90mm 3 1 2 dth drill bits

Brand Name:SOLLROC

Model Number:M30 dth bits

Place of Origin:China

...90mm 95mm 100mm M30 DTH Drill Bits For Rock Drilling SOLLROC is a leading manufacturer of rock drilling tools, like DTH hammers and bits, DTH drill pipes, RC hammers and bits, tophammer button bits, coupling, cross bits, drill rods located in Changsha, Hunan, China. We have rich experience in this field of DTH hammers and bits...

Brand Name:MIROC

Model Number:Hammer Drill Bits

Place of Origin:Shangdong,China

...90mm 105mm Blast Hole DTH Drill Bits Good Wear Resistance In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH bits are paired with their corresponding hammers (by drilling...

Brand Name:MIRCO

Model Number:CIR90 DTH hammer bit

Place of Origin:China

... air and transmitting an intensive percussion energy to the bit to enable the drilling by crushing the rock. Drilling method by DTH hammer exerts high drilling performance especially for drilling hard rock and contributes for shortening work schedule.

Brand Name:MING

Model Number:MDHD25-90

Place of Origin:CHINA

...pressure DTH button bit description: Kingdrilling has become The Driller’s Choice for some of the world’s small and middle mining projects, thanks to a reliable quality and high cost performance that can supply and ...

Brand Name:MTH

Model Number:190mm diameter

Place of Origin:CHINA

...DTH Hammer Gold Color Mining Drill Bits DTH Drill Bit Specification: Bit size Shank type Recommended DTH bit diameter 3.5''/3'' DTH Hammer bits COP34, DHD3.5, MISSION30, BR3 shank 90mm to 105mm 4'' DTH Hammer bits DHD340, QL40, MISSION40, SD4 shank 110mm to 130mm 5'' DTH Hammer bits DHD350, QL50, MISSION50, SD5 shank 134mm tio 152mm 6'' DTH Hammer bits...

Brand Name:Super Diamond

Model Number:CD35-90

Place of Origin:China

3 inch down the hole rock drill bits used for dth hammer Product Application Product Name: DTH Drilling Hammers And Button Bits With Long Service Life Description: dth drilling hammers and button bits DTH hammers are used for high air pressure mining dth ...

Brand Name:SUVEC

Model Number:DTH Hammer Bits

Place of Origin:China

...DTH Hammer Bits Low Air Pressure CIR80 CIR90 90mm DTH Drill Bit In Down the hole drilling, the DTH hammer bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling...

Brand Name:QIDELI

Model Number:CIR90

Place of Origin:PUTIAN FUJIAN CHINA

...dth bits , most widly use product in world,energy saving and cost effective CIR90 series is the most used product in mining, It's a kind of drill bit which is cost-effective and energy saving. the hole diameter of bit using on CIR90 hammer is from 90mm too 130mm. this prdouct is very popular in developing country. CIR90 Hammer parameter: Length of CIR90 hammer: 885mm Diameter of out cylinder: 80mm Weight of hammer(without bit...

Brand Name:ROSCHEN

Model Number:CIR90

Place of Origin:CHINA

...Drilling DTH Drill Bits 90mm For Stone Quarrying ROSCHEN is committed to providing the best drilling and cutting machine, tools and accessories products in marble and granite stone quarrying, as well as in civil engineering application, especial demolition project. General Introduction: DTH Drill Bits are one of our main products. After many years develop, we have rich experience in develop and manufacture high quality DTH

Brand Name:New Diamond

Model Number:BR2

Place of Origin:Hunan, China (Mainland)

ND65 DTH Drill Bits Description 1. Because of fast drilling speed and long service life, the drilling cost is reduced and drilling cost is greatly reduced. 2, high drilling efficiency: drill teeth wear resistance, so that the drill can always be sharp...

Brand Name:Kinglong drilling

Model Number:Down the Hole DTH bits

Place of Origin:China

...’ hammer shank designs to match various drilling applications. Our drill bits are multiple heat-treated to enhance hardness, surface-compressed for fatigue resistance, all thus to extend the product life for maximum wear and performance in the

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

Russia best selling oil well use rc drill bit/Reverse circulation bit 1.Based on previous experience of ordinary hammers, combined with the features of reverse circulation hammer, optimized internal structure and ideal energy transfer, thus ensuring the ...

Categories:DTH Drill Bits

Country/Region:china

We are capable to design and manufacture according to customer's requirement on the Bit DiaNo., Air holes, carbide button shape and the bit face shape. High air pressure and low air pressure. Thanks to our long year experienced technicians and engineers...

Brand Name:keming

Place of Origin:China

Keming Different Size Drilling Bit For Rock And Soil In Stock Introduction: Drill bit and drill rod Drill bit diameter:36mm,50mm,60mm,90mm,100mm,110mm,120mm,130mm,150mm Drill rod diameter:50mm,60mm,90mm Company introduction: Henan Coal Science Research ...

Place of Origin:China

Brand Name:EST

Model Number:all types

Parameters of DTH bit (Down the hole drilling hammer) type drill diameter mm(inch) weight (kg) TH79(3.5inch) 90mm-100mm(3 1/2-3 7 /8) 4-4.5 DHD3.5 90mm-105mm(3 1/2-4 1/8) 4.5-5.5 BR33 90mm-100mm(3 1/2-3 7 /8) 4-4.5 DHD340 105mm-138mm(4 1/10-5 2/5) 8-12 ...

Place of Origin:Zhejiang, China

Brand Name:Sanrock

Rock Drilling Down The Hole Hammer Without Foot Valve Api Certification Hammers Size Bit Shank Connection Thread Connection Thread 2' BR2/HD25 RD50 box 70-90mm 3' DHD3.5/COP32/COP34/QL30/M30/BR3/BR33/XL3/Mach303 API 2 3/8" Reg 90-110mm 4' DHD340/COP44/QL40...