40db fixed coaxial attenuator

Brand Name:Vinncom

Model Number:VN-AT-40G-50W-2.92mm

Place of Origin:China

...Attenuator Part Number VN-AT-40G-50W-2.92mm Operating Frequency DC-40 GHZ VSWR ≦1.6 Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 50W Interface 2.92mm Male-2.92mm Female Operating Temperature ( ℃ ) -55~+100℃ Attenuation(dB) 20 30 40 Attenuation Accuracy -3.0/+5.0dB (20dB) ±3.0dB (30, 40dB...

Model Number:ZSJXX-200SNF-xT

Place of Origin:Chengdu,China

Brand Name:Zysen

...Fixed Coaxial Attenuators Zysen's 200W attenuators available with DC-3GHz, DC-6GHz, DC-12.4GHz, DC-18GHz, 50 impedance & SMA, N Female/Male connectors. Available with 6, 10, 20 , 30dB&40dB to 50dB, 60dB attenutation. Electrical Specifications Frequency Range DC – 4GHz Power 200W CW @ 25ºC Attenuation 10~20dB 30~40dB 50~60dB Attenuation...

Brand Name:Vinncom

Model Number:VN-AT-26G-2W-SMA

Place of Origin:China

DC-26GHz 2W SMA Male-SMA Female 40-90dB Attenuator Wide working frequency range Low standing wave High attenuation accuracy Part Number VN-AT-26G-2W-SMA Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection ...

Brand Name:ZD

Place of Origin:China

Model Number:zd-att-10n

DC - 3GHz 3dB 50 ohm 10W N Male N Female RF Coaxial fixed Attenuators Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or ...

Place of Origin:China

Features: ★Wide frequency band, wide coverage ★PIM optimized design. ★Ideal for all kind of DAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-3800 VSWR ≤ 1.25 ...

Brand Name:YLT

Model Number:Attenuators

Place of Origin:China

... accompany with small power meter, comprehensive tester or spectrum analyzer. Model Power Rating(W) Frequency(GHz) Max VSWR Attenuation (dB)

Brand Name:SWT

Model Number:SW-2.92TS100

Place of Origin:China

100 W Coaxial Fixed Attenuators DC-26.5 GHz Connector 2.92 mm Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the power ...

Brand Name:ANC

Model Number:Collimator Variable Attenuator

Place of Origin:China

...Attenuator With LC Connectors Description 0.8~40dB MM 50/125 or 62.5/125 In-line Variable Optical Attenuator manufactured by ANC International Co., Limited uses collimator lens technology enabling the user to change attenuation through the twist of a top-mounted screw. This variable attenuator...

Brand Name:Takfly/OEM

Model Number:SC

Place of Origin:Shenzhen, China

...Attenuator Product Name: 1 to 20 dB SC Fixed SM APC and UPC Male To Female Metal Fiber Optic Attenuator Fiber Optic Attenuator Description: An SC fixed male to female attenuator is a passive device used to reduce the intensity of optical signal without significantly changing the transmission wavelength. It is a male-to-female connector and fixed-type attenuator. the attenuation...

Brand Name:CY COM

Model Number:SC/APC

Place of Origin:Shenzhen China

...Fixed Optical Attenuator 1-30db SC APC green color single mode Fixed Type Fiber Optic Attenuator Product Description * High power 1W continuous operation tested over 1000 hours * Precise attenuation * Return loss UPC >50 dB APC >60 dB * Low ripple broadband design for operation at both 1310 and 1550 nm * Attenuation range for SC, FC, and LC types 1 to 13 dB in 1 dB increments, 15 dB, and 20 dB Features : Fixed

Brand Name:TTI Fiber

Model Number:001

Place of Origin:China

...,LC,FC,ST,MU Optional Mode: Singlemode, Multimode Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Attenuators are also used to balance out transmission lines that otherwise would have unequal signal levels. Features: Complied with

Brand Name:GEEHE

Model Number:GH-AT-SM-001

Place of Origin:Hubei,China

... attenuation values are available in 1dB increments from 1 to 20dB. This Fixed Optic Attenuator 10 dB (Low Polarization FC APC) is a passive device mainly used to reduce the amplitude of a light signal without any significant ...

Brand Name:KEXINT

Model Number:SC FC Male To Female Fixed Fiber Attenuator

Place of Origin:CHINA

...Fixed Optical Attenuator Low PDL FTTX Network Telecommunciation Product introduction Attenuator optic attenuator is a precise device that can provide different attenuation for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation...

Brand Name:Begate，or Custom

Model Number:12dB LC Apc UPC Fixed Optical Attenuator

Place of Origin:Shenzhen, China

...Fixed Optical Attenuator Single Mode Fiber Optic Attenuator Product Introduction of Fiber Optic Attenuator: Fiber optic attenuators are devices that reduce (attenuate) the strength of a fiber optic signal within a fiber-optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. Sometimes attenuators...

Brand Name:CFO

Model Number:fiber optic attenuator

Place of Origin:China

Fixed Optical Attenuator Male To Female , SCAPC / SCUPC Optical Fiber Attenuator 1. Features High return loss fiber optic attenuator Max operation power(1W) Low wavelength relativity fiber optic attenuator Low polarization related loss fiber optic attenuator...

Brand Name:FOCC

Model Number:FOCC - ATT010

Place of Origin:China

...Fixed Optical Attenuator with 1dB 30dB 50dB Step Our MU Fixed-Type Optical Attenuator with doped fiber ranges from 1 to 20dB attenuation with 1dB step, and 25dB and 30dB, with low tolerance. This attenuator can accommodate up to 200mw high power, with 50dB or more typical return loss. The FOCC MU attenuator is available for single-mode only, with wavelengths ranging from 1310nm to 1550um. In addition, our MU fixed

Brand Name:KCO, Kocent Optec Limited

Model Number:ATT-FIX-LCU-7

Place of Origin:Guangdong, China

7DB Fiber Optic Attenuator , LC Male To Female Fixed Optical Attenuator Quick detail: - Model Number: Fixed type LC/UPC - Mode: Single mode - Model Name: Male to female - Material: Plastic - Dusty cap color: Blue - Attenuation range: 7 dB Features: - High ...

Brand Name:YT

Place of Origin:china shenzhen

...Fixed 100W Variable Optical Attenuator Black color Variable Optical MU SM Plug-in Fixed 100W Attenuator Fiber Optic Attenuator Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation...

Brand Name:SUNET

Model Number:SUNET-19

Place of Origin:China

...Attenuator LC/UPC Fixed Flange Attenuator Describtion The fixed fiber attenuator is made from standard high precision dust blue. It is used in various optical fiber transmission lines with high attenuation precision and stable and reliable performance. Performance characteristics are independent of wavelength variations and enable dual functions of the adapter and attenuator. Attenuation...

Brand Name:New Light

Model Number:FC / ST / LC / SC / MPO

Place of Origin:China

...FTTX. The LC (20dB) attenuator is designed for optical hardware to reduce the (dB )power. They are designed to give the accurate attenuation required by the connected device and are available in a wide range of attenuation levels. The LC Attenuator will