annealing surface fe cr al alloy

Brand Name:Tankii

Model Number:Ocr21al4

Place of Origin:Shanghai

... FeCrAl Resistance Strip for Automobile Tail Gas Purification OCr21Al4 is one kind of normal material of Fe-Cr-Al alloy. FeCrAl alloy has the characteristic of high resistivity,low temperature resistance coefficient,high operating temperature,good anti...

Brand Name:SPARK

Model Number:Cr15Ni60

Place of Origin:Beijing, China

... than Fe-Cr-Al alloys. No brittleness after high temperature cooling, long service life, its easy to process and welding, but the service temperature is lower than Fe-Cr-Al alloy. Ni-Cr electrothermal alloys are one of the main products of our company.

Brand Name:GME

Place of Origin:China

Heating Resistance Wire Fe-Cr-Al Alloy 0Cr25Al5 Flat Tape Round Wire Introduction: High temperature heating wires are used for making electric heating elements in ...

Brand Name:MTSCO

Model Number:MTSCONACT10

Place of Origin:CHINA

...Alloy Welded Coiled Tubing With Bright Annealed Surface Grade: Alloy 625/UNS N06625, Alloy 825/UNS N08825 etc. Standard: ASTM B704, ASTM B751 OD: 2.38-25.4mm WT: 0.51-2.65mm Length: ＜10000 m/coil Alloy 625 Chemical composition % Ni Cr Mo Fe C Mn Si P S Co Nb+Ta Al Ti min 58.0 20.0 8.0 3.15 max 23.0 10.0 5.0 0.10 0.50 0.50 0.015 0.015 1.00 4.15 0.40 0.40 Alloy 825 Chemical composition % Ni Fe Cr C Mn Si S Mo Cu Ti Al...

Brand Name:Senphus

Model Number:6J22/6J422

Place of Origin:China

Karma Ni-Cr-Al-Fe 6J22/6J422 Precision Resistance Wire High-Performance Solution for Fine Resistance Elements Karma Ni-Cr-Al-Fe 6J22/6J422 is a precision resistance wire composed primarily of nickel (Ni), chromium (Cr), aluminum (Al), and iron (Fe). It is ...

Brand Name:DINGSCO

Model Number:According to customers' requirements

Place of Origin:China

Incoloy 800 Forged Ring Ni-Fe-Cr Superalloys Circle-Shaped Components Incoloy 800 Forged Rings are forged ring-shaped precision components made of Ni-Fe-Cr-based superalloys, with the following core features and applications: 1. Core attributes ▶...

Brand Name:Xienuo Aluminum

Model Number:1050 1060 1070 1100 3003, 3004, 3005, 3105 5052, 5083, 5754, 5005, 6061,7075

Place of Origin:China

Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.4 0.05 0.05 0.05 _ 0.05 0.03 0.03 _ ≥99.5 1060 0.25 0.35 0.05 0.03 0.03 _ 0.05 0.03 0.03 _ ≥99.6 1100 Si+Fe:0.95 0.05~0.40 0.05 _ _ 0.1 _ 0.05 0.15 ≥99 1200 Si+Fe:1.00 0.05 0.05 _ 0.1 0....

Brand Name:DLX

Model Number:incoloy 800H

Place of Origin:China

Prime Quality Incoloy 800 / 800H / 800HT Alloy Wire Price Manufacturer Inconel Series Features: Incoloy 800 wire has a restricted carbon content range of 0.05 to 0.10%, which is in the upper portion of that of Incoloy 800, and is annealed at 1149 to 1177...

Brand Name:Victory

Model Number:Incoloy Alloy

Place of Origin:China

... to high temperatures and corrosion. The Fe-Ni-Cr Alloy is widely used in various industries, including aerospace, automotive, and chemical processing. The Incoloy Alloy has a bright and oxided surface, which makes it suitable for applications that

Brand Name:HAOSTEEL

Model Number:T3 T351 2024

Place of Origin:CHINA

Aluminium Alloy Sheet Plate T3 T351 2024 With DNV ABS BV Lloyd's Class Cert Chemical composition: % Si Fe Cu Mn Mg Cr Zn Ti Al Min 3.80 0.30 1.20 Max 0.50 0.50 4.90 0.90 1.80 0.10 0.25 0.15 Remainder Thickness (T) Width (W) Length (L) 0.50mm 1220mm ...

Brand Name:MITTEL TISCO BAO STEEL

Model Number:431 1Cr17Ni2

Place of Origin:China

...Annealed Surface Black Hot Rolled SS AISI 431 Round Shaft Dia185MM For Glass Moulds Stainless Steel Grade 431 Technical Data Sheet Alloy 431 is the most corrosion resistant of the martensitic grades. Due to Alloy 431's excellent tensile and torque strength and good toughness it is used in structural parts that are exposed to marine atmosphere, also for aircraft fasteners and fittings. Chemical Composition Limits Weight% C P Si Ni Mn S Cr

Brand Name:Tisco

Model Number:PPGI

Place of Origin:JIANGSU, CHINA

PRODUCT DETAILS Advantages 3003 is AL-Mn alloy, which is the most widely used antirust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum), and it cannot be strengthened by heat treatment. Therefore, ...

Brand Name:ABOOM

Model Number:UNS S32760

Place of Origin:CHINA

SS Pipe Zeron 100 Uns S32760 F55 Super Duplex Tube Corrosion Resistance S32760 / F55 Super Duplex Stainless Steel Pipe Zeron 100 Industrial pipe 25%Cr Pren ≥40.0 UNS S32760 25% chromium duplex stainless steel National standards: ASTM / ASME: A240-UNS ...

Brand Name:OHMALLOY

Model Number:214W0457B

Place of Origin:China(Shanghai)

Power Resistor 0Cr21Al4 High Temp Alloys 750Mpa Tenstrength 1.5mm x 40mm OhmAlloy123 (Common Name:0Cr21Al4 Fe-Cr-Al alloy FCHW-2, also named 0Cr21Al4, is one kind of material Fe-Cr-Al alloy. Fe-Cr-Al alloy has the characteristic of high resistivity,low ...

Brand Name:Torich

Model Number:ASME SB163

Place of Origin:China

...Alloy Pipe Quick detail: OD:3.18-114.3mm WT:0.5-12mm Standard:ASME SB163 Referenced documents: ASTMB829 ASTMB880 Material: N08825 Delivery condition:Annealed Chemical Composition: Alloy Nickel Cu Mo Fe Mn Max C Si Max S Max Cr Al Ti UNS N08825 38-46 1.5-3.0 2.5-3.5 22 min 1 0.05max 0.5 0.03 19.5-23.5 0.2 max 0.6-1.2 Nickel-Iron-Chromium-Molybdenum-Copper alloy UNS N08825 Annealed...

Brand Name:Torich

Model Number:ASME SB163

Place of Origin:China

...Alloy Seamless Steel Tube Quick detail: OD:3.18-114.3mm WT:0.5-12mm Standard:ASME SB163 Referenced documents: ASTMB829 ASTMB880 Material: N08825 Delivery condition:Annealed Chemical Composition: Alloy Nickel Cu Mo Fe Mn Max C Si Max S Max Cr Al Ti UNS N08825 38-46 1.5-3.0 2.5-3.5 22 min 1 0.05max 0.5 0.03 19.5-23.5 0.2 max 0.6-1.2 Nickel-Iron-Chromium-Molybdenum-Copper alloy UNS N08825 Annealed...

Brand Name:BLM-IY-1

Place of Origin:Jiangsu, China (Mainland)

...Fe Ni Cr Al+Ti Ti Al 800H 0.05-0.10 39.5min 30.0-35.0 19.0-23.0 0.3-1.2 0.15-0.6- 0.15-0.60 800HT 0.06-0.10 39.5min 30.0-35.0 19.0-23.0 0.85-1.2 0.25-0.60 0.25-0.60 2. Density and Melting point Density 8.14 g/cm³ Temperature 21-93°C Melting point 14.0um/m°C 3. Mechanical Properties Finish Condition Tensile Strength (Ksi/Mpa) Min Yield Strength (Ksi/Mpa) Min Elongation (%) Min Annealed...

Model Number:M290-50A, M350-50A

Place of Origin:Jiangsu, China

Brand Name:Screw Metal

...alloy pipe and tube price per kg Products Description NCONEL 600 COMPOSITION Ni:72.0 min Mn:1.0max Cr:14.0-17.0 S:0.015max Fe:6.0-10.0 Si:0.5max C:0.15max Cu:0.5max INCONEL 601 COMPOSITION Ni:58.0-63.0 Mn:1.0max Cr:21-25.0 Si:0.5max Al:1.0-1.7 S:0.015max Fe:Remainder Cu:1.0max C:0.1max NCONEL 625 COMPOSITION Ni:58.0min Si:0.5max Cr:20.0-23.0 S:0.015max Mo:8.0-10.0 Al...

Brand Name:CHANGSHENG

Model Number:BT22/TC18

... titanium alloy with a nominal composition of Ti-5Al-5Mo-5V-1Cr-1Fe. Its chemical composition range is as follows: 4.5%-5.9% Al, 4.0%-5.0% Mo, 4.0%-5.5% V, 0.5%-2.0% Cr, and 0.5%-1.5% Fe. In the annealed state, the alloy possesses a high level of strength,