10 mechanical tubing

Brand Name:New Era

Model Number:ASTM A513 Type5 DOM

Place of Origin:China

...Mechanical Tubing ASTM A513 Type5 Round Steel Tubing Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing...

Brand Name:TORICH

Model Number:A511/A511M

Place of Origin:ZHEJIANG, CHINA

...Mechanical Tube Standard A511/A511M Matrial MT 304, MT304L, MT309, MT309S, MT 310S, MT 316, MT316L, MT317, MT321, MT347 Size WT: 0.5-5 OD: 10-325 Length: as customers' requirement Regular Shape Round / Square / Rectangle / Oval Surface Treament Miror:600G/ 800G Satin:180G /240G /320G /400G Application For Mechanical...

Brand Name:Torich

Model Number:A519

Place of Origin:China

...# 10# 40Cr 20Cr 20CrMo 20CrMnTi 40MnMoV 42CrMo 10Mn2 15Cr 30CrMnSi Stanard GB/T8162 8163 ASTM A500 ...

Place of Origin:Jiangsu China (Mainland)

Brand Name:WX SYLAITH

Model Number:ASTM A519

... tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required.

Brand Name:SPEZILLA

Model Number:CuNi 95/5, C70400

Place of Origin:CHINA

..., erosion and biofouling and therefore are widely used in marine and offshore industries. C70600 - (90-10) Copper-Nickel is widely used in marine applications where resistance to both corrosion and biofouling is important. C71500 - (70-30) Copper-Nickel is

Categories:Steel Pipes & Tubes

Country/Region:china

... max / / 4130 0.28-0.33 0.15-0.35 0.40-0.60 0.040 max 0.040 max 0.15-0.25 0.80-1.10 4140 0.38-0.43 0.10-0.35 0.75-1.00 0.040 max 0.040 max 0.15-0.25 0.80-1.10 Mechanical Properties

Brand Name:HY

Place of Origin:China

...Tube , Mechanical Tubing Corrosion Resistant Detailed Product Description Cold drawn seamless tubes for mechanical and automotive components have the precise tolerance as per design purpose, especially for the small outside diameter and heavy wall tube which is beyond the limit of the welded tube size range. By cold drawing, the mechanical...

Brand Name:TORICH

Model Number:ASTM A513

Place of Origin:ZheJiang/China

...Tubing: Electric Resistance Welded Carbon Steel Tube Mechanical Tubing The ASTM A513 specification covers electric resistance welded carbon steel tubing for use as mechanical tubing. This standard outlines the requirements for mechanical properties, chemical composition, manufacturing methods, and dimensional tolerances of carbon steel tubes...

Brand Name:YUHONG

Model Number:B111 / SB111 C68700

Place of Origin:China,

...majority of its alloy consists of copper and a relatively small amount of nickel. While there are different grades on the market, one of the most common is a 90/10 grade copper-nickel tube, which, by the way, has an alloy that is 90% copper. In addition to

Brand Name:SunShine

Model Number:6mm to 323.9mm

Place of Origin:China

Specification Brand Name Baotuo Product name Carbon Steel Seamless Pipe Application Fluid Pipe, Boiler Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, OIL PIPE, Chemical Fertilizer Pipe, Structure Pipe, Other Alloy Or Not Is Alloy Section Shape Round OD 6mm - ...

Brand Name:UST

Model Number:OD 25-800mm; WT 2-150mm

Place of Origin:China

Mechanical Tubing , Medium Carbon Steel Tubing Hot Rolled Or Cold Drawn CK45 INTRODUCTION Medium carbon steel for mechanical engineering and automotive components. It is usually supplied untreated but can be supplied to order in the normalized or finally ...

Brand Name:Yuhong

Model Number:ASTM B111 C70600 Copper Nickle 90/10 Seamless Tube

Place of Origin:China

... alloy. This particular alloy consists of approximately 90% copper and 10% nickel, hence the designation "90/10." The ASTM B111 specification establishes the requirements for this type of seamless tube, which is commonly used in heat exchangers,

Brand Name:Techcore

Model Number:Tubing End Locator

Place of Origin:CHINA

... end locator is used to mechanically locate and determine the actual depth of the tubing end in relation to the measured wireline depth. The tubing end locator is composed of a grooved body and a locating key loaded by spring and fixed by pin in it. A

Brand Name:OEM/ODM

Model Number:Customized

Place of Origin:CHINA

205 Deg Stainless Steel Mechanical Tube Shrinking Machine for tube pier processing Specification Main Specifications 50 Type 76 Type 114 Type Mold Size(W*L*H) 50*300*...

Place of Origin:Tianjin China

Brand Name:Xinyue Steel

Model Number:Stainless Steel Pipe

..., EN 10217-7 TC 1/2, JIS G 3459, JIS G 3468, ISO 2037, etc. Certificate API 5LC, ISO 9001, etc Out Diameter 10.3mm - 2032mm Wall Thickness 0.5mm- 40mm Length 0.3m – 18m Surface Treatment Mirror, or per

Brand Name:YuHong

Model Number:ASTM B111 C70600 Copper Nickle 90/10 Seamless Tube

Place of Origin:China

... alloy. This particular alloy consists of approximately 90% copper and 10% nickel, hence the designation "90/10." The ASTM B111 specification establishes the requirements for this type of seamless tube, which is commonly used in heat exchangers,

Place of Origin:Jiangsu, China (Mainland)

Brand Name:WONDERY

Model Number:ZGJ

... contact between fins and tubes. Features The machine employs a combined electrical and hydraulic structure, which is small but compact. The electrical control system relies on a PLC controller to control the ...

Brand Name:MTSCO

Model Number:MTSCOST14

Place of Origin:CHINA

...10 Sanitary Tube With Bright Annealed And Cold Drawn Method , In Gas Industry Bright annealed sanitary tube has very clean inner surface . MTSCO has our own high technology , when tubes have been produced they already have cleaned inner surface , even though we haven’t cleaned them . Of cause , we’ll do clean later . So when we finished clean process , the tubes are totally clean enough ! MTSCO tubes...

Brand Name:FRANK STEEL

Model Number:ASTM A519

Place of Origin:P.R.CHINA

... time is 30 days. 1. Description We are specialized in exporting all kinds of ASTM A519 seamless steel tubes for machinery. These mechanical pipes are made of carbon steel and alloy steel by cold drawing or hot rolling. The chemical composition and