2p solid carbide taps

Brand Name:Betalent

Model Number:Forming roll tap with male center

Place of Origin:Xiamen,China

... thread. Forming is a chip free tapping technology, especially suitable for tapping copper alloy and aluminum alloy with low strength and good plasticity, and materials with low hardness and high plasticity, such as stainless steel and ...

Brand Name:AMG

Place of Origin:CHINA

...Solid Carbide Thread Straight Flute Forming Taps With TiN Coating Introduction: AMG's solid carbide straight flute forming taps are high-performance threading tools designed for precision thread forming (cold forming) in a variety of materials, including stainless steel, aluminum, and other tough alloys. These taps...

Brand Name:BABOS

Model Number:STM10*1.2510001804T-Carbide

Place of Origin:China

... for drilling and forming holes in tough materials. Just be sure to handle it with care to avoid any accidents or damage to the tool. Features: Product Name: Carbide Machine Tap Surface Treatment:

Brand Name:Hanyuhaoyang

Model Number:HYM6.0*1 6HX

Place of Origin:China

Solid Carbide Extrusion Tap, Precision CNC Cutting Tool, HYM3.0×0.5 RH6-B,HYM5.0*0.8 RH6-B Applicable Materials: Aluminum alloy, low-carbon steel, copper alloy, stainless steel Not Applicable: Cast iron, carbide, and other brittle materials An extrusion tap...

Brand Name:TS

Model Number:M3M4M6M8M10M12M14M16M

Place of Origin:CHINA

... speed steel. The good design and the smoothy surface of the chip groove is very efficient for chip removing. Product Name: Carbide Machine Taps Material: Tungsten Carbide Coated: Coated Or Non Coating Application: Steel Or Aluminum Flutes: 4 Flute Dia.:

Brand Name:zhenfang

Model Number:ZF-TCR195

Place of Origin:Zhuzhou,China

HIP Sintered 10% Cobalt Solid Carbide Rods For Cutting Aluminum Alloy We can supply all kinds of dimensions solid carbide rods with fine&sub micron grain size,which applied to making reamers,taps,end mills & PCB tools.The carbide rods be widely used in ...

Brand Name:MMM

Model Number:Thread Milling

Place of Origin:CHINA

Solid Carbide End Mills for Thread Milling with High Productivity / Excellent Thread Quality Feature Advantage: In non-rotating parts, thread milling is a good alternative to tapping and can also be used instead of thread turning. With a thread milling ...

Brand Name:Sanxin

Place of Origin:China

Model Number:SX2331

... exceptional durability, precision, and resistance to wear. Made from high-quality tungsten carbide, this carbide tap is ideal for use in a variety of industrial and laboratory settings where precise and consistent stirring is critical. Key Features 1

Brand Name:AOJIA

Place of Origin:CHINA

... tools, boring tools, drills, reamers, broaches, taps, thread combs, rolling heads, milling cutters, forming tools, gear hob and gear shapers, etc. A coating process is used to ...

Brand Name:BETOP

Model Number:SC023013U

Place of Origin:PRC

... Technical Information: Solid carbide up cut spiral cutters would provide the best edge quality and cuts at fasted rate than any other types of routing tools. Industrial grades of solid carbide will be used according to the different application needs.

Brand Name:ZCCCT

Model Number:GM-4E-D8.0

Place of Origin:Zhuzhou

...solid carbide end mill, Tungsten carbide products Model Number: GM-4E-D8.0 1. Solid carbide end mill are suitable for Mold steel,Tool steel,Stainless steel,Cast iron . 2. Improve wear condition and improve tool life. 3.ISO application area.Stability and security of carbide turning inserts are in productive turning. 4. Excellent surface quality of workpiece . ZCCCT Solid carbide...

Brand Name:VKD

Place of Origin:zhuzhou

Model Number:Standard Size

...Solid Carbide End Mills / Solid Carbide Thread Mills HRC 60/65/68​ Features: Suitable for rough milling, semi-finishing and finishing of stainless steel (<280HB). Design for the small depth/large width in face milling, large depth/small width in side milling, less than 0.3D in shallow slotting. Water soluable or oil based are the best cooling methods. Square/flat end mill specification SQUARE/FLAT End Mills offered are solid carbide

Brand Name:RLD Tools

Model Number:HRC55

Place of Origin:China

...Solid Carbide End Mill Cutter for Steel 12mm Carbide End Mill The 4 flutes solid carbide end mill is made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge that is ground in the middle for direct immersion in the workpiece, which means that annoying pre-drilling is no longer necessary. Product name RLD HRC55 8mm Carbide...

Brand Name:Worldia

Model Number:Customized

Place of Origin:Beijing, China

Carbide Ball End Mill Solid Carbide Cutting Tools for high precision cutting DESCRIPTION According to customer needs, we can use our proprietary tool research and development technology experience to conduct unique research and development in terms of tool material selection, tool geometry design, passivation polishing technology, coating technology, etc. Developed solid carbide...

Brand Name:Drow

Model Number:Saw Blades for Stainless Steel

Place of Origin:Dongguan,China

...Carbide Round Saw Blades For Stainless Steel Application Field: Tungsten solid carbide saw blades with its high wear resistance are widely used in cutting, grooving and milling, involving in parts manufacturing, mold industry, 3C communication, automotive industry, aerospace, medical machinery etc. For safety and reliability, solid carbide...

Brand Name:JT

Model Number:JTS4

Place of Origin:China

...Solid Carbide End Mill Flat End Mill Description Tungsten Solid Carbide Square Flat End Mill has relatively higher hardness, stronger cutting ability, and can improve the speed and feed rate as well as increasing productivity.Tungsten Solid Carbide Square Flat End Mill is used for milling, with one or more of the rotary tool cutter.The margin in workpiece is cut by the mill intermittently. Carbide...

Brand Name:Joeben

Model Number:SCR08

Place of Origin:ShenZhen

Solid Carbide Reamers The World's Fastest Reamer For Oil And Water Drilling Tungsten steel is also known as cemented carbide is a powder metallurgy product mainly composed of hard phase and bonding phase. The main carbides include: tungsten carbide (WC), titanium carbide, tantalum carbide and niobium carbide...

Brand Name:SATRRY OR OEM

Model Number:NO1-1-1/2

Place of Origin:JIANG SU CHINA

1. Detail: Hand taps is used for tapping blind holes. Suitable for unalloyed and low-alloyed steels with resistance 900 N/mm2, cast, NE-metals, zinc, magnesium alloys and thermoplastic metals. 2. Size: Size Overall Length Thread Length NO.1-64 36 13 NO.2-...

Place of Origin:Hunan, China

Brand Name:Eagle

...Solid Carbide Diameter: 1.0-20.0 Type: End Mill Coating: TiAIN Overall Length: 50-100 The Processing Materials HRC: 45° , 55° , 60° Type1: Flattened Type2: Ball nose Type3: Taper neck ball nose end mill Type4: Radius end mill Type5: High-feed-rate carbide end mill Type6: Corrugated edge end mill Type7: Tiny head flattened Type8: Long neck flattened Type9: Long neck ball nose carbide solid...