1l min mask particle tester

Brand Name:Daxian

Model Number:DX2022

Place of Origin:China

.... Factory direct sales, mask inhalation and exhalation filter or filtration efficiency tester automated filter tester. Standards: NIOSH 42 CFR 84, EN 149 YY/T 2626-2019 respiratory protection products Technical Parameters: ...

Brand Name:HAIDA

Model Number:HD-W810-5

Place of Origin:Guangdong, China (Mainland)

...Min Mask Testing Equipment For Textiles Air Tightness Tester Technical Parameters Technical Index HD-W810-5 Pumping rate 0-10L / min ~ 100L / min, adjustable, standard 2 L / min. Air source professional-grade vacuum pump Micro Manometer range 0~2kPa, accuracy 1%, resolution 1Pa. Timing range 0-99.99, accuracy is 1%, resolution is 0.1S. Power supply AC220V, 50Hz Application The Air Tightness Tester...

Brand Name:GESTER

Model Number:GT-RA13

Place of Origin:China

Masks Clogging Tester GT-RA13 Product Introduction Application: The sample is surrounded by a known concentration of dolomite dust in air. Following the exposure, the breathing resistance and the filter penetration of the sample particle filtering half mask are measured. Standards: EN 149 section 8.10 Key Specification Model GT-RA13 Dust DRB 4/5 dolomite Dust Distributor Particle...

Brand Name:Great Win

Model Number:GW-104

Place of Origin:China

... masks, and it can also be used to determine the gas exchange pressure difference of other textile materials. Instrument characteristics: 1. Using a suction-type air source as the ...

Brand Name:HOOHA

Model Number:HH-14

Place of Origin:Guangdong

..., labor protection inspection centers, drug inspection centers, disease prevention and control centers, textile testing centers, hospitals, masks and respirator manufacturers. Applicable standards GB /

Brand Name:ZL

Model Number:ZL-5066

Place of Origin:China

... the filter material is tested according to international standards. The design structure of the whole tester is compact and light, and in the process of running the test, it only needs to provide additional suitable power and compressed air (no water,

Brand Name:KINGPO

Model Number:ZR - 1310

Place of Origin:China

... Mask Particle Filtration Efficiency Tester ZR-1310model Salt Aerosol Generator Product introduction ZR - 1310 salt aerosols generator is the use of collison nozzle will have a certain specific concentration NaCl solution after spray drying, particle ...

Brand Name:Sinuo

Model Number:SN122603

Place of Origin:China

...Mask Respiration Resistance Testing Equipment Respiration Resistance Face Mask Tester ±1000Pa 85±1L/ Min With Standard Test Head Model Product overview: The mask breathing resistance detector is used to measure the inhalation and exhalation resistance of the mask under specified conditions. It is applicable to carry out relevant testing and inspection of mask products for mask...

Brand Name:KERANG

Model Number:WDS-02E

Place of Origin:China

Medical Mask Tension Tester This product is widely used in the tensile, compression, bending and shear tests of metal and nonmetal materials. Equipped with various accessories, it can also be used for the mechanical property test of profiles and members...

Place of Origin:Guangdong, China

Brand Name:chaungying

Model Number:Kn95

#detail_decorate_root .magic-0{vertical-align:top}#detail_decorate_root .magic-1{vertical-align:top;display:block;padding-right:4px;box-sizing:border-box;padding-left:4px}#detail_decorate_root .magic-2{vertical-align:top;padding-bottom:4px;box-sizing:...

Brand Name:HOOHA

Model Number:ZY6014D

Place of Origin:Guangdong

GB / T8333 - 2008 Glow Wire Test Apparatus , ZY6017B - VB Rigid Foam Electrical Wire Tracer Scope of application: Rigid foam vertical combustion tester is used to evaluate the vertical combustion performance of hard foam plastics in laboratory conditions...

Place of Origin:China

Brand Name:CHENGFENG

Specification Filtration efficiency (0.001 ~ 99.999)% Resistance 0~2000Pa, accuracy 2% Test area 100 square centimeters Test Mode Initial Efficiency and Loading Efficiency Customer Photos 1. Unique selling point: 12 years of professional research and ...

Brand Name:SUJING

Model Number:SJPM-F006

Place of Origin:CHINA

..., one-time filtration efficiency and load filtration efficiency of various mask raw materials and masks. PFE filter tester meets: GB2626-2019 (Respiratory protection—non-powered air-purifying particle respirator) GB19083-2010 (Technical requirements for

Brand Name:lixian

Model Number:HZ-9502

Place of Origin:China

Medical Particle Filtration Efficiency Test Machine HZ-9502 Medical Particle Filtration Efficiency Test Machine HZ-9502 (PFE) is used for testing the filtration efficiency of particulate matter of melt blown fabric, daily protective masks and medical masks...

Brand Name:SANWOOD

Model Number:SM-4315E

Place of Origin:China

Particle Protective Performance Tester MODEL: SM4315E Particle Protective Performance Tester is used to test the protection performance of daily protective masks with different concentration of NaCl or Oil particles. The aerosol particles (Sodium Chloride or Paraffin oil) with certain concentration and particle...

Brand Name:kingpo

Model Number:KP-1002

Place of Origin:china

Respirator particle protection effect detector 1 Product introduction ZR - 1002 masks particle detector is protective effect on volume of 500 l self-purification test chamber was gb head mould, will be waiting for inspection masks worn on the head, by any ...

Brand Name:MCreat

Model Number:107

Place of Origin:China

...Atomization rate is about 0.4ml/min. Drive gas flow is about 4 to 8 L/min. Atomization particle . The star lumen tubing can ensure oxygen flow even if the tube is kinked, different length of the tubing is available. The product can be transparent green and

Brand Name:UC

Model Number:N 95

Place of Origin:China

...Mask -BFE > 95% -Face Mask N95 Medical Protective Face Mask -BFE > 95% -Face Mask Test flow rate: 85L / Min; mask example structure: spunbond + flame retardant filter cotton + electrostatic filter cotton + activated carbon layer + spunbond; The structure is generally: test substance: 0.3μm oily aerosol DOP or paraffin oil, Test substance:NaCl&DOP Particle size:0.3μm Test flow rate:85L/Min Medical Protective Face Mask

Brand Name:JD

Model Number:JD-KF30010

Place of Origin:Dongguan China

Use: Used for testing the particle filtration efficiency of daily protective masks and medical masks, as well as measuring the obstruction performance of ordinary fabrics and medical masks to the airflow with constant flow rate. It is applicable to medical...

Brand Name:Haida

Model Number:HD-W810-6

Place of Origin:China

...Tester For Mask Exhalation Valve APPLICATION The Air Tightness Tester is mainly used for air tightness testing of masks and respirators under specified conditions. Applicable to masks, respirators and breathing valve manufacturers, quality supervision, scientific research, wearing and other units. Standard:GB 2626-2019 Technical Parameters Pumping rate 0-10L / min ~ 100L / min, adjustable, standard 2 L / min...