12mm diameter straight unjointed test finger

Brand Name:HongCe

Model Number:HT-I07

Place of Origin:China

...ough the tip of a straight unjointed test finger, test probe 11 of IEC 61032. This finger with an electrical indicator as described above is applied to all places where yielding of insulating material could impair the safety of the accessory, but is not

Brand Name:kingpo

Model Number:IEC61032 figure 7

Place of Origin:china

Test Probe 11 , IEC61032-figure 7 Test Finger Probe , Unjointed test finger According to IEC61032 figure 7 1,Knurled Finger Diameter:12mm 2,Knurled Finger Length:80mm 3,Dam- board Diameter:50mm 4, Dam- board Length:100mm 5.M6 thread at the end of the probe...

Brand Name:JLX

Model Number:LX-TB11

Place of Origin:Made in China

...Test Finger & Unjointed Test Finger is a precision test probe made according to Figure 2 (Test Probe B) and Figure 7 (Test Probe 11) of the IEC 61032 is used to simulate a human finger, used by the standards of IEC, CSA, IRAM, UL etc. 1) IEC Jointed Test Finger ( Test Probe B of IEC 61032) Test Probe Diameter: 12 mm Test Probe Length: 80 mm Baffle Plate Thickness: 20 mm Baffle Plate Diameter...

Brand Name:PEGO

Model Number:PG-TP11

Place of Origin:China

Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032 1. Introduction of Test Probe 11: The test probe 11 is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers. 2. Specification of Unjointed Test Finger Probe: diameter of test finger

Brand Name:HEJIN

Model Number:HT-I19

Place of Origin:CHINA

...Test Finger Probe 12mm Diameter & Dual Joint Design Product Description The HT-I19 Test Finger Probe is a precision safety testing tool engineered to simulate human finger contact for evaluating electrical equipment safety. Compliant with the IEC 61032 standard, this B-type test finger features a dual-joint design that mimics natural finger...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 ...

Brand Name:Lonroy

Place of Origin:China

Model Number:LR-G30

... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with

Brand Name:SHC

Model Number:SC-335F7

Place of Origin:China

...information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable components which are used for electric shocking water or ...

Brand Name:SKYLINE

Model Number:SL-S39

Place of Origin:CHINA

...: The round rods of the standard requirements are inserted into the gap of the toy to be tested. If it can be inserted, it is judged to be accessible. Standard test: EN71. Parameter: Specifications: diameter is 3mm, 5mm, 7mm, 12mm; tolerance: +-0.5mm.

Brand Name:KINGPO

Place of Origin:China

...Test Probe Pin Thorn Kit are the necessary items for household and similar electrical appliances anti-electric shock protection test. The test kit consists of : No. Item Name Stadanrd 1 Test Probe B IEC 61032 figure 2 2 Test Probe 13 IEC 61032 figure 9 3 Test Probe 41 IEC 61032 figure 16 1. Stadard Test Probe B HT-I02: Bending finger diameter :12mm...

Brand Name:perforated sheet

Model Number:XM

Place of Origin:CHINA

perforated metal sheets Specifications: hole diameter(size): 0.1mm--200mm; thickness: 0.1mm--12mm pitch:> = 0.2mm plate size :1000x2000mm,1250x2500mm,1220x2440mm,or other pattern type(Arrangement):45°,60°,straight or custom patterns. Material: iron, ...

Brand Name:ST KEY

Model Number:F/LER

Place of Origin:CHINA

...: Composition by Spectrometer; Size test,Mechanical test,NDT,UT,RT,PT,MT,ET,. Specification and parameter: 1) Roll diameter: up to Φ1000mm, 2) Roll length: up to 6000m; 3) Chrome plating thickness: 0.03-0.12mm 4) TIR on Straightness and concentricity: