14 2 density cemented carbide bushing

Brand Name:OEM

Model Number:custom

Place of Origin:China

...carbide bushings Tungsten Carbide bushings have the characters of high wear resistance, high corrosion resistance and good compressive properties.It's widely used in petrochemical industries and other industries which call for high properties of the mechanical parts. Product Description: customized cemented tungsten carbide sleeve bushing Chinese Grade ISO Chemical Composition Physical Mechanical Properties WC Co Density

Place of Origin:China

Products Description Product Paramenters Grade Composition(% in weight) Physical Properties Grain size(μm) Densityg/cm³(±0.1) HardnessHRA(±0.5) TRS Mpa(min) Porosity WC Ni Ti TaC A/B/C KD115/YG6X 93.5 6.0 - 0.5 14.90 93.0 2700 A02/B00/C00 0.6-0.8 KD335/...

Brand Name:ASEEDER

Model Number:BEARING-01224

Place of Origin:CHINA

...Density Carbide Bushing Sleeve Bearing 100% Tungsten 14.33-14.53 Carbide Bushing Sleeve Bearing Introduction 1. Tungsten Carbide Bearing Bushings have the characters of high wear resistance, high corrosion resistance and good compressive properties. 2. It's widely used in petrochemical industries and other industries which call for high properties of the bearing bushings or shaft sleeves. 3. Tungsten carbide...

Brand Name:OED or OEM

Model Number:Customized

Place of Origin:China

... oil repellent wells usually contain water, various gases, wax, sand and other highly corrosive substances required by oil wells. Recommened carbide grades for Oil/Gas wear parts: Cobalt Binder Grades Grade Binder (Wt %) Density (g/cm3)

Brand Name:KLT

Model Number:Wear Irregular Throttle Valve Parts

Place of Origin:Guanghan

... Strength g/cm3 (HV) (N/mm2) ≥ YG6 Balance 5.8～6.2 ≤0.5% 14.75～15.0 91.0～92.5 2000(2500) YG8 Balance 7.8～8.2 ≤1% 14.5～14.9 90.5～92.0 2100(2800) YG10 Balance 9.8～10.3 0% 14.2～14.6 89.0～91.0 2600(3200) YG13 Balance 12.7～13.2 ≤1%

Brand Name:OUQI

Model Number:Endmills blanks

Place of Origin:China

...Cemented carbide rods OD3.175 with one end chamfer Outer diameter: 3.175mm Length: 38.1mm Roughness: Ra 0.2 Chamfer one side: 0.5*45° Material: 6% Cobalt HV30 2050 Density 14.7 Grade Density T.R.S Hardness Properties & Applications g/cm3 N/mm2 HV30 YU06 14.7 3000 2050 Suitable for manufacturing milling cutters for machining PCB. It is also suitable for manufacturing various kinds of solid cemented carbide...

Brand Name:no

Model Number:various

Place of Origin:Zhuzhou, China

...carbide sealing rings / cemented carbide rollers with high wear resistance Grades recommended: Nickle binder grades Grade Density(g/cm³) Hardness(HRA) TRS(N/mm²) YN6 14.7 89.5 1460 YN6X 14.8 90.5 1400 YN6A 14.8 91 1480 YN8 14.6 88.5 1710 Cobalt binder grades Grade Density(g/cm³) Hardness(HRA) TRS(N/mm²) YG6 14.8 90 1520 YG6X 14.9 91 1450 YG6A 14.9 92 1540 YG8 14.7 89.5 1750 YG12 14.2 88 1810 YG15 14...

Brand Name:AOJIA

Model Number:Ø75×Ø25.4×4.0

Place of Origin:CHINA

...Cemented Carbide Knives SIZE: Ø75×Ø25.4×4.0 This is the detail picture, welcome to order! GRADES ISO CORRESPONDING WC% Co% Density g/cm3 Hardness HRA TRS N/mm2 WC grain size YG6X K10 94 6 14.90 92.5 >=3000 FINE GRAIN ZK10UF K05-K10 94 6 14.85 93.0 >=3500 ULTRA-FINE GRAIN ZK20UF K20-K30 92 8 14.65 92.6 >=3600 ULTRA-FINE GRAIN ZK30UF K30-K40 90 10 14...

Brand Name:xincheng

Model Number:CF12 CF25 CF812 CF312 CF608 CF406

Place of Origin:xiamen

Product Description: Our Cemented Carbide Rods are designed to be customized, making them a perfect fit for your specific needs. The flexibility in dimension ensures that you get precisely what you need for your application. Our Cemented Carbide Rods hav...

Brand Name:VKD

Place of Origin:zhuzhou

Model Number:Various

... Density(g/cm³) Hardness(HRA) TRS(N/mm²) YG6 14.8 90 1520 YG6X 14.9 91 1450 YG6A 14.9 92 1540 YG8 14.7 89.5 1750 YG12 14.2 88 1810 YG15 14 87 2050 YG20 13.5 95.5 2450 Nickle binder grades Grade Density(g

Brand Name:Sanxin

Place of Origin:China

Model Number:SX0049-2

...Cemented Carbide Tungsten Steel Strip for Exceptional Hardness and Durability Other Grade Density(g/cm3) Hardness(HRA) MPa KZ40C 13.30～13.45 87.0～88.0 ≥3000 KZ30A 14.03～14.17 88.0～89.0 ≥3000 KZ35 13.85～14.04 87.5～88.9 ≥2800 YG20 13.45～13.65 ≥84.5 ≥2480 YG15 13.95～14.15 ≥86.5 ≥2400 YG16C 13.75～13.95 ≥84.0 ≥2640 YG13C 14.15～14.35 ≥85.5 ≥2450 Introduction: Cemented carbide...

Brand Name:Santon

Model Number:Customized

Place of Origin:SICHUAN

... n/mm2 HRA YG6X K15 C3 14.9 1890 91.5 Fine grain WC alloy, wear resistance higher than YG6, strength close to YG6. Suitable for machining ...

Brand Name:BMR TOOLS

Model Number:cemented carbide rod

Place of Origin:P.R.China

...cemented carbide rod K10 solid tungsten carbide round bars Tungsten Solid Carbide Precision:H6 Ground surface finishing Package: PVC Bag and Plastic Tube available Polished bright ground carbide rod Element Cobalt 10% TSR 2800 Grain 0.8 Density 14.2 Mo 89% Cemented Carbide Rod Specification Size Length 3 100 4 100 5 100 6 100 8 100 10 100 12 100 14 100 16 100 18 100 20 100 6 150 8 150 10 150 12 150 14...

Brand Name:OEM

Model Number:customized

Place of Origin:Zhuzhou City, Hunan Province, China

Cemented Carbide Blanks Round Solid Carbide Bar With Two Helix Internal Coolant Holes Product Description The Tungsten Carbide Rods (Cemented Carbide Rods), are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer. Grade Grain size Cobalt Content (%) Density g/cm3 Hardness HRA TRS N/Mm2 YG8 Medium 8 14.7 89.5 2200 YL10.2 Extrafine 10 14.42 91.8 4000 UF06 Submicron 6 14

Brand Name:zhenfang

Model Number:ZF-TC2010

Place of Origin:Zhuzhou,China

....8HRA 3800-N/mm3 10mm(0/-0.011) 150mm other lengths according customer require Tungsten carbide rods produced with high temperature resistance and high hardness and toughness, widely used in PCB micro drills, for making drills, ...

Brand Name:JinTai Pai

Model Number:Customized size

Place of Origin:Hunan, China

Cemented Carbide Saw Tip Virgin Cemented Carbide Saw Tips For Cutting Hard Wood Products Description: 1. saw tips for cutting steel, wood 2. saw tip types over 100 types 3. Saw tips sample available 4. long life span 5.Tungsten carbide saw tips Products Specification: Grades for woodworking and aluminum (Professional Saw Blade) Grade Density (g/cm3) Hardness (HRA) TRS (Mpa) ISO JIC Standard JT201 14.95 91.2 2100 K25 C2 YT202 14...

Brand Name:XINPIN

Model Number:Csutomized type

Place of Origin:Zhuzhou, Hunan, China

... Standard g/cm3 HRA N/mm2 (MPa) XF8 14.5-14.7 93.0-93.2 2800 For Chipboard, HDF, MDF and laminatedboard etc K01 XF10 14.3-14.5 92.3-92.5 2700 For HDF, MDF and fiberwood etc K01 XK10 14.8-15.0 91.3-91.5 2900 For solidwood, plywood etc K05 XK20 14.6-14.8

Brand Name:Zhuzhou Shield

Place of Origin:Zhuzhou, China(Mainland)

Material: Carbide We manufacture the special shaped parts according to cutomer's drawing. Our service • ISO 9001-2008 Quality Control System . • 100% virgin tungsten carbide . • OEM,ODM project accepted . • All payment terms supported . • Fast delivery ...

Brand Name:ZONCO

Model Number:Customized

Place of Origin:Zhuzhou

High Precision Bushings, Tubes and Guides Pre-fabricated High Precision Bushings and Tubes in Steel and Tungsten Carbide Prefabricated Bushings and Tubes in Steel and Tungsten Carbide High precision hole polish Outer-Diameter and Length raw Material: Steel...