astm f1921 hot tack testing

Brand Name:YUYANG

Model Number:YYP-007

Place of Origin:china

... surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack tester is especially important for vertical form-fill-seal packaging. Features: Hot tack, heat seal, peeling and tensile test items are integrated in

Brand Name:KINSGEO

Model Number:KJ-6031

Place of Origin:CHINA

...Tack Measurement Machine 0~100N Loop Tack Testing Instrument Standard FINAT(FINAT test method No. 9: loop tack measurement), PSTC-16(Loop tack), ASTM D6195-03(Standard test methods for loop tack), GB/T31125-2014(Test method for initial viscosity of adhesive tape - ring method) and etc. Test Principle Fully contact the loop sample and standard float test...

Brand Name:PERFECT

Model Number:PT-6098

Place of Origin:Dongguan, Guangdong, China

... and other products. It is to separate the annular sample and the test board at a constant speed of 24mm2 at 300mm/min after reaching a constant speed of 24mm2 at a constant speed of 300mm/min (the foreign ...

Brand Name:BAXIT

Model Number:GLO-5604B

Place of Origin:Shanghai, China

...tack test machine Designed and manufactured in accordance with GB 4851 (Test Method for Pressure Sensitivity of Pressure-Sensitive Adhesive Tapes) and Adhesive Adhesion Test Standards. It is suitable for pressure-sensitive adhesive tapes, stickers, plasters, hot melts and other products to carry out the adhesion test. Test principle: Hang the test plate with the adhesive sample vertically on the test...

Brand Name:DAXIAN

Model Number:DX8359A

Place of Origin:China

ASTM C411-82 Thermal Insulation the Maximum Service Temperature Testing Equipment Description: The test method refers primarily to high-temperature insulations that applicable to hot-side temperatures in excess of 66℃. It is used for materials such as preformed insulations, insulating cements, blankets, and the like, by proper laboratory preparation of the samples. Standards: ASTM C411-82:Standard Test Method for Hot...

Brand Name:TORICH

Model Number:ASTM A53

Place of Origin:ZHEJIANG, CHINA

... 52,ST 37, 16Mn Size OD: 20*30-400*600mm WT: 0.5 - 2.5 mm Length: 1-12m Technique Hot Rolled, Electric Resistance Test Tensile Test, Hydraulic Test, Eddy Current Test Application Used For Water, Gas, Stream,

Brand Name:ZL

Model Number:ZL-6009

Place of Origin:China

ASTM D573 Hot Loop Aging Anti - Yellow Testing Machine With EGO Over - Temperature Guiding Light Main feature: Aging:this machine is to promote the deterioration of vulcanite, and then to calculate the change rate of ...

Brand Name:YUYANG

Model Number:YYJ031

Place of Origin:China

..., ASTM, JIS, ISO standards, salt spray test is for a variety of materials surface after coating, electroplating, anodizing, anti-rust oil, anti-corrosion treatment, test the corrosion resistance of its products. Specification Dimensions: 108L, 270L, 600L,

Brand Name:Haida

Model Number:HD-E808

Place of Origin:china

... CNS, ASTM, JIS, ISO standards, salt spray test is a variety of materials for the surface after coating, plating, anodizing, anti-rust oil, anti-corrosion treatment, testing the corrosion resistance of their products. Structural features 1, inside and

Brand Name:TOBO/TPCO/TISCO/VALIN/METAL

Model Number:Duplex Stainless Steel Pipe

Place of Origin:China/Japan/Germany

.../A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the Thpe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO. 4. The Pipe lengths : Unless otherwise agreed upon, all

Brand Name:TISCO, JISCO, BAO

Model Number:304

Place of Origin:China

Hot Rolled Stainless Steel Coil ASTM 304 Construction Structural Steel Roll Product: Hot Rolled Stainless Steel Coil Steel Grade: 304 Surface: NO.1 Thickness: 3-12MM Width: 1219MM / 4" , 1000MM , 1250MM Standard: ASTM, JIS, EN Delivery Time: 3-7 days. Large in stock. MTC is available Third-party test...

Brand Name:iqualitrol

Model Number:HL-120-SS

...ASTM B117 Salt Spraying Corrosion Testing Chamber Brief Introduction: Salt spray testing is popular because it is relatively inexpensive, quick, well standardized, and reasonably repeatable. Although there may be a weak correlation between the duration in salt spray test and the expected life of a coating in certain coatings such as hot dip galvanized steel, this test...

Brand Name:TISCO

Model Number:201 304 316L 310S 409L 420 420j1 420j2 430 431 434 436L 439

Place of Origin:JIANGSU

... and are superior to type 409 in oxidation resistance and corrosion tests. Compared with other ferrite materials, such as 409, 430 and 439, the addition of molybdenum enhances pitting resistance. The material is resistant to stress corrosion ...

Brand Name:TONGMAO

Model Number:CS TYPE A /B/C DS TYPE A /B

Place of Origin:China

Great Price of 40*20mm Hot Dipped Galvanized Pipe For Water Transportation Hot dip galvanized steel pipe The internal and external surface color bright, uniform; (2) The weld line is uniform, and each tube is tested by eddy current inspection; The hot dip ...

Brand Name:GNEE

Model Number:ASTM A795

Place of Origin:China

Product Description: ASTM A795 welded steel pipes play a crucial role in ensuring the safety of buildings and the people within them. These pipes are specifically designed for use in fire sprinkler systems, standpipe systems, and other fire protection ...

Brand Name:BAOWANG

Model Number:201,304,316L,430,etc

Place of Origin:CHINA

Astm Aisi 409l 410 420 430 440c Stainless Steel Coil 301 304 316 321 Stainless Steel Strip from China Product Name Astm Aisi 409l 410 420 430 440c Stainless Steel Coil/Strip 301 304 316 321 Thickness 0.3-6.0mm Width 600mm, 1000mm, 1219mm, 1500mm, 1800mm, ...

Brand Name:LIYI

Model Number:LY-6031

Place of Origin:Guangdong , China

Tack Tape Primary Computer Control Loop Tack Tester Less Than 1% Error Introduction: It is used to do the loop tack test of kinds of adhesive,tape,can meet FINAT (FINAT Test Method No. 9:measurement), ASTM D6195, PSTC 16 test standards. Work Theory: The loop tack specimen with touch with standard glass plate with constant speed 300mm/min,then the loop tack specimen will separate from test...

Brand Name:Haida

Model Number:HD-B609B-S

Place of Origin:Guangdong, China (Mainland)

... can be used for tape, paper, film tensile test with related tensile clamp. Adhesives Tape/Pressure Sensitive Tape EN 1719: Loop Tack Test ASTM D3654: Shear Adhesion Test ASTM D3759: Tensile &Elongation Test FTM: 180&90 Degree Peel Test, Loop Tack EN 1939,

Brand Name:HUST Tony

Model Number:HTZ-013

Place of Origin:Guangdong,China(Mainland)

...tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives. Technical indexes 1. Adjustable angle: 0 - 90° 2. Plate width: 130mm 3. Width for test: 100mm 4. Ball size: 1/32in - 1in 5. Dimension: 372mm(L)×167mm(B)×90mm(H) 6. Net weight: 6kg​ Standard GB 4852, JIS Z0237, ASTM...