api reg thread tricone drill bits

Brand Name:RuiTong Bit

Model Number:TCI tricone drill bit

Place of Origin:Hebei,China

Product Description: Main Stratigraphic Distribution 1. The Quaternary alluvial layer comprises humus soil in the upper part, ranging from 1.0 to 4.0 meters in thickness. In the lower part, there is an alluvial gravel layer measuring 45-120 meters, ...

Brand Name:ROSCHEN

Place of Origin:Germany, Australia, China

Model Number:4", 4-1/2", 5", 6-5/8", 7", 8-1/2", 8-5/8", 9", 10", 12", 13", 14", 16", 18"

... achieves maximum performance in a defined application. Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations. Roschen carry a large inventory of rerun bits and can also

Brand Name:MING

Model Number:Drill pipe 76MM-3000/3-3/8 API REG

Place of Origin:CHINA

...API Drill Rod 3-3/8 API REG Thread DTH Drill Pipe For Oil Drilling Product category: Drilling PIPE Threaded Connection: API 3-3/8 API REG Length: 3000mm KINGDRILLING DRILL PIPE DESCRIPTION: DTH drill rods (also called as drill tubes or drill pipes) are the mechanism to transmit impact force and rotation torque to DTH hammers and bits...

Place of Origin:Hebei,China

Product Description: Tricone Drilling Bits are designed with three rotating cones, each fitted with tungsten carbide blades, that can be used to drill through hard rock formations. These rotary rock bits are used in oil and gas exploration, geothermal ...

Brand Name:SOLLROC

Model Number:190mm

Place of Origin:China

... conditions you're dealing with, our drill bits make the job easier. They are fitted with Sollroc's proprietary cemented carbide buttons, which are designed to drill further. The drill bit bodies are made from precision hardened nickel molybdenum steel,

Brand Name:MIROC

Model Number:DTH drill pipe

Place of Origin:China

...API Reg Thread DTH Drill Pipe Length 1000mm - 6000mm Description In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH drilling...

Brand Name:ENG

Model Number:252101

Place of Origin:China

...API Reg Pin Diamond Drill Bit Matrix body PDC bit: This type of diamond PDC bit is made of tungsten carbide powder, and the gauge protection is TSP. PDC Drill Bits Classification by Applications: Mining Industry There are some 3-blade PDC bits mainly used for the mining industry in Australia and Russia, the formation is very soft. choosing a steel body PDC bit can save some drilling costs. Water well drilling...

Brand Name:JSBIT

Model Number:490mm 19inch IADC 437 / 535 Tci Tricone Bit

Place of Origin:Heibei province China

...tooth and tungsten carbide insert, in sizes from 37/8" to 36", for use in all formations, with any bearing: seal type / air type , tricone bits apply to oil gas geothermy mining water HDD and foundation industry. Main features: 1. Cutting Structure of this

Brand Name:Shitan

Model Number:STR

Place of Origin:HEBEI CHINA

...Drilling Three Cone Rock Roller Tricone Bit Multiple Sizes Tricone Bit Description This API-standard tricone drill bit is designed for water well drilling in medium-hard formations with low compressive strength. Featuring a rubber-sealed bearing, 3 1 2 API Reg pin thread, and gauge protection, it ensures durability and precise performance. With a weight of 20kg and compatibility with SY T5164 standards, it delivers reliable drilling

Brand Name:Tianying

Model Number:IADC435

Place of Origin:Hunan CHINA

... bits. In roller-bit drilling, rock is cut by hard-alloy teeth projecting from rolling cutters, which rotate on the drill-bit bearings. Inturn, the drill bit rotates at a high rate, and presses against the bottom hole with a high axial force. The teeth of

Brand Name:FLRT

Model Number:9 5/8" FSG515G

Place of Origin:China

... Insert Connection : 6 5/8 inch API REG PIN Nozzle : three jet (side) nozzles SIZE AVAILABLE From 3 7/8inch to 36inch RECOMMENDED DRILLING PARAMETERS FOR APPLICATION Types & IADC Code 415 435 445 515 525 535 545 615 625 635 WOB KN/mm(Bit Dia.)

Brand Name:GLORYTEK

Model Number:5 3-8"

Place of Origin:China

...Tricone Drill Bit IADC 537 Description Size: 5 3/8 inches (about 136.5mm), IADC537, designed for hard to extremely hard abrasive formations (such as dolomite, quartzite, siltstone) Technical Parameter Diameter: 5 3/8" IADC CODE 537 Cone type: Tungsten carbide teeth Bearing type: Journal bearings Seal type: rubber-sealed Thread connection: API 2 3/8 regular pin Applications Efficient Drilling...

Brand Name:JCDRILLS

Model Number:14inch

Place of Origin:Hebei,China

API sealed bearing Milled tooth tricone rock bit and steel tricone drill bit tunsten carbide for water well Application 14inch API Sealed Steel Tooth Tricone Drill Bit for Rotary Mining Drilling IADC 214 / 215 / 216 / 217 is suitable for various formations...

Brand Name:Pangolin

Place of Origin:HeBei China

Model Number:Tricone Rock Bit

Hybrid drill bits reduce drilling costs through faster and more durable oil and gas drilling performance Describe The tricone drill bit is the most popular drilling bit in the world, it can be widely used for Oil&Gas Drilling,Mining,Water Well,Geological ...

Model Number:All types

Place of Origin:China

...Reg - NC46 Crossover Sub For Connect Water Well Tricone Drill Bit And Drill Pipe Description of crossover sub: Crossover sub is mainly used to connect upper and lower drill tools in different connectors in drilling operations. Also it can be used to protect other tooling in drill stem (called saver sub) or be used to deliver outgoing air to the bit face just above the bit (called bit...

Brand Name:MIROC

Model Number:IADC537 Tricone Bit

Place of Origin:China

API 3 1/2 IADC 537/547 Tricone drill Bit For medium formation IADC WOB (KN/MM) RPM (r / min ) Applicable formations Diameter API Weight 537/547 0.5~1.05 110~40 Low compressive strength,medium hard formation with hard abrasive interlayer, like hard shale, anhydrite, soft limestone, sandstone,dolomite with mezzanine, etc. 152.4mm/ 6" 3 1/2 19.5kg TCI Tricone bits...

Brand Name:OED/OEM

Model Number:45 MM SR35 (R32)

Place of Origin:China

BIT 45 MM SR35 (R32) Drilling accesories for tunneling tricone drill bit Feature Premium designs and steel and premium tungsten carbide insert grade T6 supplied by Boart Long year, Offers industry-leading strength and penetration rates for more ...

Brand Name:OHANG TECH

Place of Origin:CHINA

Milled / Inserted Teeth Tri-Cone Bits Basic Info. Transport Package Paper Box Origin Hebei HS Code 8207191000 Production Capacity 50000 Product Description Product Features SRM (Slide Bearing-Rubber Sealing Milled Teeth) bits can load a higher WOB in ...

Brand Name:N&D

Model Number:ND NOZZLE 02

Place of Origin:CHINA

Drill Bit Tungsten Carbide Nozzles Tungsten Carbide Nozzles for PDC Bits Nozzles for PDC bits, Tricone bits are mainly used for cooling water and washing mud. We have two types of carbide nozzles, thread nozzles and no thread nozzles. We sincerely would ...