1000mw optical variable attenuator

Brand Name:KCO, Kocent Optec Limited

Model Number:FC/APC

Place of Origin:Guangdong, China

Optical Variable Attenuator single mode Wave Length 1310nm - 1620nm Specifications: Return Loss UPC >55dB APC >65dB Attenuation Accuracy 1 ~ 7 dB ±0.5dB 8 ~ 12 dB ±0.7dB 13 ~ 17 dB ±1.0dB 18 ~ 25 dB ±1.3dB Maximum Optical Input Power 1000mW Polarization Dependent Loss ≤0.1dB Operating Temperature Range -40°C to 75°C Storage Temperature Range -40°C to 85°C Humidity 95%RH Attenuation...

Brand Name:YT

Model Number:SC APC Singlemode Fast Connector

Place of Origin:china shenzhen

... or male to female which is also called a plug fiber optic attenuator. Fiber optic attenuators can be designed to use with various kinds of fiber optic connectors. the attenuators can be female to female which is called bulkhead. fiber optic attenuator or

Brand Name:KEXINT

Model Number:Fiber optical attenuator

Place of Origin:CHINA

... for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under the

Brand Name:FOCABLE

Model Number:SC Variable Fiber Optic Attenuator

Place of Origin:China

...optical variable attenuator 0db to 25db / single mode fiber attenuator FOC COMMUNICATION CO., LTD provides a wide range of single mode and multimode variable adapter type optical attenuator. They have low return loss and works at both 1310nm and 1550nm wavelength range. FC Fiber connector types with PC or APC polish are available. Variable Adapter Type Optical Attenuator ( Variable Bulkhead type, Variable Female-Female Optical

Brand Name:New Light

Place of Origin:China

... model: SC/PC, UPC, APC * Operating wavelengths 1310 and 1550 (nm) * Attenuation 1~30 (dB) * Temperature range -40~+85 (DEG C) Description: Variable attenuator used in optical fiber transmission lines, continuous variable attenuation of light intensity, to

Brand Name:CY COM

Model Number:SC Female to male

Place of Origin:Shenzhen China

...Optical Variable Attenuator Introduction: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Features: Low back reflection and Low PDL High precision attenuation value Precision control of attenuation...

Brand Name:FURONG

Model Number:Fiber Optic Attenuator

Place of Origin:Guangdong, China

...Attenuator Optical Variable Attenuator Quick Detail: Name: SC Fiber attenuator Mode: Singlemode, Multimode PC, UPC, and APC polish types optional Type: Fixed, Female & male, In-line, Variable Attenuation value: 1dB~30dB Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Fiber Optic Attenuator...

Brand Name:Geehe or OEM

Model Number:Optical Pad Attenuator, Bulkhead Attenuator

Place of Origin:Wuhan, China

... fiber and are designed to provide consistent attenuation levels as well as maintaining polarization characteristics. Typical application for an optical pad attenuator is to reduce the amount of optical power by a specific amount as to not saturate a

Brand Name:GaPho

Model Number:Attenuator VOA

Place of Origin:China

...Optical Attenuator In-Line Optical Variable Attenuator VOA ◇ Specifications: Parameter Unit Specifics Operating Wavelength nm 1310/1550 1064 980 850 780 633 Wavelength Range nm ±40dB ±20dB ±20dB ±20dB ±20dB ±20dB Attenuation Range dB 0~60dB (Manually runed variable) Attenuation Accuracy dB ≤0.2dB Insertion Losse dB ≤0.8 ≤0.8 ≤0.8 ≤0.8 ≤0.8 ≤0.8 Return Loss dB ≥55 dB PDL dB ≤0.15 Fiber Type SMF28e/HI1060 or Specify Optical...

Place of Origin:China

Brand Name:TTI Fiber

Model Number:FA-LC

...Optional Return Loss PC≥50dB, APC≥60dB Wavelength 1310nm or 1550nm Attenuation Range 0 - 30 dB Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.

Brand Name:YOGEL

Model Number:NO

Place of Origin:CHINA

...tem for the on-line testing, therefore, it can be used in the digital system of communication devices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV) Features stepwise attenuating by circumgyrated dial: attenuating step 0

Brand Name:CY COM

Model Number:SC Female to male

Place of Origin:Shenzhen China

...Optical Variable Attenuator Introduction: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Features: Low back reflection and Low PDL High precision attenuation value Precision control of attenuation...

Brand Name:ZGT

Model Number:ZZTAT-FC3-M2

Place of Origin:SHENZHEN,CHINA

...variable attenuator compatible with all standard Optic equipment You are here: Home > Products > Fiber optic Attenuator Serial Number: ZZTAT-FC3-M2 Description: ZGT provide fixed attenuators and variable attenuators, with different connectors such as SC, SC/APC, LC, LC/APC, FC, FC/APC, ST, MU, E2000, E2000/APC and Hybrid Attenuators. There are adapter version and plug in version, attenuation...

Brand Name:OPTFOCUS

Model Number:OFS-AT-SLA-AXX

Place of Origin:Guangdong, China (Mainland)

Passive Parts Fiber Optic Variable Attenuator LC - APC Adaptor Type 1310nm SC,LC FC,ST PC/APC Fiber Optic Attenuator Specifications: Fiber Optic Attenuator attenuation fiber inside 0dB - 30dB attenution SC,LC,FC,ST,MU Optional SM or MM Optional Features 1....

Brand Name:YINGDA

Model Number:ATTN-FCS-VOA-01

Place of Origin:china

...receiver sensitivity, usually place in the optical receiver input to adjust receiving light power. It is in the middle of fiber connector, suitable for all kinds of fibre optic connector with all high performance of connectors. When use optical attenuator,

Categories:Fiber Optic Accessories

Country/Region:china

...Optic Attenuatorr Fiber optic attenuator as a kind of optical passive device is used in optical communication system, debugging the optical power and the calibration correction of optical instrument, attenuating fiber optic signal. It is made of attenuated fiber which includes metal ion and can adjust the light power to the required level. Optical fiber communication systems, optical fiber CATV and high power optical...

Brand Name:UNIFIBER-OEM

Model Number:MVOASC

Place of Origin:CHINA

...permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they

Brand Name:TTI/OEM/ODM

Model Number:LC-LC

Place of Origin:China

...Optic Attenuator Low Insertion Loss Feature: Low insertion loss and back reflection Definable attenuation from 1dB to 30dB PC, UPC and APC polish types Available with FC, SC, ST and LC terminations Zirconia or Phosphor Bronze Sleeve Single mode, Multi-mode Various Types of Connectors FC,SC,ST,MU,LC,MTRJ,MPO Low Splicing Loss Application: Fiber Optic...

Brand Name:ANC or customized

Model Number:0dB SC/APC Male to SC/UPC Female

Place of Origin:China

... Co., Limited changes Ultra Polish to Angle Polish with no loss in power. Male to female Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. Male to female Attenuator is