1x2 fiber optic passive components

Brand Name:GEZHI or OEM

Model Number:GZ-1x1-13/15HH

Place of Origin:China

...Fiber Optic Switch Module 1x2 Optical Switches This Optical switch configurate by 1x2 type with Three fibers and two states which connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its working with Singlemode wavelength 1260~1650nm or Multimode 850/1310nm. This is using a opto-mechanical proprietary configuration and activated via an electrical control signal. GEZHI 1x2

Brand Name:DAWNERGY

Model Number:40+1CH Gaussian AAWG Spec

Place of Origin:CHINA

Product Description: Our Fiber Optic Passive Components offer a Non-Adjacent Channel Isolation of ≥30dB, ensuring that there is minimal interference between channels. This feature allows for reliable and high-quality ...

Place of Origin:China

Brand Name:DONGWE

Model Number:Protection Sleeve

... tubing and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Easily operating to the optical fiber during installation without damaging and clear sleeve make it

Brand Name:Wangtong

Model Number:SC Male to Female Fiber Optic Attenuator

Place of Origin:Guangdong, China (Mainland)

...Fiber optic attenuator 3/5/10/15/20 db Description Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system, debugging fiber optic instrument calibration correction, optical signal attenuation. And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical...

Place of Origin:CHINA

Brand Name:SKYLYNN or OEM, ODM

LC Fiber Optic Attenuator Description LC fiber optic attenuators are devices which reduce the strength of a fiber optic signal within a fiber optic network. Our attenuators are a very high quality design using doped fiber to attenuate the signal. Our ...

Brand Name:GaPho

Model Number:1XN Fiber Optic Switch

Place of Origin:China

16 Port Rack Mounted Switch 1XN Fiber Optic Switch / Features Low loss, high reliability The LCD screen visually displays the working light path Standard configuration RS232 serial port, Ethernet interface / Scope of application Fiber optic loop Automatic ...

Brand Name:Seacent

Model Number:1x2 micro type

Place of Origin:Guangdong , China

... an important role in passive optical network (EPON, GPON, BPON, FTTX, FTTH and so on) by allowing a single PON interface to be shared among many subscribers. To achieve this, it is designed to split an ...

Brand Name:KCO

Model Number:KCO-Mini-1x2-SCA-White-1.0

Place of Origin:Guangdong, China

...1x2 Fiber Optic Splitter PLC SC/APC 0.9mm 1.0m LSZH White Tube Description: - Fiber optic PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. - PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...

Brand Name:KCO, Kocent Optec Limited

Model Number:FBT-MM-3.0

Place of Origin:China

...1x2 Fiber Optic Fused Splitter MM FBT Coupler​ Quick informations: Name: FBT coupler Cable diameter: 2.0mm, 3.0mm Cable length: 1.0m Terminal connecter: FC, SC, LC or optional Rate: 10/90 or customer request Pack: ABS box Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical fiber...

Brand Name:New Light

Model Number:Mini Type

Place of Origin:China

...1x2 Fiber Optic Splitter, 1 in 2 out Mini Type PLC optical splitter device Fiber Optic Splitter​ Description This is a 1x2 mini type PLC splitter, one fiber in and two fibers out, we use the high quality stailess steel to make the tube. Mini Type PLC splitter is smaller in size and weight, also it's a kind of planar waveguide integrated optical...

Place of Origin:China

Brand Name:HTD

1X2 Fiber Optic Switch Non-Latching Module Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical...

Brand Name:Geehe Comm

Model Number:GH-FO-1×2

Place of Origin:Wuhan China

...1x2 Fiber Optic Coupler Optic Coupler Brief Introduces: 1x2 Polarization Maintaining (PM) fiber optic coupler is used for monitoring or splitting optical signals in Polarization Maintaining fiber. The coupling ratio from 1% to 99 %. Geehe as the No.2 fiber optic coupler manufacturer in Asian- Pacific region, has been proven advanced micro-optic...

Brand Name:yingda

Model Number:YDPLC-AM-102-FAFA-1515

Place of Origin:china

...1x2 Fiber Optic Plc Splitter 1x2 ABS PLC Optical Splitter Module FC/APC Single mode G657A1 LSZH 2.0mm Yellow Blister Pack 1X2 ABS SPLITTER is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical...

Brand Name:ANC

Model Number:1x2 Coupler

Place of Origin:China

1x2 Fiber Optic Splitter 1310nm 1490nm 1550nm Triple Window Coupler with SC/APC Connector Description 1x2 Single Mode 1310/1490/1550nm Triple Window Coupler manufactured by ANC International Co., Limited is mainly to distribute light from a main fiber into two or more fibers. Fused Biconical Taper (FBT) Splitter is made by wrapping two fiber cores together, putting tension on the optical fibers, and then heating the junction until the two fibers

Model Number:1x2 SC / UPC PLC Splitter

Place of Origin:China

...Fiber Optic Cable SC / UPC Connector PLC Splitter Insertion Loss< 3.6 DB Description: PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. Specifications: Port Configuration: 1*2 Operating Wavelength 1260-1650 Operating Temperature(℃) - 40 - +85 Fiber...

Brand Name:GEZHI or OEM

Model Number:GZ-Optical Switches

Place of Origin:China

...channels by redirecting an incoming optical signal into a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as

Brand Name:SLR

Model Number:SL-Plug In- PLC-1x2

Place of Origin:GUANGDONG CHINA

... the end users of the FTTx networks. It provides fast installation and low space requirement helping to alert the deployment of FTTs projects. Fiber pigtails for input and output can be directly connected with this passive component easily. PLC Splitter is

Brand Name:Begate

Model Number:1X2 mini steel type PLC splitter with SC APC

Place of Origin:Shenzhen, China

... optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a

Place of Origin:China

Brand Name:CY

...1x2 Fiber Optic Splitter for Network Redundancy 1x2 Fiber Optic Coupler without connectors, Steel Tube package, 0.9mm cable Optical Splitter/Coupler is an optical device that combines or splits power from optical fibers. It divides light from a single fiber into two or more fiber...

Brand Name:BT-PON

Model Number:LC-SC

Place of Origin:China

... and 64. And we produce 3 different type spliter PLC, such as micro tube, insert box type and ABS plastic box type. Optical splitter micro tube type refers to the port 0.9 mm slip-on fiber multi channel direct output with a compact design and easy to