50mm eddy current metal detector

Place of Origin:XIAMEN,china

Brand Name:COBE

Off-line eddy current testing system intro This off-line eddy currment detecting equlipment is used in high accuracy flaw testing for workplece that already be finished. Automatic testing procedure: Using up-loading system, via roller way, the workpiece...

Brand Name:HUATEC

Model Number:HEF-600 Series

Place of Origin:CHINA

Dual frequency Eddy Current Flaw Detector Detect Metal Defects in Metallic Material HUATEC HEF-600 series are a new Eddy Current Flaw detector from our company, it is an instrument which has integrated four function as conventional eddy current, magnetic ...

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:FET-99E

Place of Origin:China

... detection of metal parts such as metal pipe, bar, wire, wire and auto parts, and can be used for automatic flaw detection of other mechanical parts. It has a relatively independent test channel, which can drive the ...

Brand Name:HUATEC

Model Number:HEF-24ET

Place of Origin:China

...Eddy Current Flaw Detector HEF-24ET General introduction The intelligent multi-frequency eddy current detector is a new generation of eddy current nondestructive testing equipment. With the adoption of the most advanced digital electronic technology, multi-frequency eddy current...

Brand Name:Mitech

Model Number:Mitech MET Series Portable Eddy Current Flaw Detector

Place of Origin:China

...Eddy Current Flaw Detector intelligent, portable, multi-frequency Working Principle The eddy current detection technique is based on the principle of electromagnetic induction, and the excitation signal is loaded into the probe coil. When the probe is close to the metal surface, the alternating magnetic field around the coil will generate the induced current on the metal surface.For flat metal...

Brand Name:TMTeck

Model Number:TMD-302

Place of Origin:China

Digital Eddy Current Detector Eddy current signal time base scanning curve display Technical Parameters Basic Specification Operation interface Touch Screen, Shuttle ...

Brand Name:AJR NDT

Model Number:AEC-610

AJR NDT AEC-610 Portable Eddy Current Flaw Detector Introduction It has been proved by research that, operate smart keyboards with thumb is much easier than with other fingers because it has less joints. AEC-610 takes this advantage to realize one-finger ...

Brand Name:Wuxi Sylaith

Model Number:DIN1629

Place of Origin:China

DIN1629 BK NBK GBK / St37 / St44 Seamless Steel Tubes Eddy Current Flaw Detectors We exported 1500~2500 Tons each month St37 St44 St52 Seamless steel tubes to global markets, our clients in America and ...

Brand Name:Xrido

Model Number:Customizable

Aluminium Copper Recycling Separation Machine Eddy Current Separator Scrap Metal Non Ferrous Sorting Recycling Machines #detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:...

Brand Name:SHANAN

Model Number:VMD series

Place of Origin:CHINA

Industrial Free Fall Gravity Metal Detector Separator For PVC Material Features of properties: 1. Collection of detection coil, controller, separation device. Easy to operate and install. 2. It can save losses of material, because rejection board rapidly ...

Brand Name:HTTS

Model Number:ECM-01

Place of Origin:CHINA

Eddy Current Displacement Sensor For Mechanical Displacement & Vibration Measuring INTRODUCTION Eddy current displacement sensor is an non-contact sensor that against on the principle of eddy current effect. It is used for measuring the size, vibration...

Brand Name:TONTEN

Model Number:TT-E600

Place of Origin:China

...generate induced current in a high-frequency alternating magnetic field. When the eddy current sorting machine works, it generates a high-frequency alternating strong magnetic field on the surface of the sorting magnetic roller. When the metal enters the

Brand Name:True Engin

Model Number:ZA-5Y

Place of Origin:China,Hubei

... control, overload protector, torque loader, such as printing machine, paper making machine, re-reeling machine, wire drawing machine, metal calender, film processor, textile machine etc.; or the loading device when doing

Brand Name:ZL

Model Number:ZL-4002

Place of Origin:CHINA

50mm Detection Sensitivity Pipe Metal Detector for Food & Chemical Industries This advanced pipe metal detector is specifically designed for detecting metallic contaminants in liquid and paste materials within food, chemical, and pharmaceutical processing...

Brand Name:UNIQSCAN

Model Number:GC1001

Place of Origin:SHENZHEN,CHINA

...metal detector Description: 1.Technical specifications : 2.Power voltage: standard 9V battery 3.Operating voltage: 7V-9V 4.Operating Current: <50mA 5.Alarm terms: sound (vibration) and light alarm simultaneously 6.Waterproof: IP31 7.Alarm Sound: ≥75dB(A) 8.Operation Frequency: 40KHz 9.Housing material: ABS- black 10.High Sensitivity:Pin: 30-60mm 64-Pistol : 180-195mm; 11.High sensetivity:P i n : 30-50mm

Brand Name:SECUERA

Model Number:SE-1200

Place of Origin:China

...℃~+45℃ Gross Weight 90kg Outer frame 2220mm (h) x 820mm (w) X 522mm (d) Inner frame 2000mm (h) X 700mm (w) X 522mm (d) security metal detector door Characteristic Two LED light bars on both door panels: gives alarm corresponding to

Categories:Underground metal detector

Country/Region:china

...Metal detection series > Underground metal detector PrevNext GC-1008 Underground gold metal detector INQUIRY Description Working current current:≤30 mA,Max≤45 mA Frenquecy:15 KHz±2 KHz Voltage:12-18 V Weight:2.0Kg(exclude battery) Temperature:0~+40°C Size Dia:20.5cm,thicknes:s 2.5cm Battery six: / 1.5V GC1008 handheld metal detector using high power transmission, automatic tracking system, is special detector...

Place of Origin:CHINA

Brand Name:ABNM

Model Number:MD3003B1

... or vibration alarm. Power supply: 9 volt battery box (6F22ND battery), external charger function (charger optional) Static current: less than 7mA Current job: sound and light less than 47mA, vibration: 103mA Operating temperature:

Brand Name:L&D

Model Number:TG-500

Place of Origin:china

... ±1～3%N or 2.5μm Minimum work piece diameter F: convex 1.5mm/0.06", concave 25mm/0.98" NF: convex 3mm/0.12", concave 50mm/1.97" Minimum measuring area ￠6mm/0.24" Minimum sample thickness 0.3mm/0.012" Power supply 4×1