80n flexible cable test apparatus

Brand Name:PEGO GROUP

Model Number:PG-CRT

Place of Origin:China

...Flexible Cable Retention Force Test Apparatus 220V/50Hz 1. Introduction This device is manufactured according to the IEC60884-1 clause 23.2 figure 20. It is used to check the effectiveness of the retention of the cable by the cord anchorage. It’s applied to the removable plug, removable mobile socket, non-rewirable plug, rewirable mobile socket. The according tensile force of the flexible cable: The rated current of the flexible cable

Brand Name:Kingpo

Place of Origin:China

....2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested. The

Brand Name:HongCe

Model Number:HDX1302

Place of Origin:China

...consists of a carrier C, a driving system for the carrier and four pulleys for each Sample of cable to be tested. The carrier C supports two pulleys A and B, which are of the same diameter. The two fixed pulleys, at either end of the apparatus, may be of a

Brand Name:Sinuo

Model Number:SN2302

Place of Origin:China

...Test Apparatus For PVC Insulated Flexible Cables Testing PLC Control Product information: The flexing test apparatus is designed and manufactured according to standard SANS /IEC 60227-5 SANS/IEC 60227-2 PAGE 4 of 18 SANS 1574-2 SANS 1574-3 SANS 1574-4 SANS 1574-5 SANS/IEC 5515 etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ mechanical strength flexing test...

Place of Origin:China

Brand Name:KeRang

...Flexibility Tester HDX1303 Feature:A sample with a length of 3m±0.05m shall be tested in an apparatus similar to that shown in figure 2. Two clamps, A and B, shall be located at a height of at least 1.5m above ground level. Clamp A shall be fixed and clamp B shall move horizontally at the level of clamp A. The ends of the sample shall clamped vertically (and remain vertical during the test...

Brand Name:VOUCH

Model Number:5705

Place of Origin:CHINA

Technical feature: import thermal 2mm stainless steel molding by numerically control,beautiful,durable Special burner and clamp ,complete accord with standard r 0e`12 quirement Use Silicon current controller adjust electric circuit Digital display test ...

Brand Name:HJ

Model Number:HDX1303

Place of Origin:China

...Test Equipment Electric Static Flexibility Test Apparatus For Completed Flexible Cables Standard: IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements. IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. Application: It is used for checking mechanical strength of completed flexible cables. This test...

Brand Name:SHC

Model Number:SC-SFT

Place of Origin:China

.../750 V-Part 1:General requirements, IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking mechanical strength of completed flexible cables. This test does not

Brand Name:AI

Model Number:AIJR-16A

Place of Origin:CHINA

...test apparatus is suitable for measuring the flexibility, adhesiveness, thermal shock and other performances of the film of enameled round wire with nominal conductor diameter below 1.600mm; 3.Used with JRB-16 enameled round wire winding test bar; 4.This winding test apparatus...

Brand Name:Sinuo

Model Number:SNQC1009

Place of Origin:China

...Flexibility Testing Apparatus for EV Plugs and Socket-Outlets Complied Standards & Clauses The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure The Flexibility Testing Apparatus...

Brand Name:DAXIAN

Model Number:DX8817

Place of Origin:China

...cables of rated voltages up to and including 450/750V load core test apparatus Description: It is mainly used for core breaking test of flexible wire. Standards: GB/T5023.1-2008, GB/T5023.2-2008. Technical indicators: Dimensions 50(L)x 50(W)x 150(H)cm heavy hammer 0.5kg Test height 0.8M test current 0.1A test...

Brand Name:Delta

Model Number:3MC

Place of Origin:China

...placed horizontally under the definite fire condition. 3MC Cable Burning Smoke Density Test Apparatus comprises a cubic enclosure and a photo-metric system(the outer test chamber is not supplied by us, customers should build the room by themselves.) The

Brand Name:GOLD

Model Number:GD-MT 386

Place of Origin:China

...mining cables is designed and manufactured according to the corresponding requirements of the MT818-2009 coal industry standard. It is suitable for flame retardant tests of flame retardant cables and flame retardant cable joints for coal mines. When the

Brand Name:Lonroy

Model Number:LR-Q003

Place of Origin:China

...flexible boards that can be bent (commonly known as flexible circuit boards, flexible OLED screens and flexible materials). 2. Specification Test station Single station Maximum product size for testing 200×140×0.5mm Compression stroke Adjustable from 0

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...25.15, IEC60065: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:Gaoxin

Model Number:GX-4007

Place of Origin:China

Cable Wire Softness Tester For Winding Flexibility Test In Cable Testing Equipment 1.Quick Details: Alternative name Winding flexibility tester Function Test softness of cable when winding Feature Electric drive Weight 100kg Volume 600×1500×700cm Test standard JIS, CNS 2.Equipment Description: Put a 5mm cable on two wheels, give some loading on two ends and let the electricity cycled at speed of 0.33m/sec with test...

Brand Name:I-suntop

Model Number:GFK-1000

Place of Origin:China

...Optical Fiber Cable Impact Testing Machine is intended to determine the ability of optical fiber cable withstand impact. Apparatus The apparatus allows a hammer with a 25mm rounded edge to drop vertically on a cable sample fixed on a flat steel plate. The

Brand Name:Hust Tony Instruments

Model Number:HTB-052

Place of Origin:China

...Test Apparatus for flame spread,heat release and smoke production on electric or optical fibre cables under fire condition This test apparatus is used for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions. Install the wire or cables...