15s cycle o ring assembling equipment

Brand Name:HengChao

Model Number:HC-MFQ-02

Place of Origin:Guangzhou, China

... production of Butyronitrile Rings, Silicone Rings, and Rubber Rings. It is designed to offer a fast and efficient production process, with 8-15s cycle time per piece and a production rate of 3600-6500 pieces per hour. The machine is also designed to be

Brand Name:Olang

Model Number:OL-16

Place of Origin:Foshan City ,China

...Ring Assembly Machine for Copper Press-Fit Fitting Sealing Ring Product characteristics: Consistent Quality: The equipment ensures uniformity in the assembly process, leading to consistent product quality with minimal variation between units. High-Speed Operation: Capable of operating at high speeds, enhancing production throughput and reducing cycle...

Place of Origin:Jiangsu, China (Mainland)

Brand Name:WONDERY

Model Number:THJ

Automatic Welding Ring to U-bend Assembly Machine Product Description The machine can continuously and automatically put the welding ring on the small U-bend. Type TH700 TH800 TH900 Copper Tube Outer diameter (mm) 7 7.94 9.52 Wall thickness (mm) 0.41, 0.5...

Place of Origin:Guangzhou, China

Brand Name:YICHENG

Model Number:M-660P

...Equipment The C-600 series dosing pump is designed to inject chemicals into piping systems. All models are equipped with a side mount mechanical flow rate adjustment knob. Optional on/off cycling timers are available. Product Featurs ☆ Double-ball ceramic check valves. ☆ PVDF(Kynar) valve assemblies. ☆ Viton O-rings...

Brand Name:SENCAN

Model Number:SC-PT-05

Place of Origin:China

...Equipped with two needle hoppers, storage capacity 200,000 needles, available 24 hours production. Assemble at an inclined angle to avoid needle tip damaging. Binding and tightening device in needle hoppers to avoid chaos of needles. Easy remove hopper lid, needles can be installed within 3 minutes. Production cycle 10-15s...

Model Number:K0380 K0384

Place of Origin:CHINA

...ring, armature assembly, armature spring, ferrule. The product is developed to be used in ambients with temperature range from –10°C to +80°C The K0380 plunger is normally equipped with NBR rubber seals. Other K0384 meterial is fluororubber. The armature assembly is designed for more than 50x106 cycles. Specifications: ...