8 channels fiber optic circuit board

Brand Name:CENO

Model Number:ECN000-0350-03P4-02P2-04S-04F-GY-IP67

Place of Origin:China

...Channels Fiber Optical Rotary Joint With integrated power and 485 signal This is a customized non-standard integrated slip ring with high protection from CENO electronics, there are 3 circuits for 50A, 3 circuits of 20A, 2 circuits for 10A, 2 rings for 485 Signals and 4 channels for single mode of fiber optic. Fiber optic...

Brand Name:JARCH

Model Number:JSR-FO-LX6

Place of Origin:Shenzhen , China

150rpm Six Channels Fiber Optic Rotary Joint / FORJ 2800g/pc OD:67mm Feature: Special fit for fiber optics and electrical circuits. Available in single and multi-channel options 2-24electric circuits Combination + 6 channel fiber optics Type applicatin:...

Brand Name:hanxin or OEM

Model Number:1*8 steel tube splitter

Place of Origin:Shenzhen ,China

...Channels Fiber Optic PLC Splitter Cable 1x8 Steel Tube Sc Apc Gpon Connector Planar light-wave circuit splitter (PLC Splitter) is a type of optical power management device that is fabricated using silica optical wave-guide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in FTTX PON to realize optical...

Place of Origin:Shenzhen

Brand Name:Fiberroad

Model Number:FR-COM-6A

...Channel Fiber Optic MUX DEMUX / fiber optic module cwdm dwdm Description For this 6Ch Mux/Demux can be packeled into 1U Rack with low loss and reliable performanece. Board passbands and high isolation. They feature up to 6 low dispersion channels, thereby enabling high capacity, low cost products for the CATV and metro/access markets. . Applications l Line Monitoring l WDM Network l Telecommunication l Cellular Application l Fiber

Brand Name:Liocrebif

Model Number:LKF-FOGTS001

Place of Origin:China

... of fiber optic gyro acquisition and testing at the same time. The whole system is divided into two parts: the acquisition board hardware and the host computer control system software. The acquisition board provides 8 channels, which can be connected to

Brand Name:CY COM

Model Number:SC-PCB

Place of Origin:Shenzhen China

...Fiber Optic Coupler For PCB Circuit Board SC Fiber optic adapters with Press-fit Elastic iron ,Plastic Fit pin fiber optic coupler used For PCB circuit board​ Description: Optical fiber adapter is mainly used to connect optical fiber or optical cable to each other when installing optical fiber system to realize optical link connection; The SC fiber optic...

Brand Name:senring

Model Number:FO108

Place of Origin:CHINA

...channel Fiber-Electric slip ring Fiber Optic rotary joint also called 1 channel Fiber Optic slip ring,1 channel fiber(support single mode/multi-mode) can transmit date without loss when 360° unrestricted roating. Features 4.No contact, no friction, long life, > 100 million revolutions (signal channel model is 20-30 million revolutions); 1. Support 1 channel fiber (single mode/multi-mode)@ Max circuit...

Brand Name:HICORPWELL

Model Number:Fiber optic SC/APC adapter for PCB circuit board

Place of Origin:China

Fiber optic SC/APC UPC adapter for PCB circuit board Description: Fiber optic SC/APC adapter for PCB circuit board is a fiber optic connector on the activities of linking components. The complete series of products, including FC, SC, ST, LC, MTRJ, widely used in optical distribution frames (ODF), and optical fiber communications equipment, instrumentation, performance is stable and reliable . Fiber optic adapter is also called fiber optic

Brand Name:Seacent

Model Number:2*8

Place of Origin:Guangdong,China

...Fiber Optic PLC Splitter Description Seacent Photonics lightwave circuit (PLC) splitter is a kind of optical force the board gadget that is created utilizing silica optical waveguide innovation to circulate optical signs from Central Office (CO) to different reason areas. It includes little size, high unwavering quality, wide working wavelength range, and great channel-to-channel...

Brand Name:CY COM

Model Number:SC-PCB

Place of Origin:Shenzhen China

...Fiber Optic Coupler For PCB Circuit Board SC Fiber optic adapters with Press-fit Elastic iron ,Plastic Fit pin fiber optic coupler used For PCB circuit board​ Description: Optical fiber adapter is mainly used to connect optical fiber or optical cable to each other when installing optical fiber system to realize optical link connection; The SC fiber optic...

Brand Name:TTI Fiber

Model Number:S-1

Place of Origin:China

...Fiber Optic Splitter With SC Connector 1. Description: Fiber Optic Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and this passive splitter widely used in FTTX PON to realize optical signal power management. PLC splitter is based on planar Lightwave circuit

Brand Name:FOCC

Model Number:FOCC-SP007

Place of Origin:China

...Fiber Optic Planar Lightwave Circuit Splitter for FTTX / CATV Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. Fiber optic splitter and coupler are used to split or combine optical signals in various kinds of networks, it features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical

Brand Name:Firepower

Model Number:MFOG910

Place of Origin:china

...Fiber Gyro Fiber Gyro Angular Rate Sensor Substitute Gyro Sensor of Vg910 Composition The main components of the product are as follows: 4) An optical path comprise an SLD light source, an optical fiber re, an integrated optical phase modulator, an optical fiber coupler and a photodetector; 5) The circuit comprises a light source driving circuit and a detection and control signal circuit board...

Brand Name:AIXTON/OEM

Model Number:AXT-CTPLC-8

Place of Origin:CHINA

Fiber optical communication connector Insert type fiber optic splitter cassette 1x8 plc splitter Overview Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Features 1. Low Insertion loss 2. Low PDL 3. Compact Design 4. Good channel-to-channel...

Brand Name:JINPAT

Model Number:LPC-1F1202

Place of Origin:China

LPC-1F1202 has 1 optical channel and 12 power channels. It is a slip ring model that can function smoothly in harsh environments with no contact, no friction and therefore attain a super long product life. Hybrid transmission of various signals(video, ...

Brand Name:J&K

Model Number:Fiber Optic 1X8 PLC Splitter

Place of Origin:SHENZHEN,CHINA

... fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel to channel niformity, and is widely used in PON(EPON/GPON) networks to realize optical signal power splitting.

Brand Name:GEZHI or OEM

Model Number:GZ-FSW-1x32

Place of Origin:China

...Fiber Optic 1x32 Switch The SM fiber Optic 1x32 Switch from GEZHI Photonics Co.,Ltd provides channel selection between a single input and N output fibers. The output channel number is customer specified and it can be 1x8, 1x16, 1x32 or others. It comes with the paralled interface (TTL) and drive circuit breakdown self-checking function. This 1x32 optical switch can be OEM. Its is based on our advanced fiber optics...

Brand Name:New Light

Model Number:LC / FC / SC / FC

Place of Origin:China

...fiber optic splitter SC / LC / FC optical fiber 1×N PLC Splitter Description Product Description Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in FTTX PON to realize optical...

Brand Name:Takfly/OEM

Model Number:DF-PLC-2 LGX Box

Place of Origin:Shenzhen, China

...Fiber Optical PLC Splitter Fiber Optic PLC Splitter Description: 1.Planar lightwave circuit plc splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. 2.It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical...

Brand Name:Begate or Customizes

Model Number:1X4 1X8 1X32 Steel Tube Without Connector

Place of Origin:Made in China

...Fiber Optic PLC Splitter 1X4 1X8 1X16 1X32 1X64 Without Connector Product Descriptions of Fiber Optic PLC Splitter: 1. Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. 2. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical