20000psi kill manifold

Brand Name:Hebei Pantu

Model Number:YG140

Place of Origin:China

... for cleaning the well up and facilities to install and change choke of fixed sizes for more accurate flow control during main good flow periods. Choke Kill Manifold Parameter Type Working pressure Main bore dia By-pass dia.

Place of Origin:CHINA

... of check valves, gate valves, line pipes, pressure gauges. In case of increase in well head pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can

Brand Name:TR Solids Control

Model Number:JG/S2-35 JG/SY-35 JG/SY2-70 JG/S2Y2-105 YG-35 YG-70 YG-105

Place of Origin:Xi'an China

Kill Manifolds Introduction Kill manifolds are used to forcibly inject heavy drilling fluid, fresh water and fire extinguishing agent into the well to carry out well-kill operation, prevent well kick, blowout or fire, and fire suppression operation after fired. It can be open flowed through flow out pipeline directly to release bottom pressure of the well. Technical Parameters Working Pressure: 35~140MPa(5000~20000PSI...

Brand Name:SHRT

Model Number:Kill Manifold

Place of Origin:SHANGHAI IN CHINA

Kill manifold is a key part in the control devices of oil/gas well,which has the function that,as the drilling string can not be used for normal operation,the kill manifold shall be used to pump drilling fluid into the well so as to control the downhole pressure,one end of the kill manifold shall be connected with the side hole of drilling spool and teh other end shall be connected with the mud pump. Main technical parameters Name Choke manifold

Model Number:1" - 4" Swivel Joint

Place of Origin:China

... and their repair kits are available, suitable for normal or low temperature, or H2S environments, with sizes ranging from 1" to 4" and rated WP ranging from 2000psi~20000psi (14MPa~

Brand Name:JC Wellhead

Model Number:2" x 5000 psi Choke and Kill manifold

Place of Origin:China

...Kill Manifold For Oil Well Flow Control with API 6A Valves The chock manifold and the kill manifold are important well flow control equipment for down-hole operation, The design and the manufacture of the choke and kill manifolds conform to API16C standard. The choke manifold and kill manifold is used to carry out near balance drilling. During drilling, the choke manifold and kill manifold...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Kill Manifold

Place of Origin:China

... the risk of fire. Kill manifolds are used to forcibly inject heavy drilling fluid, fresh water and fire extinguishing agent into the well to carry out well-kill operation, prevent well kick, blowout or fire, and fire suppression operation after fired. It

Brand Name:HUIFENG

Place of Origin:CHINA

52～130mm Drilling Manifold 3000psi～20000psi Product Introduction Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

... circulation and bleed by opening and closing the gate valve of the manifold or adjusting the choke valve. It also can adjust the pressure between the bit pressure and the casing. They are the tools used for the balance-drilling or the unbalance-drilling.

Brand Name:CCSC

Model Number:Kill Manifold

Place of Origin:China

... 6A&API 16C standards. They are specifically made for injecting heavy mud, water and extinguishant during drilling CCSC has many sizes and pressure ratings Kill manifolds used for drilling applications. Features On-site maintanence Flexible for

Brand Name:Zonco

Place of Origin:China

... to successfully control the kick and implement the pressure control technology of oil and gas wells. When a well kick or blowout occurs, use the valve in the choke manifold to open and close, control a certain back pressure to

Brand Name:CSPPM

Model Number:PPM-T293A

Place of Origin:China

5000/10000/20000 psi High accuracy Water Gas Oil Pressure Sensor Transducer ■ 4-20 mA, 2-wire Output ■ 0.25% Accuracy ■ Shock & Vibration Resistant ■ Zero & Span Adjustments ■ All-welded Construction Applications ■ Oil & Gas Drilling ■ Mud Pumps / Mud ...

Brand Name:CCSC

Model Number:CLAMP NO.1-NO.28

Place of Origin:China

API 16A Clamps are the parts which are often used in the wellhead system, manifold system and BOP system for hub connection. API 16A Clamp is designed and manufactured in accordance with API standard,we have all sizes and pressure ratings clamps used for ...

Brand Name:JiuBei

Place of Origin:China

... 2)Inner diameter: 2'~4' 3)Pressure: 5000psi~20000psi 4)the only one through API 16C in China (1) Applicability Commonly used in drilling,cementing,work over service as flexible connection for choke and kill manifold to transport water base mud or oil...

Brand Name:ET

Model Number:water suction and discharge rubber hose

Place of Origin:Shandong, China

...Commonly used in drilling, cementing, work over service as flexible connection for mud manifold, cement manifold, choke and kill manifold to transport water base mud or oil base mud, washing fluid at high pressure in large volumes yet flexible construction...

Brand Name:Topland

Model Number:820273

Place of Origin:China

... API 16C Choke and Kill Manifolds, 5. Drilling hose, hydraulic hose, high pressure union, kill & choke line hose, 6. Spare parts for oilfield equipment which are interchangeable with most of the well-known OEM equipment. TESCO Top Drive Spare Parts list...

Brand Name:ZS

Model Number:2000psi to 20000 pis

Place of Origin:China,Henan

... parts of the drilling equipment, ensuring the safety and smooth progress of drilling operations. 2. Drilling spool is the parts which are often used in the oilfield for wellhead extension, choke and kill manifold, etc. It is designed and

Brand Name:Royal Way

Model Number:Weco Hammerless Union Seals

Place of Origin:Shanghai, China

... conditions. These seals are widely used in high-pressure flowlines, choke and kill manifolds, drilling mud circulation systems, cementing operations, and fracturing equipment. Each seal is manufactured to provide a stable, fluid-tight connection that ...