74avc1t1022dpj signal driver

Model Number:74AVC1T1022DPJ

Clock Fanout Buffer (Distribution) IC 1:4 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Categories:Clock Buffers, Drivers

Country/Region:china

Clock Fanout Buffer (Distribution) IC 1:4 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Categories:Clock Buffers, Drivers

Country/Region:china

Clock Fanout Buffer (Distribution) IC 1:4 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Categories:Clock Buffers, Drivers

Country/Region:china

Clock Fanout Buffer (Distribution) IC 1:4 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Categories:Clock Buffers, Drivers

Country/Region:china

Clock Fanout Buffer (Distribution) IC 1:4 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)

Brand Name:Bextreme Shell

Model Number:DH-BLD6010TD

Place of Origin:China

...DRIVER WORKING VOLTAGE 11.5-70VDC CAN BE CONFIGURATED BY SERIAL PORT AND CAN COMPATIBLE WITH HALL/NO HALL SENSOR MOTOR WORKING MODE The driver can work in two working modes, Hall and Hall, during the driver power-on, the driver detects the Hall signal, if the Hall signal is not connected, or the Hall signal is faulty, the driver...

Brand Name:TOSHIBA

Model Number:TB6612FNG

Place of Origin:Original Factory

...input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a

Brand Name:Leisiure Auto

Model Number:LS-803

Place of Origin:China

Driver fatigue monitor with signal output 45km/h start-up speed Description Driver Fatigue Signals or Images Output Driver Fatigue Monitor system LS-803 can connect with customer’s AVL/GPS system and send the fatigue signals or images to fleet management center so that the supervisor can know the driver’s real time situation and take action in time for a better fleet safety management. Vibration Cushion Alarm Driver...

Brand Name:Jkongmotor

Model Number:JKD5056S

Place of Origin:Jiangsu, China (Mainland)

...Driver JKD5056S For Nema23 Stepper Motor 1. Electrical indicators of NEMA23 stepper motor driver Instruction JKD5056S Minimum Typical Maximum Unit The output current 0.1 - 5.0 A Input voltage 24 36 50 VDC Control signal input current 6 10 16 mA Control signal interface level 4.5 5 28 Vdc Input signal...

Brand Name:Coolmay

Model Number:SM3U-2Z

Place of Origin:shenzhen china

...drivers, featuring DC24V/2A operation, 12DI14DO configuration, and RS232/RS485 communication. Technical Specifications Parameter Specification Model SM3U-2Z Pulse Frequency 200kHz (default) Operating Voltage DC24V/2A Digital I/O Signals 12DI14DO Analog Input Signals...

Place of Origin:Beijing China

Brand Name:power-sem

Model Number:PSPC412-62A422

...;Driver core can carry 1DI825 drive to 50 KHZ frequency drive a FZ600R12KS4; It has a variety of control signal interface to choose from: electrical interface;Fiber optic signal interface;422 differential signal interface;With prompt model and used for

Brand Name:JUYI

Model Number:JYQD-V8.8D

Place of Origin:China

... frequency:1-20KHZ; Duty cycle 0-100% Analog voltage speed regulation :0-5V O.V / L.V protection :YES Speed pulse signal output: YES Wiring diagram 5V -----Driver board internal output voltage M ---- Motor speed pulse signal output port, 5V pulse signal.

Brand Name:YZY

Model Number:YB050WVR-P01

Place of Origin:Guangdong, China

... The YB050WVR-P01 is a 5-inch LCD monitor driver board from Shenzhen Yingzhanying Technology Co.,Ltd, supporting 800×480 resolution. It features HDMI signal input (via CN1 interface) and multi-point capacitive touch—with J4 6Pin FPC touch interface and

Brand Name:VIC-TECH

Model Number:SWT-201M

Place of Origin:Jiangsu, China (Mainland)

...driver for 4 wires permanent magnet steper motor and hybrid motor SWT-201M driver drives two-phase stepping motor. The driver adopts imported module to realize high frequency chopping and constant current drive. It has strong anti-interference, high frequency performance, high starting frequency, control signal and internal signal...

Brand Name:Merrytek

Model Number:MC002D6

Place of Origin:China

12v DC Microwave Motion senosr MC002D6 for 5vdc Signal Output, Long Detection Range To 12m Description: MC002D6 is a DC input microwave motion sensor, will output 5vdc signal output . it is a compact sensor module for unival match ,with high-low voltage ...

Brand Name:LAXTHON

Model Number:T20-3156-22SMD 3030

Place of Origin:CHINA

... driver Application Back-up light,Turn light Advantage: 1. High quality 3030 SMD led chip, 2. Constant current IC driver , super canbus function 3. can used for turn light Q1. Is this led light universal type? A1. Yes, it's plug&play ...

Brand Name:mankun

Model Number:Constant pressure

Place of Origin:Guangdong, China

... unit, designed for single color and constant voltage LED light. It can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the

Brand Name:ONSEMI

Model Number:SN74LS240N

Place of Origin:Original

SN74LS240N LOW POWER SCHOTTKY Signal Schottky diode Schottky Barrier Diode The SN74LS240 and SN74LS244 are Octal Buffers and Line Drivers designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers which provide...

Brand Name:JUYI

Model Number:JYQD-V6.7

Place of Origin:China

... speed control PWM frequency:1-20KHZ; Duty cycle 0-100% Analog voltage speed regulation 0-5V Speed pulse signal output YES Application notes: 1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as

Brand Name:JIUQI

Model Number:JQ-201SD

Place of Origin:Jiangsu, China (Mainland)

...Driver Stepper Motor Controller For NEMA 8 NEMA 17 NEMA 23 Motor 1. Description: This is a two-phase stepping motor driver. It adopts imported module to realize high frequency chopping and constant current drive.In the meanlwhile it has strong anti-interference, high frequency performance, high starting frequency, control signal and internal signal...