check damage degree of the test sample

Technical parameters:

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, formerly known as HongTong Electromechanical Co., Ltd, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

HongCe products are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental test equipment; household appliances safety test equipment; wire and cable test equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.