button control needle flame tester

Brand Name:Haida

Model Number:6011-HD

Place of Origin:China

Needle Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is ...

Brand Name:KeRang

Model Number:NF-1

Place of Origin:China

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical ...

Brand Name:HongCe

Model Number:NF-1

Place of Origin:China

... of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the

Brand Name:kingpo

Model Number:KP-FT02

Place of Origin:china

... Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, ...

Brand Name:HJ

Model Number:NF-1

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not

Brand Name:YUYANG

Model Number:YY162

Place of Origin:China

... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The

Brand Name:PEGO Group

Model Number:NF-1H

Place of Origin:China

...Needle Flame Tester IEC60695-11-5 Flammability Test Equipment 1. Introduction The needle flame test apparatus is controlled by 7-inch color touch screen and PLC, the system comes with a flame calibration system. The shell is made of painted coating metal sheet and built-in air exhaust. The front panel is transparent for easy observation of the experimental process. The needle-flame tester consists of a dia.0.9mm needle...

Brand Name:KINGPO

Place of Origin:Mainland China

...Needle Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied in the production and quality control...

Brand Name:LAB TECH

Model Number:NFT

Place of Origin:China

...Needle Flame Tester ---- Model NFT Introduction: NFT Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester...

Brand Name:GESTER

Model Number:GT-MC35G

Place of Origin:China

... and easy to operate. wide range of parameter adjustment. Apply to the test standards IEC60695,GB5169, etc. Standards: IEC60695; GB5169 Feature 1. Needle Flame Tester: Glass windows 2.

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester

Place of Origin:China

Brand Name:CHENGFENG

...testing the flame retardant performance of electronic components, electrical devices, mechanical parts, injection molded parts and other electrical products. This machine simulates the small flame generated inside the product under fault conditions, and

Model Number:LR-K003

Place of Origin:China

Brand Name:Lonroy

IEC 884 Needle-Flame Tester Flammability Test Equipment for Electric Components 700 ºC 1. The reference standard IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, ...

Brand Name:SKYLINE

Model Number:SL-7610

Place of Origin:China

220V / AC 50Hz Flammability Testing Equipment Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low voltage electronic appliances, ...

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Needle Flame Test Apparatus For Fire Resistance Test Instrument of Plastic material IEC60695-11-5 Needle Flame Test Apparatus For Electronic components Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle...

Brand Name:Liyi

Place of Origin:Guangdong, China

Liyi IEC60695 Needle Flame Testing Machine Tester Flammability Chamber Product Description Needle flame tester is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, ...

Brand Name:GOLD

Model Number:GD-IEC 60695

Place of Origin:CHINA

... Needle Flame Combustion Test Chamber IEC 60695-11-5 For Electronic Plastic Needle Flame Combustion Test Chamber Production introduction: Needle Flame Tester is in accordance with standards IEC60695-2-2 and IEC60695-11-5 to design and produce .The tester ...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle flame tester by IEC60695-2-2 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, electrical ...