blast furnace high temperature centrifugal fan

Brand Name:SIMO

Model Number:SIMO Blower 6-11

Place of Origin:Henan China

...High Volume Blast Furnace High Temperature Centrifugal Fan Introduction This series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high...

Brand Name:ZR BLOWER

Model Number:ZR-HC SERIES

Place of Origin:China,Henan

...Core Characteristics 1. Definition A high-temperature centrifugal fan is a specialized centrifugal ventilation equipment capable of operating stably in high-temperature environments ranging from 100℃ to 900℃ (with some special models reaching up to

Brand Name:OFAN

Model Number:LD133N-48D3-00

Place of Origin:China

...High Temperature Centrifugal Fan With Purification Filtering Machine Pressure-optimized blower shaded pole motor Impedance protected DC centrifugal fans with backward-curved blades are used primarily for intake suction Since most of the pressure build-up takes place in the impeller, there is generally no need for a scroll housing Centrifugal fans have very good hydraulic efficiency and are ideally suited for high pressures Centrifugal fans

Brand Name:DAJING

Model Number:9-19-D

Place of Origin:HENAN PROVINCE, CHINA

...High Pressure Blower Fan Antiwear Hot Air High Temperature The Model 9-19 and 9-26 high-pressure centrifugal fan is extensively applied to transmit materials. The transmission medium is air or other non-flammable gases, which are harmless to human. The medium does not contain any adhesive materials. The gas temperature is ≤80℃,and the dust and particle volume are ≤150mg/m3. It is generally suitable for enforced high...

Brand Name:Popula

Model Number:Y9-38

Place of Origin:China

Large Industrial Boiler Dust-removal Centrifugal Fan This fan is designed to fit the equipment of 1-20t/h industries boiler and civil boiler of which equiped with the dust-removal fixture. Before installation, the fan must equip with the dust-removal ...

Model Number:9-19 9-26

Place of Origin:China

...High Pressure Centrifugal Fan Blower Centrifugal Ventilator Prodoct Description: 9-19, 9-26 Series High Pressure Centrifugal Fan Blower is widely applicable for conveying feed, air, non-corrosive and non-hypergolic gas which contains no adhesive substances, In gernerally, the convenying media temperature should not exceed 80 degree. The containing dust and hard particle not exceed 150mg/m3. It is fit for the high...

Brand Name:Brother Furnace

Model Number:BR-18HM / XD-18HM

Place of Origin:China

... the very good thermal effect. Double layer of furnace shell with fan cooling, the surface temperature is less than 60℃. Strength structured furnace roof, to ensure long life to avoid any collapse from continuous working. This furnace is mainly used for

Brand Name:ASLi

Model Number:RFD

Place of Origin:China

.... Features: 1. It has high-quality refractory materials and forming fiber module or lightweight ceramic. 2. Micro PID+SSR+ Timer, precise & reliable control 3. There are vents on rear wall, and it can be connected with fan or catalytic device. 4. It has

Brand Name:ANNEC

Model Number:DRL-65

Place of Origin:CHINA

...High Alumina Brick is widely used in metallurgical industry, like hot blast stove and blast furnace for Iron-making, lime kiln for production of lime, and rotary kiln and reheating stoves. DRL-65 Low creep High Alumina Brick​ can resist 1500 ℃ high temperature as well as keep good state, it also can resist compressive strength of at least 80Mpa, along iwth more than 30 times shock resistance (water cooling). DRL-65 Low creep High

Brand Name:Meibao

Model Number:MBZ,MBH

Place of Origin:Zhejiang, China

Energy-saving Biomass Fired Hot Air Drying Furnace / High Heat Efficiency Hot Blast Stove Product Description Biomass energy is a form of energy that solar energy stores in biomass in the form of chemical energy,i.e.the biomass as energy carrier.It is ...

Brand Name:SANWOOD

Model Number:SM-G

Place of Origin:guangdong, China

High temperature hot air blast drying oven Application Widely used in mining industry, laboratory, scientific research institute, etc for drying, baking and wax-melting, sterilization, etc. Features Large screen LCD display, many sets of data display in one screen, menu type operation interface, simple and understand easily, conveniently operating.(Standard configuration). Adopt draught fan speed control mode, which could improve the temperature

Brand Name:HAOFENG

Place of Origin:CHINA

This series are use for coercive ventilation in industries such as heating furnace,glass,electroplating,ceramics,etc,and are widely used for material transportation in processing Industries like food,feed and mineral powder.The transporting medium is air...

Place of Origin:Shandong

Brand Name:Shuangyi

Model Number:SY-3651

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;background-color:#2196ed;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root...

Brand Name:HUATAO

Model Number:HT-02

Place of Origin:CHINA

...fan Hot air circulation fan is a kind of fan that transfers heat with high-temperature gas. It is characterized by the ability to heat the gas and then transfer it to the substance that needs to be heated. Hot blast circulation machine is widely used in hot blast furnace, heat treatment furnace, industrial heat treatment, drying and other fields. How to choose the industrial fans...

Brand Name:ZHENGKE

Model Number:ZK3.0

Place of Origin:CHINA

..., uses in forging the stove and the high pressure forced draft generally, may also use in transporting the material, the air and does not have the corrosion, the spontaneous combustion, not explosive, not to be easy to volatilize, not to ...

Brand Name:CPMDJ

Model Number:YDK92-45-4XM

Place of Origin:Made in China

...gas pressure and discharge the gas. Centrifugal fans are widely used for ventilation, dust exhaust and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and induced air for boilers and industrial furnaces;

Place of Origin:Henan, China

Model Number:3,12,30,60,85,90

Brand Name:Hongtai

...materials, or introduce a small amount of zirconia, etc., after high temperature firing, the content of chrome trioxide is not less than 75%, chrome trioxide, alumina and Shaped refractory products with a total content of zirconia not less than 98%. It has

Brand Name:XDEM

Model Number:XDEM-1400BF

Place of Origin:China

... MoSi2 heater,etc.The furnaces/oven are designed with double shell with fan cooling which can make temperature raising quickly but keep outside similar as door temperature. Furnace temperature is controlled by high precision SCR digital controller with

Brand Name:RS

Model Number:RS-1.10

Place of Origin:CHINA

... high temperature,and used for blast furnaces and hot blast stove,the high temperature resistant, high strength and low impurities, etc. Applications For Silica Refractory Brick : Light weight silica bricks are primarily used for furnaces and kilns in