8mm carbide rod

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:Various

Place of Origin:Hunan, China

YL10.2 Tungsten Carbide Rod 0.8mm Cemented Carbide Rod Bar Wholesale Carbide Rod Blank For Cutting Tools Feature 1. High hardness after quenching and tempering 2. Excellent wear resistance and high flexural strength 3. Good performance at high temperature ...

Brand Name:zhenfang

Model Number:ZF-TC0193

Place of Origin:Zhuzhou,China

... rods produced with high temperature resistance and high hardness and toughness, widely used in PCB micro drills, for making drills, end ...

Brand Name:OUQI

Model Number:Straight Coolant Rods

Place of Origin:China

OD8mm cemented carbide rods with straight hole rods for drilling blanks Specifications: Outer diameter 8mm h6 -0.008 Inner diameter: 1.0mm ±0.15 Length: 330mm 0/+5mm or cut-to-length Surface roughness: Ra 6.3 as Raw sintered Carbide grade datasheet ISO ...

Brand Name:VKD

Model Number:Tungsten Carbide Rod

Place of Origin:Zhuzhou

Polished Tungsten Carbide 2mm 4mm 6mm 8mm 10mm Rod With H6 Standard On Big Sale Grades: Grade Density T.R.S Hardness Properties & Applications g/cm3 N/mm2 HRA VKD800 14....

Brand Name:OED or OEM

Model Number:Detector Rods

Place of Origin:China

...Carbide Rod With M6 Thread Detector Rods HRA 91.9​ Polished carbide detector rods with thread M6. General Dimensions: Outer diameter 6mm Length 40mm Ball size 8mm Perpendicularity 0.02mm Circularity 0.02mm Thread M6 Remove all sharp edges. It is used for testing the equipment detector head. All surface Ra 0.2 Carbide...

Brand Name:Rixin

Model Number:K20

Place of Origin:China

... scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to

Brand Name:SYL

Model Number:6013

Place of Origin:China

8mm aluminum rod carbide solid round aluminum alloy bar rod 2024 aluminum price per kg These sheets and bars are precision ground either on all six sides or just on the top and bottom. The most widely used aluminum, 6061 is fabricated into everything from ...

Place of Origin:China

Brand Name:SONGYU

... carbide rods are mainly made of silicon carbide, while other elements may use different materials. This enables the silicon carbide rods to have a superior performance in high-temperature resistance. Its equal-diameter structural characteristic is also

Brand Name:Xincheng

Model Number:XA95

Place of Origin:Xiamen

A highly cost-effective tungsten carbide rod blank raw materia Xiamen Xincheng Wholesale Tungsten Carbide Rods Factory, specializing in wear-resistant and impact-resistant tungsten carbide rods. Unground Carbide Rods-Inch Type Dimension Grade D Tolerance ...

Brand Name:Weiye

... of production more the 200 tons yearly. our main products lines are carbide rod, carbide roll, carbide drawing dies and carbide strip and plate. especially the carbide rod, in order the meet the requirments of marked, we built a new production line for

Brand Name:SEEGO CARIBDE

Model Number:Dia from 0.3-40mm, Length 330mm

Place of Origin:CHINA

...Carbide Rods with Coolant Oil Hole Duct Series-Our Tungsten Carbide Rod includes the below series: : NO. Series 1 Solid Unground Tungsten Carbide Rod Blanks 2 Cemented Carbide Rods with One Straight Coolant Hole 3 Tungten Carbide Rods with Two Straight Coolant Holes 4 Solid Carbide Rods with Two 15° 30° or 45° 65° Helical Holes 5 Cut-to-Length(CTL) Tungsten Carbide Rod...

Brand Name:LIAN XIANG

Place of Origin:ChengDu China

... PCB micro-drill. 3. Make hard alloy mandrel and other wear-resistant parts. 100% Virgin Materials Polishing Tungsten Cemented Carbide Rod/Bar 1. 100% virgin raw materials. 2. Various kinds of grades are availalbe based on

Brand Name:OME

Model Number:custom

... carbide round bars, with an outstanding product line of coolant and solid carbide rod. Size D* L mm tolerance D (Blank,mm) D(Grinding,mm) L(mm) φ(1-5)* 330mm , +0.30/+0.45 h6/h7 0/+0.5 φ(6-20)* 330mm , +0....

Brand Name:Gold sword

Model Number:can be customized

Place of Origin:ZHUZHOU

...Advanced production equipment/test equipment (With HIP sintering). 3. With production experience over 10 years. We can make extruded tungsten carbide rod or die pressing tungsten carbide tube. 4. Standard length 100mm and 330mm, dia. from 0.5mm to 60mm,

Brand Name:Fengke

Model Number:300mm

Place of Origin:China

... nonferrous metal, hardening steel, and chilled iron, with high wear resistance. Tungsten carbide rods are also commonly used in construction projects because they are very durable and resistant to corrosion. They are often used as reinforcement rods in