10kn bending test apparatus

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

... of cord of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a weight having a mass of 0,5 kg. A current of about 0,1 A shall be passed through the conductors. The sample shall be bent backwards and forwards in a

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:AI

Model Number:AIBXW-16

Place of Origin:CHINA

...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

...Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus...

Brand Name:RECEN

Model Number:RC-TM-003

Place of Origin:China

... stretching, compression, bending, shearing and other tests. Applicable standards: meet relevant test standards such as GB / T228.1-2010, ISO, ASTM, etc. Features: 1. The testing machine adopts four-column, double-space frame structure, which has the

Brand Name:Infinity Machine

Model Number:RS-8018

Place of Origin:Made in China

... tensile test Metal/Plastic bending test Wire / sheet tensile / compression/tearing/bending test Scope: Tape, Automotive, ceramic, composite material, construction, medical/food equipment, metal, paper, plastic, rubber, textile, ...

Brand Name:Gaoxin

Model Number:GX-8007

Place of Origin:China

Testing Equipment For The 0.4KW 10KN Glass Bend Testing Machine With Special Jig Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramics, glass, timber. The bend testing can do test of central point bending and three-piont bending. It can automatically calculate the maximum test...

Brand Name:PERFECT

Model Number:PT-1166

Place of Origin:Guangdong,China

...Bending Testing Machine 10KN Tensile Press Flexural Tester 4 Points Bending Testing Machine Introduction : AC Servo Motor 3 Points Bending Testing Machine 10KN Tensile Press Flexural Tester is suitable for various materials,including finished articles and semi-finished articles. It can test tensile strength, tensile elongation, compression, bending...

Brand Name:PTE

Model Number:Electronic Tensile Peel Strength Test Equipment

Place of Origin:China

...Bending Test Machine mainly used for brick, stone, cement, concrete and other building materials, compressive strength test. Main performance technical specifications: Max load KN 300kN/10kN Test force measuring range KN 4%-100%FS Test Force showed the relative error ≤indicating value±1% Test Force Resolution 0.01kN Hydraulic pump rated pressure 25MPa Loading rate 0.3KN/S~10KN...

Brand Name:BOTO

Model Number:BT-10

Place of Origin:China

... according to ASTM, ISO, DIN, GB and other international standards. Applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It

Brand Name:Lonroy

Model Number:LR-Q002

Place of Origin:China

...Bending Testing Machine Flexible Tester Tensile Test Apparatus 1. Product Description The main design of this machine is to conduct repeated bending tests on FPC wiring, with certain speed, stroke, (angle), and count conditions for back-and-forth bending tests.The main design of this machine is composed of AC servo motor, imported linear slider, PLC program, touch screen, steel, etc. It is a professional testing...

Brand Name:ZL

Model Number:ZL-2431

Place of Origin:China

... and teaching experiments in colleges and universities. The instrument is a strain control type, which is used to measure the triaxial shear test of the strength and deformation characteristics of the soil sample with a maximum surrounding pressure of 1

Brand Name:REFOND

Model Number:RF-UD10K

Place of Origin:Shen Zhen, China (Mainland)

Textile Testing Equipment Universal Testing Machine 10KN Standards: ASTM D434 ASTM D1683 ASTM D2261 ASTM D2724 ASTM D3936 ASTM D4964 ASTM D5034 ...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...