1000ml min flame test apparatus

Brand Name:YUYANG

Model Number:YYF023

Place of Origin:China

Gypsum Board In Burning Stability Tester Electronic Flammability Testing Equipment Application: Determine the stability of gypsum plasterboard subject to flame, the flame is generated from two dia. 40mm burner with dia. 2.5mm nozzle, the temperature of ...

Brand Name:vouch

Model Number:5600

Place of Origin:CHINA

...Flame Test Apparatus For Fire Resistance Test Instrument of Plastic material IEC60695-11-5 Needle Flame Test Apparatus For Electronic components Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials. This tester specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It

Brand Name:PEGO

Model Number:PG-NF

Place of Origin:China

...Flame Test Apparatus Electrical Safety Test Equipment 1. Introduction of Needle Flame Test Apparatus: ZY-2 Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame...

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Flame Test Apparatus Cables and Wires Flame Resistance Test Product information: This flammability test chamber meets the requirements of UL1581 and UL94 flame test. The effects of flames in the early stages of fire on electrical and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame test...

Brand Name:SKYLINE

Model Number:SL-SE03

Place of Origin:China

Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ...

Brand Name:DAXIAN

Model Number:UL 1685

Place of Origin:China

...Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable is evaluated by igniting the specimen with a vertically placed flame...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,

Brand Name:Kinte

Model Number:WH-8903A (ZY-1)

Place of Origin:Guangdong,China (Mainland)

..., etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques.

Brand Name:HOOHA

Place of Origin:China

...spread of flame,flame condition of ignition at multiple distances,critical flux,and total heat release value.It can also measure the burning characteristics of vertical specimen.After ...

Brand Name:KINGPO

220V 50Hz Ф0.9mm Needle Flame Test Apparatus Flowmeter Adjustment Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45...

Brand Name:GOLD

Model Number:GD-ASTM D1230

Place of Origin:China

... to textile fabric in under 45 ° combustion, determination of the damaged area and damage length determination of heat or melt number to provide exposure to the flame length.

Brand Name:AI

Model Number:NFT

Place of Origin:CHINA

Needle Flame Test Apparatus by IEC60695-11-5 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, ...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... test method – Apparatus, confirmatory test arrangement and guidance. Test sample: It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Feature: The

Place of Origin:China

Brand Name:KeRang

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance,

Brand Name:YUYANG

Model Number:YYF056

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual ...

Brand Name:Delta

Model Number:HTI

Place of Origin:China

...Flame Test Apparatus​ Introduction: A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2ºC when testing...

Brand Name:GC

Model Number:GC-UL94

Place of Origin:China

Laboratory UL94 Horizontal And Vertical Flame Resistance Tester For Plastic Product Introduction: The UL94 horizontal vertical flame chamber machine is a testing equipment used to evaluate the flammability of materials used in electrical and electronic ...

Brand Name:HTI

Model Number:HTB-066B

Place of Origin:Guangdong,China(Mainland)

...-resistant materials :wall and top material of Camping tentage Standard:CPAI-84:1995 clause 6 Flammability Test Method, Wall and Top Material Specification: Specimen size Wall and top material:90mm×300mm (±3mm) Burning Flame height 38±2mm(adjustable)

Place of Origin:China

Brand Name:CHENGFENG

The needle flame tester is suitable for testing the flame retardant performance of electronic components, electrical devices, mechanical parts, injection molded parts and other electrical products. This machine simulates the small flame generated inside...